東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Development of a Finite Element Pelv...

Shen, Ming.

FindBook

Google Book

Amazon

博客來

Development of a Finite Element Pelvis and Lower Extremity Model with Growth Plates for Pediatric Pedestrian Protection.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Development of a Finite Element Pelvis and Lower Extremity Model with Growth Plates for Pediatric Pedestrian Protection./
作者:	Shen, Ming.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
面頁冊數:	190 p.
附註:	Source: Dissertation Abstracts International, Volume: 79-01(E), Section: B.
Contained By:	Dissertation Abstracts International79-01B(E).
標題:	Biomedical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10603467
ISBN:	9780355220872

Development of a Finite Element Pelvis and Lower Extremity Model with Growth Plates for Pediatric Pedestrian Protection.
Shen, Ming.

Development of a Finite Element Pelvis and Lower Extremity Model with Growth Plates for Pediatric Pedestrian Protection. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 190 p.

Source: Dissertation Abstracts International, Volume: 79-01(E), Section: B.

Thesis (Ph.D.)--Wayne State University, 2017.

Finite element (FE) model is a useful tool frequently used for investigating the injury mechanisms and designing protection countermeasures. At present, no 10 years old (YO) pedestrian FE model has been developed from appropriate anthropometries and validated against limitedly available impact response data. A 10 YO child FE pelvis and lower extremities (PLEX) model was established to fill the gap of lacking such models in this age group. The baseline model was validated against available pediatric postmortem human subjects (PMHS) test data and additional scaled adult data, then the PLEX model was integrated to build a whole-body FE model representing a 10 YO pedestrian.

ISBN: 9780355220872Subjects--Topical Terms:

535387
Biomedical engineering.

Development of a Finite Element Pelvis and Lower Extremity Model with Growth Plates for Pediatric Pedestrian Protection.
LDR:03807nmm a2200337 4500 001 2160804
005 20180727125213.5
008 190424s2017 ||||||||||||||||| ||eng d
020 $a 9780355220872
035 $a (MiAaPQ)AAI10603467
035 $a (MiAaPQ)wayne:13376
035 $a AAI10603467
040 $a MiAaPQ $c MiAaPQ
100 1 $a Shen, Ming. $3 3348739
245 1 0 $a Development of a Finite Element Pelvis and Lower Extremity Model with Growth Plates for Pediatric Pedestrian Protection.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 190 p.
500 $a Source: Dissertation Abstracts International, Volume: 79-01(E), Section: B.
500 $a Adviser: King H. Yang.
502 $a Thesis (Ph.D.)--Wayne State University, 2017.
520 $a Finite element (FE) model is a useful tool frequently used for investigating the injury mechanisms and designing protection countermeasures. At present, no 10 years old (YO) pedestrian FE model has been developed from appropriate anthropometries and validated against limitedly available impact response data. A 10 YO child FE pelvis and lower extremities (PLEX) model was established to fill the gap of lacking such models in this age group. The baseline model was validated against available pediatric postmortem human subjects (PMHS) test data and additional scaled adult data, then the PLEX model was integrated to build a whole-body FE model representing a 10 YO pedestrian.
520 $a Additional investigations revealed that the immature tissues, growth plates (GPs), should be explicitly modeled because they have different mechanical properties than the surrounding bones. Epidemiological data revealed that GP accounted for a large portion of pediatric fractures. To investigate the GP's material property for further advancement of the baseline PLEX FE model for simulating impact mechanical responses, a series of tensile and shearing experiments on porcine bone-GP-bone units were carried out. The GPs from the femoral head, distal femur, and proximal tibia of 20-weeks-old piglets were tested, under different strain rates. Randomized block ANOVA was conducted to determine the effects of anatomic region and strain rate on the material properties of GPs. By comparing the porcine experimental data to the limited data obtained from tests on human subjects reported in the literature, an optimal conversion factor was derived to correlate the material properties of 20-week-old piglet GPs and 10 YO child GPs.
520 $a A transversely isotropic hyperelastic material model (MAT_92 available in LS-DYNA) with added viscosity was adopted to mimic the GP tissues. After a series of optimization procedures, the material parameter sets needed for MAT_92 were determined to represent the GPs of a 10 YO child. To further explore the GP modeling techniques, a sub-model representing the proximal femur was extracted from the PLEX model. The femoral head GP in the sub-model was modeled using the geometry from CT scans and the material properties from early optimizations. FE simulations of femoral head shearing were conducted on the sub-model to determine other GP modeling settings. In the following technical application, similar GP modeling techniques were implemented to model the GPs at the hip and knee regions to update the baseline PLEX model, and further the whole-body model. An SUV-to-pedestrian impact scenario was simulated using the updated whole-body model, the remarkable influences of the GPs on the stress distributions in the PLEX were quantitatively assessed.
590 $a School code: 0254.
650 4 $a Biomedical engineering. $3 535387
650 4 $a Biomechanics. $3 548685
650 4 $a Automotive engineering. $3 2181195
690 $a 0541
690 $a 0648
690 $a 0540
710 2 $a Wayne State University. $b Biomedical Engineering. $3 1057465
773 0 $t Dissertation Abstracts International $g 79-01B(E).
790 $a 0254
791 $a Ph.D.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10603467