東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Development of Patient Based 3D Prin...

Senko, Jillian L.

FindBook

Google Book

Amazon

博客來

Development of Patient Based 3D Printed Cardiac Mitral Valve Phantoms.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Development of Patient Based 3D Printed Cardiac Mitral Valve Phantoms./
作者:	Senko, Jillian L.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2020,
面頁冊數:	91 p.
附註:	Source: Masters Abstracts International, Volume: 81-09.
Contained By:	Masters Abstracts International81-09.
標題:	Biomedical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=27736390
ISBN:	9781658421263

Development of Patient Based 3D Printed Cardiac Mitral Valve Phantoms.
Senko, Jillian L.

Development of Patient Based 3D Printed Cardiac Mitral Valve Phantoms. - Ann Arbor : ProQuest Dissertations & Theses, 2020 - 91 p.

Source: Masters Abstracts International, Volume: 81-09.

Thesis (M.S.)--State University of New York at Buffalo, 2020.

This item must not be sold to any third party vendors.

Currently, there is no satisfactory in-vitro mitral valve (MV) three-dimensional (3D) model able to represent accurately the chordae tendineae motion in a hemodynamic simulation. We propose to develop a method to design, 3D print, and post process a mitral valve phantom with all subvalvular structures embedded inside a left heart cardiac phantom. To achieve this, we needed to develop new approaches, which will address the current challenges associated with patient imaging and segmentation of MV, 3D printing of fine elastic structures, and post-printing support material removal from intricate structures. To develop the MV cardiac phantom we used ECG gated cardiac computed tomography (CT) scans to segment structures such as the annulus, leaflets, papillary muscles, left atrium, and left ventricle. Since fine structures are blurred out due to cardiac motion, we used interpolation methods to render the chordae tendineae and attach the chordae to the relevant topology on the underside of the leaflets in compliance with reported diameters and count of chordae from autopsied cadaver hearts. The 3D modified MV was embedded into patient specific cardiac chambers to develop a flow phantom to be tested under hemodynamic simulations. Iterations of the phantom were 3D printed on a Stratasys J750 Digital Anatomy Printer and an Objet Eden 260V 3D printer in various elastic and support materials. Post print support material required 5 to 9-day continuous agitation in basic sodium hydroxide (NaOH) baths to gradually dissolve support and preserve the delicate chordae. The geometry of the systolic, closed, state MV cardiac phantom showed relevant leaflet movement. Our method of phantom design, 3D printing, and post print processing utilizes non-conventional design tactics and elastic 3D printed materials to generate a phantom that closely resembles the mitral valve chordae and shows initial promise to function in a hemodynamic environment.

ISBN: 9781658421263Subjects--Topical Terms:

535387
Biomedical engineering.
Subjects--Index Terms:

3D printing

Development of Patient Based 3D Printed Cardiac Mitral Valve Phantoms.
LDR:03172nmm a2200397 4500 001 2271693
005 20201030090749.5
008 220629s2020 ||||||||||||||||| ||eng d
020 $a 9781658421263
035 $a (MiAaPQ)AAI27736390
035 $a AAI27736390
040 $a MiAaPQ $c MiAaPQ
100 1 $a Senko, Jillian L. $3 3549105
245 1 0 $a Development of Patient Based 3D Printed Cardiac Mitral Valve Phantoms.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2020
300 $a 91 p.
500 $a Source: Masters Abstracts International, Volume: 81-09.
500 $a Advisor: Ionita, Ciprian N.
502 $a Thesis (M.S.)--State University of New York at Buffalo, 2020.
506 $a This item must not be sold to any third party vendors.
506 $a This item must not be sold to any third party vendors.
520 $a Currently, there is no satisfactory in-vitro mitral valve (MV) three-dimensional (3D) model able to represent accurately the chordae tendineae motion in a hemodynamic simulation. We propose to develop a method to design, 3D print, and post process a mitral valve phantom with all subvalvular structures embedded inside a left heart cardiac phantom. To achieve this, we needed to develop new approaches, which will address the current challenges associated with patient imaging and segmentation of MV, 3D printing of fine elastic structures, and post-printing support material removal from intricate structures. To develop the MV cardiac phantom we used ECG gated cardiac computed tomography (CT) scans to segment structures such as the annulus, leaflets, papillary muscles, left atrium, and left ventricle. Since fine structures are blurred out due to cardiac motion, we used interpolation methods to render the chordae tendineae and attach the chordae to the relevant topology on the underside of the leaflets in compliance with reported diameters and count of chordae from autopsied cadaver hearts. The 3D modified MV was embedded into patient specific cardiac chambers to develop a flow phantom to be tested under hemodynamic simulations. Iterations of the phantom were 3D printed on a Stratasys J750 Digital Anatomy Printer and an Objet Eden 260V 3D printer in various elastic and support materials. Post print support material required 5 to 9-day continuous agitation in basic sodium hydroxide (NaOH) baths to gradually dissolve support and preserve the delicate chordae. The geometry of the systolic, closed, state MV cardiac phantom showed relevant leaflet movement. Our method of phantom design, 3D printing, and post print processing utilizes non-conventional design tactics and elastic 3D printed materials to generate a phantom that closely resembles the mitral valve chordae and shows initial promise to function in a hemodynamic environment.
590 $a School code: 0656.
650 4 $a Biomedical engineering. $3 535387
650 4 $a Medical imaging. $3 3172799
650 4 $a Medicine. $3 641104
653 $a 3D printing
653 $a Cardiac
653 $a Cardiac CT
653 $a Chordae
653 $a Medical imaging
653 $a Mitral valve
690 $a 0541
690 $a 0574
690 $a 0564
710 2 $a State University of New York at Buffalo. $b Biomedical Engineering. $3 3191314
773 0 $t Masters Abstracts International $g 81-09.
790 $a 0656
791 $a M.S.
792 $a 2020
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=27736390