東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Effect of Different Fabrication Proc...

Alhenaki, Aasem Mutlaq.

FindBook

Google Book

Amazon

博客來

Effect of Different Fabrication Processes and Coloring on the Properties of Monolithic Alumina.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Effect of Different Fabrication Processes and Coloring on the Properties of Monolithic Alumina./
作者:	Alhenaki, Aasem Mutlaq.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2019,
面頁冊數:	88 p.
附註:	Source: Dissertations Abstracts International, Volume: 80-12, Section: B.
Contained By:	Dissertations Abstracts International80-12B.
標題:	Dentistry. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13884541
ISBN:	9781392173954

Effect of Different Fabrication Processes and Coloring on the Properties of Monolithic Alumina.
Alhenaki, Aasem Mutlaq.

Effect of Different Fabrication Processes and Coloring on the Properties of Monolithic Alumina. - Ann Arbor : ProQuest Dissertations & Theses, 2019 - 88 p.

Source: Dissertations Abstracts International, Volume: 80-12, Section: B.

Thesis (D.Sc.D.)--Boston University, 2019.

This item must not be sold to any third party vendors.

Objectives: To investigate the effect of different alumina fabrication techniques and sintering temperatures on the biaxial flexural strength. Also, to assess the resulting color of multiple metal salt solutions at different concentrations in monolithic alumina and its effect on the optical properties of the restoration.Material & Method: Forty disk-shape alumina specimens were divided into 4 groups (n=10) based on the fabrication process (slip cast or die press) and sintering temperature (1530°C or 1600°C). Biaxial flexural strength was calculated using universal testing machine at a crosshead speed rate of 0.5 mm/min until failure occurred. For the coloring part of the study, nine elements (Ba, Ce, Cr, Fe, Mn, Nd, Pr, Sm, Zn) were used to form metal-salt coloring solutions at a concentration of 0.1%, 1% and 5% wt. The solutions were then used to infuse 162 pre-sintered porous alumina disks that are either slip-casted (A1000) or die-pressed (CT3000). Color coordinates were recorded in CIE L*a*b* system using spectrophotometer. Color differences relative to the control (ΔE), translucency parameter (TP), contrast ratio (CR) and total transmission were calculated and analyzed using two-way analysis of variance (ANOVA) with Tukey post hoc test at α = 0.05. Results: Slip cast group sintered at 1530°C had the highest flexural strength (479.14 MPa), but there was no significant difference between the four groups neither by fabrication process (p = 0.127) nor by sintering temperature (p = 0.276). Die press specimens colored with Ba at 0.1% and 1% showed significantly higher TP (2.65 and 2.49) and lowest CR (96.15 and 96.30) among the groups. There was a statistically significant effect on TP and CR when changing alumina powder on specimens colored by Ba, Ce, and Zn (p < 0.05). Changing the concentration of the coloring solution caused a significant effect on the optical properties of specimens colored by Ba, Nd, Cr, Mn. ΔE was significantly changed when changing alumina powder and coloring concentration for all elements except Ce, Pr, and Sm. Conclusion: Changing fabrication method and sintering temperature did not affect the biaxial flexural strength. However, the fabrication method and metal-salt colorant concentration affected the optical properties of the specimens.

ISBN: 9781392173954Subjects--Topical Terms:

828971
Dentistry.

Effect of Different Fabrication Processes and Coloring on the Properties of Monolithic Alumina.
LDR:03374nmm a2200313 4500 001 2207300
005 20190916101816.5
008 201008s2019 ||||||||||||||||| ||eng d
020 $a 9781392173954
035 $a (MiAaPQ)AAI13884541
035 $a (MiAaPQ)bu:14767
035 $a AAI13884541
040 $a MiAaPQ $c MiAaPQ
100 1 $a Alhenaki, Aasem Mutlaq. $3 3434278
245 1 0 $a Effect of Different Fabrication Processes and Coloring on the Properties of Monolithic Alumina.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2019
300 $a 88 p.
500 $a Source: Dissertations Abstracts International, Volume: 80-12, Section: B.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: Giordano II, Russell.
502 $a Thesis (D.Sc.D.)--Boston University, 2019.
506 $a This item must not be sold to any third party vendors.
520 $a Objectives: To investigate the effect of different alumina fabrication techniques and sintering temperatures on the biaxial flexural strength. Also, to assess the resulting color of multiple metal salt solutions at different concentrations in monolithic alumina and its effect on the optical properties of the restoration.Material & Method: Forty disk-shape alumina specimens were divided into 4 groups (n=10) based on the fabrication process (slip cast or die press) and sintering temperature (1530°C or 1600°C). Biaxial flexural strength was calculated using universal testing machine at a crosshead speed rate of 0.5 mm/min until failure occurred. For the coloring part of the study, nine elements (Ba, Ce, Cr, Fe, Mn, Nd, Pr, Sm, Zn) were used to form metal-salt coloring solutions at a concentration of 0.1%, 1% and 5% wt. The solutions were then used to infuse 162 pre-sintered porous alumina disks that are either slip-casted (A1000) or die-pressed (CT3000). Color coordinates were recorded in CIE L*a*b* system using spectrophotometer. Color differences relative to the control (ΔE), translucency parameter (TP), contrast ratio (CR) and total transmission were calculated and analyzed using two-way analysis of variance (ANOVA) with Tukey post hoc test at α = 0.05. Results: Slip cast group sintered at 1530°C had the highest flexural strength (479.14 MPa), but there was no significant difference between the four groups neither by fabrication process (p = 0.127) nor by sintering temperature (p = 0.276). Die press specimens colored with Ba at 0.1% and 1% showed significantly higher TP (2.65 and 2.49) and lowest CR (96.15 and 96.30) among the groups. There was a statistically significant effect on TP and CR when changing alumina powder on specimens colored by Ba, Ce, and Zn (p < 0.05). Changing the concentration of the coloring solution caused a significant effect on the optical properties of specimens colored by Ba, Nd, Cr, Mn. ΔE was significantly changed when changing alumina powder and coloring concentration for all elements except Ce, Pr, and Sm. Conclusion: Changing fabrication method and sintering temperature did not affect the biaxial flexural strength. However, the fabrication method and metal-salt colorant concentration affected the optical properties of the specimens.
590 $a School code: 0017.
650 4 $a Dentistry. $3 828971
690 $a 0567
710 2 $a Boston University. $b Prosthodontics. $3 3434279
773 0 $t Dissertations Abstracts International $g 80-12B.
790 $a 0017
791 $a D.Sc.D.
792 $a 2019
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13884541