東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Design Principles for Lab-in-a-Photo...

Al Rashid, Mohammed Abdullah.

FindBook

Google Book

Amazon

博客來

Design Principles for Lab-in-a-Photonic-Crystal Biosensors.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Design Principles for Lab-in-a-Photonic-Crystal Biosensors./
作者:	Al Rashid, Mohammed Abdullah.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2018,
面頁冊數:	126 p.
附註:	Source: Dissertations Abstracts International, Volume: 80-05, Section: B.
Contained By:	Dissertations Abstracts International80-05B.
標題:	Nanotechnology. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10937604
ISBN:	9780438681415

Design Principles for Lab-in-a-Photonic-Crystal Biosensors.
Al Rashid, Mohammed Abdullah.

Design Principles for Lab-in-a-Photonic-Crystal Biosensors. - Ann Arbor : ProQuest Dissertations & Theses, 2018 - 126 p.

Source: Dissertations Abstracts International, Volume: 80-05, Section: B.

Thesis (Ph.D.)--University of Toronto (Canada), 2018.

This item must not be sold to any third party vendors.

A new class of photonic crystal biosensors, geared towards rapid biomedical diagnostics at the point-of-care, is proposed. These Lab-in-a-Photonic-Crystal devices employ cascaded transmission of light through a photonic band-gap material by leveraging the interaction of surface modes at entry and exit termini with waveguide modes in centrally-embedded line-defects. A rich spectral signature, composed of conventional resonance-shifts complemented by transmission-level modulation, enables these devices to discriminate between combinations of various bio-markers, attached as thin layers to the surface and line-defect artifacts. An initial two-dimensional conceptual paradigm is proposed, and then developed into a full-fledged, fabrication-feasible, three-dimensional design. The final design consists of a high-index nano-pillar array forming a two-dimensional, fluid-infiltrated photonic crystal with two surface gratings and a central waveguide, whose optical modes are trapped by index-guiding in the third dimension. The nano-pillars are housed in a glass trough, while being open to fluid at the top, allowing easy addition of bio-fluid samples onto the device, and helping prevent clogs due to macroscopic suspended impurities. The design is further optimized, both optically and structurally, by the introduction of a thin-layer of high-index backing material between the nano-pillars and the glass trough substrate, reducing nano-pillar height by half of the unbacked-design height. The system is capable of detecting all eight possible combinations of up to three distinct bio-markers, with the possibility to increase the number of sensed bio-markers through the use of multi-mode waveguides (and potentially, multi-mode surfaces). Using index-guided bulk modes of the three-dimensional structure, a mechanism for calibrating the device under impurity-induced variations in fluid refractive index is proposed. The Lab-in-a-Photonic-Crystal device is suitable for the detection of multiple diseases, or multiple stages of a given disease, in a single optical measurement. Its functionality, as well as robustness to imperfect fabrication, has been validated using Finite-Difference Time-Domain solutions to Maxwell's Equations.

ISBN: 9780438681415Subjects--Topical Terms:

526235
Nanotechnology.

Design Principles for Lab-in-a-Photonic-Crystal Biosensors.
LDR:03321nmm a2200337 4500 001 2209000
005 20191025102630.5
008 201008s2018 ||||||||||||||||| ||eng d
020 $a 9780438681415
035 $a (MiAaPQ)AAI10937604
035 $a (MiAaPQ)toronto:18344
035 $a AAI10937604
040 $a MiAaPQ $c MiAaPQ
100 1 $a Al Rashid, Mohammed Abdullah. $3 3436078
245 1 0 $a Design Principles for Lab-in-a-Photonic-Crystal Biosensors.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2018
300 $a 126 p.
500 $a Source: Dissertations Abstracts International, Volume: 80-05, Section: B.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: John, Sajeev.
502 $a Thesis (Ph.D.)--University of Toronto (Canada), 2018.
506 $a This item must not be sold to any third party vendors.
520 $a A new class of photonic crystal biosensors, geared towards rapid biomedical diagnostics at the point-of-care, is proposed. These Lab-in-a-Photonic-Crystal devices employ cascaded transmission of light through a photonic band-gap material by leveraging the interaction of surface modes at entry and exit termini with waveguide modes in centrally-embedded line-defects. A rich spectral signature, composed of conventional resonance-shifts complemented by transmission-level modulation, enables these devices to discriminate between combinations of various bio-markers, attached as thin layers to the surface and line-defect artifacts. An initial two-dimensional conceptual paradigm is proposed, and then developed into a full-fledged, fabrication-feasible, three-dimensional design. The final design consists of a high-index nano-pillar array forming a two-dimensional, fluid-infiltrated photonic crystal with two surface gratings and a central waveguide, whose optical modes are trapped by index-guiding in the third dimension. The nano-pillars are housed in a glass trough, while being open to fluid at the top, allowing easy addition of bio-fluid samples onto the device, and helping prevent clogs due to macroscopic suspended impurities. The design is further optimized, both optically and structurally, by the introduction of a thin-layer of high-index backing material between the nano-pillars and the glass trough substrate, reducing nano-pillar height by half of the unbacked-design height. The system is capable of detecting all eight possible combinations of up to three distinct bio-markers, with the possibility to increase the number of sensed bio-markers through the use of multi-mode waveguides (and potentially, multi-mode surfaces). Using index-guided bulk modes of the three-dimensional structure, a mechanism for calibrating the device under impurity-induced variations in fluid refractive index is proposed. The Lab-in-a-Photonic-Crystal device is suitable for the detection of multiple diseases, or multiple stages of a given disease, in a single optical measurement. Its functionality, as well as robustness to imperfect fabrication, has been validated using Finite-Difference Time-Domain solutions to Maxwell's Equations.
590 $a School code: 0779.
650 4 $a Nanotechnology. $3 526235
650 4 $a Optics. $3 517925
650 4 $a Biophysics. $3 518360
690 $a 0652
690 $a 0752
690 $a 0786
710 2 $a University of Toronto (Canada). $b Physics. $3 3171865
773 0 $t Dissertations Abstracts International $g 80-05B.
790 $a 0779
791 $a Ph.D.
792 $a 2018
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10937604