東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Deformation Behavior of Al/a-Si Core...

Fleming, Robert.

FindBook

Google Book

Amazon

博客來

Deformation Behavior of Al/a-Si Core-shell Nanostructures.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Deformation Behavior of Al/a-Si Core-shell Nanostructures./
作者:	Fleming, Robert.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
面頁冊數:	159 p.
附註:	Source: Dissertation Abstracts International, Volume: 79-01(E), Section: B.
Contained By:	Dissertation Abstracts International79-01B(E).
標題:	Mechanical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10616915
ISBN:	9780355159585

Deformation Behavior of Al/a-Si Core-shell Nanostructures.
Fleming, Robert.

Deformation Behavior of Al/a-Si Core-shell Nanostructures. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 159 p.

Source: Dissertation Abstracts International, Volume: 79-01(E), Section: B.

Thesis (Ph.D.)--University of Arkansas, 2017.

Al/a-Si core-shell nanostructures (CSNs), consisting of a hemispherical Al core surrounded by a hard shell of a-Si, have been shown to display unusual mechanical behavior in response to compression loading. Most notably, these nanostructures exhibit substantial deformation recovery, even when loaded much beyond the elastic limit. Nanoindentation measurements revealed a unique mechanical response characterized by discontinuous signatures in the load-displacement data. In conjunction with the indentation signatures, nearly complete deformation recovery is observed. This behavior is attributed to dislocation nucleation and annihilation events enabled by the 3-dimensional confinement of the Al core. As the core confinement is reduced, either through an increase in confined core volume or a change in the geometrical confinement, the indentation signatures and deformation resistance are significantly reduced.

ISBN: 9780355159585Subjects--Topical Terms:

649730
Mechanical engineering.

Deformation Behavior of Al/a-Si Core-shell Nanostructures.
LDR:03432nmm a2200349 4500 001 2154373
005 20180330125241.5
008 190424s2017 ||||||||||||||||| ||eng d
020 $a 9780355159585
035 $a (MiAaPQ)AAI10616915
035 $a (MiAaPQ)uark:12753
035 $a AAI10616915
040 $a MiAaPQ $c MiAaPQ
100 1 $a Fleming, Robert. $3 3342099
245 1 0 $a Deformation Behavior of Al/a-Si Core-shell Nanostructures.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 159 p.
500 $a Source: Dissertation Abstracts International, Volume: 79-01(E), Section: B.
500 $a Adviser: Min Zou.
502 $a Thesis (Ph.D.)--University of Arkansas, 2017.
520 $a Al/a-Si core-shell nanostructures (CSNs), consisting of a hemispherical Al core surrounded by a hard shell of a-Si, have been shown to display unusual mechanical behavior in response to compression loading. Most notably, these nanostructures exhibit substantial deformation recovery, even when loaded much beyond the elastic limit. Nanoindentation measurements revealed a unique mechanical response characterized by discontinuous signatures in the load-displacement data. In conjunction with the indentation signatures, nearly complete deformation recovery is observed. This behavior is attributed to dislocation nucleation and annihilation events enabled by the 3-dimensional confinement of the Al core. As the core confinement is reduced, either through an increase in confined core volume or a change in the geometrical confinement, the indentation signatures and deformation resistance are significantly reduced.
520 $a Complimentary molecular dynamics simulations show that a substantial amount of dislocation egression occurs in the core of CSNs during unloading as dislocations annihilate at the core/shell interface. Smaller core diameters correlate with the development of a larger back-stress within the core during unloading, which further correlates with improved dislocation annihilation after unloading. Furthermore, dislocations nucleated in the core of core-shell nanorods are not as effectively removed as compared to CSNs.
520 $a Nanostructure-textured surfaces (NSTSs) composed of Al/a-Si CSNs have improved tribological properties compared surfaces patterned with Al nanodots and a flat (100) Si surface. NSTSs have a coefficient of friction (COF) as low as 0.015, exhibit low adhesion with adhesion forces on the order of less than 1 microN, and are highly deformation resistant, with no apparent surface deformation after nanoscratch testing, even at contact forces up to 8000 microN. In comparison, (100) Si has substantially higher adhesion and COF (~10 microN and ~0.062, respectively), while the Al nanodots have both higher friction (COF ~0.044) and are deformed when subjected to contact loads as low as 250 microN.
520 $a This integrated experimental and computational study elucidates the mechanisms that contribute to the novel properties of Al/a-Si CSNs and characterizes the tribological properties of surface composed of these nanostructures, which provides a foundation for the rational design of novel technologies based on CSNs.
590 $a School code: 0011.
650 4 $a Mechanical engineering. $3 649730
650 4 $a Materials science. $3 543314
650 4 $a Nanoscience. $3 587832
690 $a 0548
690 $a 0794
690 $a 0565
710 2 $a University of Arkansas. $b Mechanical Engineering. $3 2094155
773 0 $t Dissertation Abstracts International $g 79-01B(E).
790 $a 0011
791 $a Ph.D.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10616915