東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Where Does the Oxygen Go? - Pathways...

Mazur, Ross David.

Linked to FindBook

Google Book

Amazon

博客來

Where Does the Oxygen Go? - Pathways and Partitioning in Autothermal Pyrolysis.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Where Does the Oxygen Go? - Pathways and Partitioning in Autothermal Pyrolysis./
Author:	Mazur, Ross David.
Published:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
Description:	125 p.
Notes:	Source: Masters Abstracts International, Volume: 56-05.
Contained By:	Masters Abstracts International56-05(E).
Subject:	Mechanical engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10262592
ISBN:	9781369879056

Where Does the Oxygen Go? - Pathways and Partitioning in Autothermal Pyrolysis.
Mazur, Ross David.

Where Does the Oxygen Go? - Pathways and Partitioning in Autothermal Pyrolysis. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 125 p.

Source: Masters Abstracts International, Volume: 56-05.

Thesis (M.S.)--Iowa State University, 2017.

Autothermal fast pyrolysis (AFP), a variation of fast pyrolysis (FP) admitting a small amount of oxygen to provide process heat, has notable merit as a biomass-to-biofuels conversion process. As a result of heat transfer and product collection advantages over standard non-oxidative FP, it has the potential to generate a higher quality product in a more economically competitive manner. Initial investigation and process development efforts, first led by Kwang Ho Kim, and Joseph Polin, respectively, at the Bioeconomy Institute, generated many further questions about the process. One notable question was "where does the energy come from to support autothermal pyrolysis"---to which the obvious answer is exothermic reactions, but beyond that is not well understood. This work explored the chemistry underlying autothermal (partial oxidative) pyrolysis, as distinguished from standard non-oxidative pyrolysis of whole biomass. A critical literature review was carried out to develop a theoretical mechanistic framework which was then applied to a process base case, and experimentally tested.

ISBN: 9781369879056Subjects--Topical Terms:

649730
Mechanical engineering.

Where Does the Oxygen Go? - Pathways and Partitioning in Autothermal Pyrolysis.
LDR:04838nmm a2200361 4500 001 2154755
005 20180419121556.5
008 190424s2017 ||||||||||||||||| ||eng d
020 $a 9781369879056
035 $a (MiAaPQ)AAI10262592
035 $a (MiAaPQ)iastate:16314
035 $a AAI10262592
040 $a MiAaPQ $c MiAaPQ
100 1 $a Mazur, Ross David. $3 3342484
245 1 0 $a Where Does the Oxygen Go? - Pathways and Partitioning in Autothermal Pyrolysis.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 125 p.
500 $a Source: Masters Abstracts International, Volume: 56-05.
500 $a Adviser: Robert C. Brown.
502 $a Thesis (M.S.)--Iowa State University, 2017.
520 $a Autothermal fast pyrolysis (AFP), a variation of fast pyrolysis (FP) admitting a small amount of oxygen to provide process heat, has notable merit as a biomass-to-biofuels conversion process. As a result of heat transfer and product collection advantages over standard non-oxidative FP, it has the potential to generate a higher quality product in a more economically competitive manner. Initial investigation and process development efforts, first led by Kwang Ho Kim, and Joseph Polin, respectively, at the Bioeconomy Institute, generated many further questions about the process. One notable question was "where does the energy come from to support autothermal pyrolysis"---to which the obvious answer is exothermic reactions, but beyond that is not well understood. This work explored the chemistry underlying autothermal (partial oxidative) pyrolysis, as distinguished from standard non-oxidative pyrolysis of whole biomass. A critical literature review was carried out to develop a theoretical mechanistic framework which was then applied to a process base case, and experimentally tested.
520 $a Key findings of the literature review included reaction mechanisms for the oxidation of: lignin interunit linkages, lignin monomers (and their functionalities), cellulose dimers and monomers, and hemicellulose units and functionalities. As discussed in the cellulose oxidation section, oxidation could occur by means of assisting glycosidic bond hydrolysis (either at a chain end ( unzipping) or mid-chain (cracking)), effectively increasing levoglucosan yield, or by oxidation of ring functionalities. If cellulose's substituents were to measurably react with Reactive Oxygen Species (ROS), the C6 primary alcohol would be the likely candidate, oxidizing to a C6 aldehyde or carboxylic acid, yet theoretically possible for ring-hydroxyls to oxidize.
520 $a Similarly to celluloses, hemicellulose might be oxidized by four means; polymer-end-wise chain scission initiation (primary peeling), mid-chain scission, end-chain unit degradation (secondary peeling ), or side-chain oxidation. Because of its branched and heterogeneous nature, and tendencies for decomposition of monomeric units following complete depolymerization during non-oxidative pyrolysis, fewer hemicellulose hexoses and pentoses would likely be recovered during oxidative pyrolysis.
520 $a Lignin, also structurally diverse, has many possible routes for oxidation. From linkage studies, it is apparent that oxidation of the beta- or gamma-hydroxyl (in the case of a beta-O-4' linkage), or the alpha-hydroxyl (for alpha- O-4' linkages) greatly weakens ether linkages, making susceptible to cleavage. Lignin's phenolic substituents are prone to oxidation to aldehydes, carboxylic acids and ketones. Those side chains with reactive double bonds could be oxidatively cleaved or encourage a concerted decomposition reaction. Because products of oxidation can be further oxidized themselves, care must be taken in extrapolating out composition trends to scaled-operation. Even considering these routes which would effect a change in product composition, the most significant effects might come simply due to improved reaction conditions (heat transfer, heating rate, and ventilation (due to greater gas production)).
520 $a Experimental work identified reactor limitations, and explored partial oxidation of a number of model compounds, representative of cellulose, hemicellulose, as well as lignin monomers and linkages. It is important to note that the findings of the micropyrolyzer studies are not directly applicable to continuous reactor chemistry due to the fundamentally different hydrodynamics and heat transfer. Additionally, biopolymer characteristics and interaction effects are not accounted for in the monomer and dimer model compound studies, as would be seen with whole biomass.
590 $a School code: 0097.
650 4 $a Mechanical engineering. $3 649730
650 4 $a Wood sciences. $3 3168288
650 4 $a Chemical engineering. $3 560457
690 $a 0548
690 $a 0746
690 $a 0542
710 2 $a Iowa State University. $b Mechanical Engineering. $3 1023689
773 0 $t Masters Abstracts International $g 56-05(E).
790 $a 0097
791 $a M.S.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10262592