東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Quality inspection and reliability s...

Yang, Jin.

FindBook

Google Book

Amazon

博客來

Quality inspection and reliability study of solder bumps in packaged electronic devices: Using laser ultrasound and finite element methods.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Quality inspection and reliability study of solder bumps in packaged electronic devices: Using laser ultrasound and finite element methods./
作者:	Yang, Jin.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2008,
面頁冊數:	296 p.
附註:	Source: Dissertation Abstracts International, Volume: 70-02, Section: B, page: 1310.
Contained By:	Dissertation Abstracts International70-02B.
標題:	Mechanical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3346108
ISBN:	9781109012620

Quality inspection and reliability study of solder bumps in packaged electronic devices: Using laser ultrasound and finite element methods.
Yang, Jin.

Quality inspection and reliability study of solder bumps in packaged electronic devices: Using laser ultrasound and finite element methods. - Ann Arbor : ProQuest Dissertations & Theses, 2008 - 296 p.

Source: Dissertation Abstracts International, Volume: 70-02, Section: B, page: 1310.

Thesis (Ph.D.)--Georgia Institute of Technology, 2008.

Consumer demands are driving the current trend in the microelectronics industry to make electronic products that are miniature, fast, compact, high-density, reliable and low-cost. The use of surface mount devices has helped to decrease the size of electronic packages through the use of solder bump interconnections between the devices and the substrates/printed wiring boards (PWBs). Solder bumps act as not only mechanical, but also electrical interconnections between the device and the substrate/PWB. Common manufacturing defects---such as open, cracked, missing, and misaligned solder bumps---are difficult to detect because solder bumps are hidden between the device and the substrate/PWB after assembly. The reliability of packaged electronic devices in storage and usage is a major concern in the microelectronics industry. Therefore, quality inspection of solder bumps has become a critical process in the microelectronics industry to ensure product quality and reliability. The laser ultrasound-interferometric inspection system under development aims to provide a solution that can overcome some of the limitations of current inspection techniques. The fully developed system will be automated and capable of inspecting a broad range of solder bump defects in a variety of electronic packages.

ISBN: 9781109012620Subjects--Topical Terms:

649730
Mechanical engineering.

Quality inspection and reliability study of solder bumps in packaged electronic devices: Using laser ultrasound and finite element methods.
LDR:03832nmm a2200301 4500 001 2161477
005 20180907134545.5
008 190424s2008 ||||||||||||||||| ||eng d
020 $a 9781109012620
035 $a (MiAaPQ)AAI3346108
035 $a AAI3346108
040 $a MiAaPQ $c MiAaPQ
100 1 $a Yang, Jin. $3 1926822
245 1 0 $a Quality inspection and reliability study of solder bumps in packaged electronic devices: Using laser ultrasound and finite element methods.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2008
300 $a 296 p.
500 $a Source: Dissertation Abstracts International, Volume: 70-02, Section: B, page: 1310.
500 $a Adviser: I. Charles Ume.
502 $a Thesis (Ph.D.)--Georgia Institute of Technology, 2008.
520 $a Consumer demands are driving the current trend in the microelectronics industry to make electronic products that are miniature, fast, compact, high-density, reliable and low-cost. The use of surface mount devices has helped to decrease the size of electronic packages through the use of solder bump interconnections between the devices and the substrates/printed wiring boards (PWBs). Solder bumps act as not only mechanical, but also electrical interconnections between the device and the substrate/PWB. Common manufacturing defects---such as open, cracked, missing, and misaligned solder bumps---are difficult to detect because solder bumps are hidden between the device and the substrate/PWB after assembly. The reliability of packaged electronic devices in storage and usage is a major concern in the microelectronics industry. Therefore, quality inspection of solder bumps has become a critical process in the microelectronics industry to ensure product quality and reliability. The laser ultrasound-interferometric inspection system under development aims to provide a solution that can overcome some of the limitations of current inspection techniques. The fully developed system will be automated and capable of inspecting a broad range of solder bump defects in a variety of electronic packages.
520 $a A methodology for quality evaluation and reliability study of solder bumps in electronic packages has been proposed and developed using the non-destructive and non-contact laser ultrasound-interferometric technique, finite element and statistical methods in this research work. This methodology includes the following aspects: (1) inspection pattern---specific inspection patterns are created according to inspection purpose and package formats, (2) laser pulse energy density calibration---specific laser pulse power and excitation laser spot size are selected in terms of package formats, (3) processing and analysis methods, including integrated analytical, finite element and experimental modal analyses approach, advanced signal processing methods and statistical analysis method, (4) approach combining modal analysis and advanced signal processing to improve measurement sensitivity of laser ultrasound-interferometric inspection technique, and (5) calibration curve using energy based simulation method and laser ultrasound inspection technique to predict thermomechanical reliability of solder bumps in electronic packages.
520 $a Because of the successful completion of the research objectives, the system has been used to evaluate a broad range of solder bump defects in a variety of packaged electronic devices. The development of this system will help tremendously to improve the quality and reliability of electronic packages, and this will save microelectronic and electronic packaging industry millions of dollars per year.
590 $a School code: 0078.
650 4 $a Mechanical engineering. $3 649730
690 $a 0548
710 2 $a Georgia Institute of Technology. $3 696730
773 0 $t Dissertation Abstracts International $g 70-02B.
790 $a 0078
791 $a Ph.D.
792 $a 2008
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3346108