東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Development of Actuators Using Mater...

Fernandez, Alfonso.

FindBook

Google Book

Amazon

博客來

Development of Actuators Using Material Extrusion Additive Manufacturing with Embedded Shape Memory Alloy Wire.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Development of Actuators Using Material Extrusion Additive Manufacturing with Embedded Shape Memory Alloy Wire./
作者:	Fernandez, Alfonso.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2019,
面頁冊數:	73 p.
附註:	Source: Masters Abstracts International, Volume: 81-03.
Contained By:	Masters Abstracts International81-03.
標題:	Mechanical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13886847
ISBN:	9781088327838

Development of Actuators Using Material Extrusion Additive Manufacturing with Embedded Shape Memory Alloy Wire.
Fernandez, Alfonso.

Development of Actuators Using Material Extrusion Additive Manufacturing with Embedded Shape Memory Alloy Wire. - Ann Arbor : ProQuest Dissertations & Theses, 2019 - 73 p.

Source: Masters Abstracts International, Volume: 81-03.

Thesis (M.S.)--The University of Texas at El Paso, 2019.

This item must not be sold to any third party vendors.

Over the past several decades, the advancements in Additive Manufacturing (AM) technologies have opened a wide variety of applications where AM can be used. Some examples of these advancements are the introduction of automatic wire embedding capabilities, the introduction of multi-material processing and the printing of thermoplastic elastomers. With the availability of these advancements, it is now possible to create spark-free, dust-free actuation mechanisms for applications where it is crucial that no spark is generated (i.e. space shuttle fuel valve). In this research, a Lulzbot TAZ 6 desktop material extrusion system was utilized to print parts out of Plasticized Copolymer Thermoplastic Elastomer (PCTPE) with manually embedded Flexinol shape memory alloy (SMA) wire to create 3D printed movable parts that could be used for actuation in larger systems. The part's motion relies upon the activation of the SMA and on the recovery of the initial shape by the polymer's stiffness, when the wire ceases to be activated. This activation was achieved by joule heating, where the current input was calculated using a heat transfer mathematical model. The design was driven by dimensions obtained through bending stress calculations that modeled the force exerted by the activated wire on the polymer surrounding the wire. The design based on the calculations was fabricated and reproduced a motion of ~1.8 mm. It is concluded that actuators are possible to be created using AM with the embedding of SMA wires; however, the design for fabrication can be very limited.

ISBN: 9781088327838Subjects--Topical Terms:

649730
Mechanical engineering.
Subjects--Index Terms:

3D Printed Actuators

Development of Actuators Using Material Extrusion Additive Manufacturing with Embedded Shape Memory Alloy Wire.
LDR:02867nmm a2200409 4500 001 2269046
005 20200908082318.5
008 220629s2019 ||||||||||||||||| ||eng d
020 $a 9781088327838
035 $a (MiAaPQ)AAI13886847
035 $a AAI13886847
040 $a MiAaPQ $c MiAaPQ
100 1 $a Fernandez, Alfonso. $3 3546350
245 1 0 $a Development of Actuators Using Material Extrusion Additive Manufacturing with Embedded Shape Memory Alloy Wire.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2019
300 $a 73 p.
500 $a Source: Masters Abstracts International, Volume: 81-03.
500 $a Advisor: Wicker, Ryan B.;Espalin, David.
502 $a Thesis (M.S.)--The University of Texas at El Paso, 2019.
506 $a This item must not be sold to any third party vendors.
520 $a Over the past several decades, the advancements in Additive Manufacturing (AM) technologies have opened a wide variety of applications where AM can be used. Some examples of these advancements are the introduction of automatic wire embedding capabilities, the introduction of multi-material processing and the printing of thermoplastic elastomers. With the availability of these advancements, it is now possible to create spark-free, dust-free actuation mechanisms for applications where it is crucial that no spark is generated (i.e. space shuttle fuel valve). In this research, a Lulzbot TAZ 6 desktop material extrusion system was utilized to print parts out of Plasticized Copolymer Thermoplastic Elastomer (PCTPE) with manually embedded Flexinol shape memory alloy (SMA) wire to create 3D printed movable parts that could be used for actuation in larger systems. The part's motion relies upon the activation of the SMA and on the recovery of the initial shape by the polymer's stiffness, when the wire ceases to be activated. This activation was achieved by joule heating, where the current input was calculated using a heat transfer mathematical model. The design was driven by dimensions obtained through bending stress calculations that modeled the force exerted by the activated wire on the polymer surrounding the wire. The design based on the calculations was fabricated and reproduced a motion of ~1.8 mm. It is concluded that actuators are possible to be created using AM with the embedding of SMA wires; however, the design for fabrication can be very limited.
590 $a School code: 0459.
650 4 $a Mechanical engineering. $3 649730
650 4 $a Polymer chemistry. $3 3173488
650 4 $a Materials science. $3 543314
650 4 $a Nanotechnology. $3 526235
650 4 $a Plastics. $3 649803
650 4 $a Electrical engineering. $3 649834
653 $a 3D Printed Actuators
653 $a Additive Manufacturing
653 $a Advanced Manufacturing
653 $a Hybrid Additive Manufacturing
653 $a Wire Embedding
690 $a 0548
690 $a 0544
690 $a 0794
690 $a 0795
690 $a 0652
690 $a 0495
710 2 $a The University of Texas at El Paso. $b Mechanical Engin.. $3 3177246
773 0 $t Masters Abstracts International $g 81-03.
790 $a 0459
791 $a M.S.
792 $a 2019
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13886847