東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Three-Dimensional Microwave Imaging ...

Scott, Simon.

FindBook

Google Book

Amazon

博客來

Three-Dimensional Microwave Imaging for Indoor Environments.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Three-Dimensional Microwave Imaging for Indoor Environments./
作者:	Scott, Simon.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
面頁冊數:	130 p.
附註:	Source: Dissertation Abstracts International, Volume: 79-07(E), Section: B.
Contained By:	Dissertation Abstracts International79-07B(E).
標題:	Electrical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10620750
ISBN:	9780355577167

Three-Dimensional Microwave Imaging for Indoor Environments.
Scott, Simon.

Three-Dimensional Microwave Imaging for Indoor Environments. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 130 p.

Source: Dissertation Abstracts International, Volume: 79-07(E), Section: B.

Thesis (Ph.D.)--University of California, Berkeley, 2017.

Microwave imaging involves the use of antenna arrays, operating at microwave and millimeter-wave frequencies, for capturing images of real-world objects. Typically, one or more antennas in the array illuminate the scene with a radio-frequency (RF) signal. Part of this signal reflects back to the other antennas, which record both the amplitude and phase of the reflected signal. These reflected RF signals are then processed to form an image of the scene.

ISBN: 9780355577167Subjects--Topical Terms:

649834
Electrical engineering.

Three-Dimensional Microwave Imaging for Indoor Environments.
LDR:04996nmm a2200361 4500 001 2200964
005 20190329144316.5
008 201008s2017 ||||||||||||||||| ||eng d
020 $a 9780355577167
035 $a (MiAaPQ)AAI10620750
035 $a (MiAaPQ)berkeley:17354
035 $a AAI10620750
040 $a MiAaPQ $c MiAaPQ
100 1 $a Scott, Simon. $3 3427694
245 1 0 $a Three-Dimensional Microwave Imaging for Indoor Environments.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 130 p.
500 $a Source: Dissertation Abstracts International, Volume: 79-07(E), Section: B.
500 $a Adviser: John Wawrzynek.
502 $a Thesis (Ph.D.)--University of California, Berkeley, 2017.
520 $a Microwave imaging involves the use of antenna arrays, operating at microwave and millimeter-wave frequencies, for capturing images of real-world objects. Typically, one or more antennas in the array illuminate the scene with a radio-frequency (RF) signal. Part of this signal reflects back to the other antennas, which record both the amplitude and phase of the reflected signal. These reflected RF signals are then processed to form an image of the scene.
520 $a This work focuses on using planar antenna arrays, operating between 17 and 26 GHz, to capture three-dimensional images of people and other objects inside a room. Such an imaging system enables applications such as indoor positioning and tracking, health monitoring and hand gesture recognition.
520 $a Microwave imaging techniques based on beamforming cannot be used for indoor imaging, as most objects lie within the array near-field. Therefore, the range-migration algorithm (RMA) is used instead, as it compensates for the curvature of the reflected wavefronts, hence enabling near-field imaging. It is also based on fast-Fourier transforms and is therefore computationally efficient. A number of novel RMA variants were developed to support a wider variety of antenna array configurations, as well as to generate 3-D velocity maps of objects moving around a room.
520 $a The choice of antenna array configuration, microwave transceiver components and transmit power has a significant effect on both the energy consumed by the imaging system and the quality of the resulting images. A generic microwave imaging testbed was therefore built to characterize the effect of these antenna array parameters on image quality in the 20 GHz band. All variants of the RMA were compared and found to produce good quality three-dimensional images with transmit power levels as low as 1 muW. With an array size of 80x80 antennas, most of the imaging algorithms were able to image objects at 0.5 m range with 12.5 mm resolution, although some were only able to achieve 20 mm resolution. Increasing the size of the antenna array further results in a proportional improvement in image resolution and image SNR, until the resolution reaches the half-wavelength limit.
520 $a While microwave imaging is not a new technology, it has seen little commercial success due to the cost and power consumption of the large number of antennas and radio transceivers required to build such a system. The cost and power consumption can be reduced by using low-power and low-cost components in both the transmit and receive RF chains, even if these components have poor noise figures. Alternatively, the cost and power consumption can be reduced by decreasing the number of antennas in the array, while keeping the aperture constant. This reduction in antenna count is achieved by randomly depopulating the array, resulting in a sparse antenna array. A novel compressive sensing algorithm, coupled with the wavelet transform, is used to process the samples collected by the sparse array and form a 3-D image of the scene. This algorithm works well for antenna arrays that are up to 96% sparse, equating to a 25 times reduction in the number of required antennas.
520 $a For microwave imaging to be useful, it needs to capture images of the scene in real time. The architecture of a system capable of capturing real-time 3-D microwave images is therefore designed. The system consists of a modular antenna array, constructed by plugging RF daughtercards into a carrier board. Each daughtercard is a self-contained radio system, containing an antenna, RF transceiver baseband signal chain, and analog-to-digital converters. A small number of daughtercards have been built, and proven to be suitable for real-time microwave imaging. By arranging these daughtercards in different ways, any antenna array pattern can be built. This architecture allows real-time microwave imaging systems to be rapidly prototyped, while still being able to generate images at video frame rates.
590 $a School code: 0028.
650 4 $a Electrical engineering. $3 649834
650 4 $a Remote sensing. $3 535394
690 $a 0544
690 $a 0799
710 2 $a University of California, Berkeley. $b Electrical Engineering and Computer Sciences. $3 2096274
773 0 $t Dissertation Abstracts International $g 79-07B(E).
790 $a 0028
791 $a Ph.D.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10620750