東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Mechanics of additive and advanced m...

SEM Conference & Exposition on Experimental and Applied Mechanics ((2017 :)

FindBook

Google Book

Amazon

博客來

Mechanics of additive and advanced manufacturing. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 9

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Mechanics of additive and advanced manufacturing./ edited by Junlan Wang ... [et al.].
其他題名:	proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /
其他作者:	Wang, Junlan.
團體作者:	SEM Conference & Exposition on Experimental and Applied Mechanics
出版者:	Cham :Springer International Publishing : : 2018.,
面頁冊數:	viii, 107 p. :ill., digital ;24 cm.
內容註:	Chapter 1.Fracture Properties of Additively Manufactured Acrylonitrile-Butadiene-Styrene Materials -- Chapter 2.Complex Modulus Variation by Manipulation of Mechanical Test Method and Print Direction -- Chapter 3.Piezoelectric Inkjet Printing as a Method for the Selective Deposition of Energetic Material -- Chapter 4.A New Heat Transfer Simulation Model for Selective Laser Melting to Estimate the Geometry of Cross Section of Melt Pool -- Chapter 5.Heat Conduction and Geometry Topology Optimization of Support Structure in Laser-based Additive Manufacturing -- Chapter 6.Strain Energy Dissipation Mechanisms in Carbon Nanotube Composites Fabricated by Additive Manufacturing -- Chapter 7.Mechanical Properties of 3-D LENS and PBF Printed Stainless Steel 316L Prototypes -- Chapter 8.Effect of Heat Treatment on Friction Stir Welded Dissimilar Titanium Alloys -- Chapter 9.Effect of Porosity on Thermal Performance of Plastic Injection Molds Based on Experimental and Numerically Derived Material Properties -- Chapter 10.ODS Coating Development Using DED Additive Manufacturing for High Temperature Turbine Components -- Chapter 11.Processing and Characterization of Ti64/AZ31 Multilayered Structure by Roll Bonding -- Chapter 12.Vibration Characteristics of Unit Cell Structures fabricated by Multi-Material Additive Manufacturing -- Chapter 13.Defects, Process Parameters and Signatures for Online Monitoring and Control in Powder-based Additive Manufacturing -- Chapter 14.The Effect of the 3-D Printing Process on the Mechanical Properties of Materials -- Chapter 15.Tool Wear Mechanisms of Phyisical Vapor Deposition (PVD) TiAlN Coated Tools Under Vegetable Oil Based Lubrication.
Contained By:	Springer eBooks
標題:	Materials - Congresses. - Additives -
電子資源:	http://dx.doi.org/10.1007/978-3-319-62834-9
ISBN:	9783319628349

Mechanics of additive and advanced manufacturing. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 9
Mechanics of additive and advanced manufacturing.proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /Volume 9[electronic resource] :edited by Junlan Wang ... [et al.]. - Cham :Springer International Publishing :2018. - viii, 107 p. :ill., digital ;24 cm. - Conference proceedings of the Society for Experimental Mechanics series,2191-5644. - Conference proceedings of the Society for Experimental Mechanics series..

Chapter 1.Fracture Properties of Additively Manufactured Acrylonitrile-Butadiene-Styrene Materials -- Chapter 2.Complex Modulus Variation by Manipulation of Mechanical Test Method and Print Direction -- Chapter 3.Piezoelectric Inkjet Printing as a Method for the Selective Deposition of Energetic Material -- Chapter 4.A New Heat Transfer Simulation Model for Selective Laser Melting to Estimate the Geometry of Cross Section of Melt Pool -- Chapter 5.Heat Conduction and Geometry Topology Optimization of Support Structure in Laser-based Additive Manufacturing -- Chapter 6.Strain Energy Dissipation Mechanisms in Carbon Nanotube Composites Fabricated by Additive Manufacturing -- Chapter 7.Mechanical Properties of 3-D LENS and PBF Printed Stainless Steel 316L Prototypes -- Chapter 8.Effect of Heat Treatment on Friction Stir Welded Dissimilar Titanium Alloys -- Chapter 9.Effect of Porosity on Thermal Performance of Plastic Injection Molds Based on Experimental and Numerically Derived Material Properties -- Chapter 10.ODS Coating Development Using DED Additive Manufacturing for High Temperature Turbine Components -- Chapter 11.Processing and Characterization of Ti64/AZ31 Multilayered Structure by Roll Bonding -- Chapter 12.Vibration Characteristics of Unit Cell Structures fabricated by Multi-Material Additive Manufacturing -- Chapter 13.Defects, Process Parameters and Signatures for Online Monitoring and Control in Powder-based Additive Manufacturing -- Chapter 14.The Effect of the 3-D Printing Process on the Mechanical Properties of Materials -- Chapter 15.Tool Wear Mechanisms of Phyisical Vapor Deposition (PVD) TiAlN Coated Tools Under Vegetable Oil Based Lubrication.

Mechanics of Additive and Advanced Manufacturing, Volume 9 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the ninth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies, including: Design, Optimization Experiments Computations Materials for Advanced Manufacturing Processes (3D printing, micro- and nano-manufacturing, powder bed fusion, directed energy deposition, etc.) Mechanics Aspects of Advanced Manufacturing (e.g. mechanical properties, residual stress, deformation, failure, rate-dependent mechanical behavior, etc.)

ISBN: 9783319628349

Standard No.: 10.1007/978-3-319-62834-9doiSubjects--Topical Terms:

3297427
Materials
--Additives--Congresses.

LC Class. No.: TA403.6

Dewey Class. No.: 620.11

Mechanics of additive and advanced manufacturing. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 9
LDR:03523nmm a2200325 a 4500 001 2131644
003 DE-He213
005 20180620105855.0
006 m d
007 cr nn 008maaau
008 181005s2018 gw s 0 eng d
020 $a 9783319628349 $q (electronic bk.)
020 $a 9783319628332 $q (paper)
024 7 $a 10.1007/978-3-319-62834-9 $2 doi
035 $a 978-3-319-62834-9
040 $a GP $c GP
041 0 $a eng
050 4 $a TA403.6
072 7 $a TGXT $2 bicssc
072 7 $a TEC020000 $2 bisacsh
082 0 4 $a 620.11 $2 23
090 $a TA403.6 $b .S471 2017
111 2 $a SEM Conference & Exposition on Experimental and Applied Mechanics $d (2017 : $c Indianapolis, Ind.) $3 3297425
245 1 0 $a Mechanics of additive and advanced manufacturing. $n Volume 9 $h [electronic resource] : $b proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics / $c edited by Junlan Wang ... [et al.].
260 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2018.
300 $a viii, 107 p. : $b ill., digital ; $c 24 cm.
490 1 $a Conference proceedings of the Society for Experimental Mechanics series, $x 2191-5644
505 0 $a Chapter 1.Fracture Properties of Additively Manufactured Acrylonitrile-Butadiene-Styrene Materials -- Chapter 2.Complex Modulus Variation by Manipulation of Mechanical Test Method and Print Direction -- Chapter 3.Piezoelectric Inkjet Printing as a Method for the Selective Deposition of Energetic Material -- Chapter 4.A New Heat Transfer Simulation Model for Selective Laser Melting to Estimate the Geometry of Cross Section of Melt Pool -- Chapter 5.Heat Conduction and Geometry Topology Optimization of Support Structure in Laser-based Additive Manufacturing -- Chapter 6.Strain Energy Dissipation Mechanisms in Carbon Nanotube Composites Fabricated by Additive Manufacturing -- Chapter 7.Mechanical Properties of 3-D LENS and PBF Printed Stainless Steel 316L Prototypes -- Chapter 8.Effect of Heat Treatment on Friction Stir Welded Dissimilar Titanium Alloys -- Chapter 9.Effect of Porosity on Thermal Performance of Plastic Injection Molds Based on Experimental and Numerically Derived Material Properties -- Chapter 10.ODS Coating Development Using DED Additive Manufacturing for High Temperature Turbine Components -- Chapter 11.Processing and Characterization of Ti64/AZ31 Multilayered Structure by Roll Bonding -- Chapter 12.Vibration Characteristics of Unit Cell Structures fabricated by Multi-Material Additive Manufacturing -- Chapter 13.Defects, Process Parameters and Signatures for Online Monitoring and Control in Powder-based Additive Manufacturing -- Chapter 14.The Effect of the 3-D Printing Process on the Mechanical Properties of Materials -- Chapter 15.Tool Wear Mechanisms of Phyisical Vapor Deposition (PVD) TiAlN Coated Tools Under Vegetable Oil Based Lubrication.
520 $a Mechanics of Additive and Advanced Manufacturing, Volume 9 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the ninth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies, including: Design, Optimization Experiments Computations Materials for Advanced Manufacturing Processes (3D printing, micro- and nano-manufacturing, powder bed fusion, directed energy deposition, etc.) Mechanics Aspects of Advanced Manufacturing (e.g. mechanical properties, residual stress, deformation, failure, rate-dependent mechanical behavior, etc.)
650 0 $a Materials $x Additives $v Congresses. $3 3297427
650 0 $a Manufacturing processes $x Congresses. $3 707954
650 1 4 $a Engineering. $3 586835
650 2 4 $a Manufacturing, Machines, Tools. $3 891025
650 2 4 $a Continuum Mechanics and Mechanics of Materials. $3 890989
650 2 4 $a Characterization and Evaluation of Materials. $3 890988
700 1 $a Wang, Junlan. $3 3297426
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer eBooks
830 0 $a Conference proceedings of the Society for Experimental Mechanics series. $3 2054689
856 4 0 $u http://dx.doi.org/10.1007/978-3-319-62834-9
950 $a Engineering (Springer-11647)