Advances in acoustic emission techno...
World Conference on Acoustic Emission ((2017 :)

FindBook      Google Book      Amazon      博客來     
  • Advances in acoustic emission technology = proceedings of the World Conference on Acoustic Emission-2017 /
  • 紀錄類型: 書目-電子資源 : Monograph/item
    正題名/作者: Advances in acoustic emission technology/ edited by Gongtian Shen, Junjiao Zhang, Zhanwen Wu.
    其他題名: proceedings of the World Conference on Acoustic Emission-2017 /
    其他作者: Shen, Gongtian.
    團體作者: World Conference on Acoustic Emission
    出版者: Cham :Springer International Publishing : : 2019.,
    面頁冊數: xiv, 451 p. :ill., digital ;24 cm.
    內容註: Part1: Instrumentation -- Chapter1. Discussion on elastic wave sources for AE sensor calibration at low frequency -- Chapter2. Proposal for an absolute AE sensor calibration setup -- Chapter3. Difference between FBG and PZT Acoustic Emission Sensor -- Chapter4. Research on fiber bragg grating acoustic emission sensor -- Chapter5. The optimization of magneto acoustic emission testing device -- Chapter6. Power over Ethernet Daisy Chained Acoustic Emission System for Structure Health Monitoring -- Chapter7. Uniscope - instrument integrating NDT methods -- Chapter8. Fiber bragg grating acoustic emission demodulation system -- Part2: Signal Processing and Analysis -- Chapter9. Application of modal acoustic emission technique for recognition of corrosion severity on a thin plate -- Chapter10. Research on the identification of crack status through axle acoustic emission signal based on LMD and grey correlation analysis -- Chapter11. Acoustic emission characteristics based on energy mode of IMFs -- Chapter12. Two-Dimensional Source Location of Acoustic Emission by Means of AI -- Part3: Material Characteristics -- Chapter13. Acoustic emission RA-value and granite fracture modes under dynamic and static loads -- Chapter14. Damage detection in glass fiber reinforced plastics using ultrasonic full-waveform comparison -- Chapter15. Fatigue damage evaluation of 2.25Cr-1Mo-0.25V steel using acoustic emission entropy -- Chapter16. Acoustic emission behavior of TC4 Titanium alloy manufactured by electron beam freeform fabrication during tensile deformation -- Chapter17. An entropy approach for characterization and assessment of fatigue damage accumulation in Q235 steel based on acoustic emission testing -- Chapter18. Tensile deformation damage and clustering analysis of acoustic emission signals for 3D woven composites -- Chapter19. The study of Mechanical Behavior of Alloy Structural Steel Based on Dynamic Acoustic Emission Signal -- Chapter20. Acoustic emission characteristic of ceramic matrix composite under static loading.
    Contained By: Springer eBooks
    標題: Acoustic emission - Congresses. -
    電子資源: https://doi.org/10.1007/978-3-030-12111-2
    ISBN: 9783030121112
館藏地:  出版年:  卷號: 
館藏
  • 1 筆 • 頁數 1 •
  • 1 筆 • 頁數 1 •
多媒體
評論
Export
取書館
 
 
變更密碼
登入