東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Integrated energy system for a high ...

Jaczko, Kristen.

FindBook

Google Book

Amazon

博客來

Integrated energy system for a high performance building.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Integrated energy system for a high performance building./
作者:	Jaczko, Kristen.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
面頁冊數:	299 p.
附註:	Source: Dissertation Abstracts International, Volume: 75-06C.
Contained By:	Dissertation Abstracts International75-06C.
標題:	Civil engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10706601

Integrated energy system for a high performance building.
Jaczko, Kristen.

Integrated energy system for a high performance building. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 299 p.

Source: Dissertation Abstracts International, Volume: 75-06C.

Thesis (M.A.Sc.)--Queen's University (Canada), 2017.

Integrated energy systems have the potential to reduce of the energy consumption of residential buildings in Canada. These systems incorporate components to meet the building heating, cooling and domestic hot water load into a single system in order to reduce energy losses. An integrated energy system, consisting of a variable speed heat pump, cold and hot thermal storage tanks, a photovoltaic/thermal (PV/T) collector array and a battery bank, was designed for the Queen's Solar Design Team's (QSDT) test house. The system uses a radiant floor to provide space- heating and sensible cooling and a dedicated outdoor air system provides ventilation and dehumidifies the incoming fresh air. The test house, the Queen's Solar Education Centre (QSEC), and the integrated energy system were both modelled in TRNSYS. Additionally, a new TRNSYS Type was developed to model the PV/T collectors, enabling the modeling of the collection of energy from the ambient air. A parametric study was carried out in TRNSYS to investigate the effect of various parameters on the overall energy performance of the system. These parameters included the PV/T array size and the slope of the collectors, the heat pump source and load-side inlet temperature setpoints, the compressor speed control and the size of the thermal storage tanks and the battery bank. The controls of the heat pump were found to have a large impact on the performance of the integrated energy system. For example, a low evaporator setpoint improved the overall free energy ratio (FER) of the system but the heat pump performance was lowered. Reducing the heat loss of the PV/T panels was not found to have a large effect on the system performance however, as the heat pump is able to lower the inlet collector fluid temperature, thus reducing thermal losses. From the results of the sensitivity study, a recommended system model was created and this system had a predicted FER of 77.9% in Kingston, Ontario, neglecting the energy consumption of circulation pumps and fans. Simulations of the recommended integrated energy system were also performed in several other Canadian cities and the predicted FER was above 60% in all except for the most northern city investigated, Yellowknife. Thus, the integrated energy system has the potential of reducing the energy consumption of residential buildings in Canada.Subjects--Topical Terms:

860360
Civil engineering.

Integrated energy system for a high performance building.
LDR:03283nmm a2200301 4500 001 2156256
005 20180517123958.5
008 190424s2017 ||||||||||||||||| ||eng d
035 $a (MiAaPQ)AAI10706601
035 $a (MiAaPQ)QueensUCan197422824
035 $a AAI10706601
040 $a MiAaPQ $c MiAaPQ
100 1 $a Jaczko, Kristen. $3 3344026
245 1 0 $a Integrated energy system for a high performance building.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 299 p.
500 $a Source: Dissertation Abstracts International, Volume: 75-06C.
500 $a Adviser: Stephen Harrison.
502 $a Thesis (M.A.Sc.)--Queen's University (Canada), 2017.
520 $a Integrated energy systems have the potential to reduce of the energy consumption of residential buildings in Canada. These systems incorporate components to meet the building heating, cooling and domestic hot water load into a single system in order to reduce energy losses. An integrated energy system, consisting of a variable speed heat pump, cold and hot thermal storage tanks, a photovoltaic/thermal (PV/T) collector array and a battery bank, was designed for the Queen's Solar Design Team's (QSDT) test house. The system uses a radiant floor to provide space- heating and sensible cooling and a dedicated outdoor air system provides ventilation and dehumidifies the incoming fresh air. The test house, the Queen's Solar Education Centre (QSEC), and the integrated energy system were both modelled in TRNSYS. Additionally, a new TRNSYS Type was developed to model the PV/T collectors, enabling the modeling of the collection of energy from the ambient air. A parametric study was carried out in TRNSYS to investigate the effect of various parameters on the overall energy performance of the system. These parameters included the PV/T array size and the slope of the collectors, the heat pump source and load-side inlet temperature setpoints, the compressor speed control and the size of the thermal storage tanks and the battery bank. The controls of the heat pump were found to have a large impact on the performance of the integrated energy system. For example, a low evaporator setpoint improved the overall free energy ratio (FER) of the system but the heat pump performance was lowered. Reducing the heat loss of the PV/T panels was not found to have a large effect on the system performance however, as the heat pump is able to lower the inlet collector fluid temperature, thus reducing thermal losses. From the results of the sensitivity study, a recommended system model was created and this system had a predicted FER of 77.9% in Kingston, Ontario, neglecting the energy consumption of circulation pumps and fans. Simulations of the recommended integrated energy system were also performed in several other Canadian cities and the predicted FER was above 60% in all except for the most northern city investigated, Yellowknife. Thus, the integrated energy system has the potential of reducing the energy consumption of residential buildings in Canada.
590 $a School code: 0283.
650 4 $a Civil engineering. $3 860360
650 4 $a Architectural engineering. $3 3174102
650 4 $a Energy. $3 876794
690 $a 0543
690 $a 0462
690 $a 0791
710 2 $a Queen's University (Canada). $3 1017786
773 0 $t Dissertation Abstracts International $g 75-06C.
790 $a 0283
791 $a M.A.Sc.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10706601