東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

A new high-resolution electromagneti...

Feng, Wanjie.

FindBook

Google Book

Amazon

博客來

A new high-resolution electromagnetic method for subsurface imaging.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	A new high-resolution electromagnetic method for subsurface imaging./
作者:	Feng, Wanjie.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2016,
面頁冊數:	193 p.
附註:	Source: Dissertation Abstracts International, Volume: 77-10(E), Section: B.
Contained By:	Dissertation Abstracts International77-10B(E).
標題:	Geophysics. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10110468
ISBN:	9781339737133

A new high-resolution electromagnetic method for subsurface imaging.
Feng, Wanjie.

A new high-resolution electromagnetic method for subsurface imaging. - Ann Arbor : ProQuest Dissertations & Theses, 2016 - 193 p.

Source: Dissertation Abstracts International, Volume: 77-10(E), Section: B.

Thesis (Ph.D.)--The University of Arizona, 2016.

For most electromagnetic (EM) geophysical systems, the contamination of primary fields on secondary fields ultimately limits the capability of the controlled-source EM methods. Null coupling techniques were proposed to solve this problem. However, the small orientation errors in the null coupling systems greatly restrict the applications of these systems. Another problem encountered by most EM systems is the surface interference and geologic noise, which sometimes make the geophysical survey impossible to carry out. In order to solve these problems, the alternating target antenna coupling (ATAC) method was introduced, which greatly removed the influence of the primary field and reduced the surface interference. But this system has limitations on the maximum transmitter moment that can be used. The differential target antenna coupling (DTAC) method was proposed to allow much larger transmitter moments and at the same time maintain the advantages of the ATAC method.

ISBN: 9781339737133Subjects--Topical Terms:

535228
Geophysics.

A new high-resolution electromagnetic method for subsurface imaging.
LDR:04499nmm a2200301 4500 001 2122392
005 20170922124910.5
008 180830s2016 ||||||||||||||||| ||eng d
020 $a 9781339737133
035 $a (MiAaPQ)AAI10110468
035 $a AAI10110468
040 $a MiAaPQ $c MiAaPQ
100 1 $a Feng, Wanjie. $3 3284362
245 1 2 $a A new high-resolution electromagnetic method for subsurface imaging.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2016
300 $a 193 p.
500 $a Source: Dissertation Abstracts International, Volume: 77-10(E), Section: B.
500 $a Adviser: Ben K. Sternberg.
502 $a Thesis (Ph.D.)--The University of Arizona, 2016.
520 $a For most electromagnetic (EM) geophysical systems, the contamination of primary fields on secondary fields ultimately limits the capability of the controlled-source EM methods. Null coupling techniques were proposed to solve this problem. However, the small orientation errors in the null coupling systems greatly restrict the applications of these systems. Another problem encountered by most EM systems is the surface interference and geologic noise, which sometimes make the geophysical survey impossible to carry out. In order to solve these problems, the alternating target antenna coupling (ATAC) method was introduced, which greatly removed the influence of the primary field and reduced the surface interference. But this system has limitations on the maximum transmitter moment that can be used. The differential target antenna coupling (DTAC) method was proposed to allow much larger transmitter moments and at the same time maintain the advantages of the ATAC method.
520 $a In this dissertation, first, the theoretical DTAC calculations were derived mathematically using Born and Wolf's complex magnetic vector. 1D layered and 2D blocked earth models were used to demonstrate that the DTAC method has no responses for 1D and 2D structures. Analytical studies of the plate model influenced by conductive and resistive backgrounds were presented to explain the physical phenomenology behind the DTAC method, which is the magnetic fields of the subsurface targets are required to be frequency dependent. Then, the advantages of the DTAC method, e.g., high-resolution, reducing the geologic noise and insensitive to surface interference, were analyzed using surface and subsurface numerical examples in the EMGIMA software. Next, the theoretical advantages, such as high resolution and insensitive to surface interference, were verified by designing and developing a low-power (moment of 50 Am 2) vertical-array DTAC system and testing it on controlled targets and scaled target coils. At last, a high-power (moment of about 6800 Am2) vertical-array DTAC system was designed, developed and tested on controlled buried targets and surface interference to illustrate that the DTAC system was insensitive to surface interference even with a high-power transmitter and having higher resolution by using the large-moment transmitter.
520 $a From the theoretical and practical analysis and tests, several characteristics of the DTAC method were found: (1) The DTAC method can null out the effect of 1D layered and 2D structures, because magnetic fields are orientation independent which lead to no difference among the null vector directions. This characteristic allows for the measurements of smaller subsurface targets; (2) The DTAC method is insensitive to the orientation errors. It is a robust EM null coupling method. Even large orientation errors do not affect the measured target responses, when a reference frequency and one or more data frequencies are used; (3) The vertical-array DTAC method is effective in reducing the geologic noise and insensitive to the surface interference, e.g., fences, vehicles, power line and buildings; (4) The DTAC method is a high-resolution EM sounding method. It can distinguish the depth and orientation of subsurface targets; (5) The vertical-array DTAC method can be adapted to a variety of rapidly moving survey applications. The transmitter moment can be scaled for effective study of near-surface targets (civil engineering, water resource, and environmental restoration) as well as deep targets (mining and other natural-resource exploration).
590 $a School code: 0009.
650 4 $a Geophysics. $3 535228
690 $a 0373
710 2 $a The University of Arizona. $b Mining Geological & Geophysical Engineering. $3 1035676
773 0 $t Dissertation Abstracts International $g 77-10B(E).
790 $a 0009
791 $a Ph.D.
792 $a 2016
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10110468