東華大學圖書館 |

New approaches to gear design and production

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	New approaches to gear design and production/ edited by Veniamin Goldfarb, Evgenii Trubachev, Natalya Barmina.
其他作者:	Goldfarb, Veniamin.
出版者:	Cham :Springer International Publishing : : 2020.,
面頁冊數:	xiii, 529 p. :ill., digital ;24 cm.
內容註:	Foreword by Marco Ceccarelli -- Preface -- Introduction -- Advanced computer-aided gear design, analysis and manufacturing -- Tooth contact analysis of cylindrical gears reconstructed from point clouds -- Simulation of the teeth profile shaping during the finishing of gears -- Tooth surface stress and flash temperature analysis with trochoid interference of gears -- Computer-aided techniques versus analytical methods for tooth gear calculations -- Optimization of planocentric gear train characteristics with CA tools -- Biplanetary gear trains and their analysis through the torque method -- Curvature interference characteristic of ZC1 worm gear -- Engineering assessment of load-carrying capacity and tribotechnical parameters of spur gears with account of tooth profile correction and variation of sliding friction factor in gearing -- Approaches to computer-aided design of spur and helical gear production processes with account of patterns for generation and variation of quality parameters of gears at their production -- Aspects of the kinematic theory of spatial transformations of rotations: analytic and software synthesis of kinematic pitch configurations -- Engineering design of gears with involute-bevel gearwheels via application of additive techniques -- Chapter with no title yet -- Design analysis of geometry of bevel gearwheels made by stamping method -- Features of designing the power elements of drives with high load-carrying capacity -- Analysis and prospects of application of bevel gears with variable gear ratio in foldable antenna mechanisms -- Vibration monitoring of mechanisms and aggregates with broadband spectrum of vibration -- Features of parameter selection for worm gears with steel gearwheels -- New geometry and geometric and kinematic parameters of gears and machine-tool gearing: concepts, terminology and development of the theory of kinematic generation of surfaces -- Capabilities of computer-aided design of worm-type gears by means of "SPDIAL+" software -- New approach to computer-aided design of gearbox systems: models and algorithms -- Numerical simulation of elastic and plastic contact of heavy-loaded spiroid gears -- Possibilities of cutting bevel gearwheel teeth by hobs -- Simulation of gears and gear trains within the MMS study course -- New approach to computer-aided design of gearbox systems: conception and development of information support.
Contained By:	Springer eBooks
標題:	Gearing - Design. -
電子資源:	https://doi.org/10.1007/978-3-030-34945-5
ISBN:	9783030349455

New approaches to gear design and production
New approaches to gear design and production[electronic resource] /edited by Veniamin Goldfarb, Evgenii Trubachev, Natalya Barmina. - Cham :Springer International Publishing :2020. - xiii, 529 p. :ill., digital ;24 cm. - Mechanisms and machine science,v.812211-0984 ;. - Mechanisms and machine science ;v.81..

Foreword by Marco Ceccarelli -- Preface -- Introduction -- Advanced computer-aided gear design, analysis and manufacturing -- Tooth contact analysis of cylindrical gears reconstructed from point clouds -- Simulation of the teeth profile shaping during the finishing of gears -- Tooth surface stress and flash temperature analysis with trochoid interference of gears -- Computer-aided techniques versus analytical methods for tooth gear calculations -- Optimization of planocentric gear train characteristics with CA tools -- Biplanetary gear trains and their analysis through the torque method -- Curvature interference characteristic of ZC1 worm gear -- Engineering assessment of load-carrying capacity and tribotechnical parameters of spur gears with account of tooth profile correction and variation of sliding friction factor in gearing -- Approaches to computer-aided design of spur and helical gear production processes with account of patterns for generation and variation of quality parameters of gears at their production -- Aspects of the kinematic theory of spatial transformations of rotations: analytic and software synthesis of kinematic pitch configurations -- Engineering design of gears with involute-bevel gearwheels via application of additive techniques -- Chapter with no title yet -- Design analysis of geometry of bevel gearwheels made by stamping method -- Features of designing the power elements of drives with high load-carrying capacity -- Analysis and prospects of application of bevel gears with variable gear ratio in foldable antenna mechanisms -- Vibration monitoring of mechanisms and aggregates with broadband spectrum of vibration -- Features of parameter selection for worm gears with steel gearwheels -- New geometry and geometric and kinematic parameters of gears and machine-tool gearing: concepts, terminology and development of the theory of kinematic generation of surfaces -- Capabilities of computer-aided design of worm-type gears by means of "SPDIAL+" software -- New approach to computer-aided design of gearbox systems: models and algorithms -- Numerical simulation of elastic and plastic contact of heavy-loaded spiroid gears -- Possibilities of cutting bevel gearwheel teeth by hobs -- Simulation of gears and gear trains within the MMS study course -- New approach to computer-aided design of gearbox systems: conception and development of information support.

This is the third book in a series devoted to gear design and production. Comprising papers by scientists and gear experts from around the globe, it covers recent developments in practically all spheres of mechanical engineering related to gears and transmissions. It describes advanced approaches to research, design, testing and production of various kinds of gears for a vast range of applications, with a particular focuses on advanced computer-aided approaches for gear analysis, simulation and design, the application of new materials and tribological issues.

ISBN: 9783030349455

Standard No.: 10.1007/978-3-030-34945-5doiSubjects--Topical Terms:

3447367
Gearing
--Design.

LC Class. No.: TJ184 / .N493 2020

Dewey Class. No.: 621.833

New approaches to gear design and production
LDR:04035nmm a2200337 a 4500 001 2215665
003 DE-He213
005 20200620112546.0
006 m d
007 cr nn 008maaau
008 201120s2020 sz s 0 eng d
020 $a 9783030349455 $q (electronic bk.)
020 $a 9783030349448 $q (paper)
024 7 $a 10.1007/978-3-030-34945-5 $2 doi
035 $a 978-3-030-34945-5
040 $a GP $c GP
041 0 $a eng
050 4 $a TJ184 $b .N493 2020
072 7 $a TGB $2 bicssc
072 7 $a TEC009070 $2 bisacsh
072 7 $a TGB $2 thema
082 0 4 $a 621.833 $2 23
090 $a TJ184 $b .N532 2020
245 0 0 $a New approaches to gear design and production $h [electronic resource] / $c edited by Veniamin Goldfarb, Evgenii Trubachev, Natalya Barmina.
260 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2020.
300 $a xiii, 529 p. : $b ill., digital ; $c 24 cm.
490 1 $a Mechanisms and machine science, $x 2211-0984 ; $v v.81
505 0 $a Foreword by Marco Ceccarelli -- Preface -- Introduction -- Advanced computer-aided gear design, analysis and manufacturing -- Tooth contact analysis of cylindrical gears reconstructed from point clouds -- Simulation of the teeth profile shaping during the finishing of gears -- Tooth surface stress and flash temperature analysis with trochoid interference of gears -- Computer-aided techniques versus analytical methods for tooth gear calculations -- Optimization of planocentric gear train characteristics with CA tools -- Biplanetary gear trains and their analysis through the torque method -- Curvature interference characteristic of ZC1 worm gear -- Engineering assessment of load-carrying capacity and tribotechnical parameters of spur gears with account of tooth profile correction and variation of sliding friction factor in gearing -- Approaches to computer-aided design of spur and helical gear production processes with account of patterns for generation and variation of quality parameters of gears at their production -- Aspects of the kinematic theory of spatial transformations of rotations: analytic and software synthesis of kinematic pitch configurations -- Engineering design of gears with involute-bevel gearwheels via application of additive techniques -- Chapter with no title yet -- Design analysis of geometry of bevel gearwheels made by stamping method -- Features of designing the power elements of drives with high load-carrying capacity -- Analysis and prospects of application of bevel gears with variable gear ratio in foldable antenna mechanisms -- Vibration monitoring of mechanisms and aggregates with broadband spectrum of vibration -- Features of parameter selection for worm gears with steel gearwheels -- New geometry and geometric and kinematic parameters of gears and machine-tool gearing: concepts, terminology and development of the theory of kinematic generation of surfaces -- Capabilities of computer-aided design of worm-type gears by means of "SPDIAL+" software -- New approach to computer-aided design of gearbox systems: models and algorithms -- Numerical simulation of elastic and plastic contact of heavy-loaded spiroid gears -- Possibilities of cutting bevel gearwheel teeth by hobs -- Simulation of gears and gear trains within the MMS study course -- New approach to computer-aided design of gearbox systems: conception and development of information support.
520 $a This is the third book in a series devoted to gear design and production. Comprising papers by scientists and gear experts from around the globe, it covers recent developments in practically all spheres of mechanical engineering related to gears and transmissions. It describes advanced approaches to research, design, testing and production of various kinds of gears for a vast range of applications, with a particular focuses on advanced computer-aided approaches for gear analysis, simulation and design, the application of new materials and tribological issues.
650 0 $a Gearing $x Design. $3 3447367
650 0 $a Gearing $x Manufacture. $3 3447372
650 1 4 $a Mechanical Engineering. $3 891038
650 2 4 $a Industrial and Production Engineering. $3 891024
650 2 4 $a Software Engineering/Programming and Operating Systems. $3 891214
650 2 4 $a Computer-Aided Engineering (CAD, CAE) and Design. $3 892568
700 1 $a Goldfarb, Veniamin. $3 2179106
700 1 $a Trubachev, Evgenii. $3 3295497
700 1 $a Barmina, Natalya. $3 2179107
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer eBooks
830 0 $a Mechanisms and machine science ; $v v.81. $3 3447371
856 4 0 $u https://doi.org/10.1007/978-3-030-34945-5
950 $a Engineering (Springer-11647)