東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Microencapsulated Phase Change Compo...

Thiele, Alexander.

FindBook

Google Book

Amazon

博客來

Microencapsulated Phase Change Composite Materials for Energy Efficient Buildings.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Microencapsulated Phase Change Composite Materials for Energy Efficient Buildings./
作者:	Thiele, Alexander.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2016,
面頁冊數:	237 p.
附註:	Source: Dissertation Abstracts International, Volume: 77-10(E), Section: B.
Contained By:	Dissertation Abstracts International77-10B(E).
標題:	Mechanical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10119568
ISBN:	9781339808024

Microencapsulated Phase Change Composite Materials for Energy Efficient Buildings.
Thiele, Alexander.

Microencapsulated Phase Change Composite Materials for Energy Efficient Buildings. - Ann Arbor : ProQuest Dissertations & Theses, 2016 - 237 p.

Source: Dissertation Abstracts International, Volume: 77-10(E), Section: B.

Thesis (Ph.D.)--University of California, Los Angeles, 2016.

This study aims to elucidate how phase change material (PCM)-composite materials can be leveraged to reduce the energy consumption of buildings and to provide cost savings to ratepayers. Phase change materials (PCMs) can store thermal energy in the form of latent heat when subjected to temperatures exceeding their melting point by undergoing a phase transition from solid to liquid state. Reversibly, PCMs can release this thermal energy when the system temperature falls below their solidification point. The goal in implementing composite PCM walls is to significantly reduce and time-shift the maximum thermal load on the building in order to reduce and smooth out the electricity demand for heating and cooling. This Ph.D. thesis aims to develop a set of thermal design methods and tools for exploring the use of PCM-composite building envelopes and for providing design rules for their practical implementation.

ISBN: 9781339808024Subjects--Topical Terms:

649730
Mechanical engineering.

Microencapsulated Phase Change Composite Materials for Energy Efficient Buildings.
LDR:04378nmm a2200349 4500 001 2120445
005 20170719065340.5
008 180830s2016 ||||||||||||||||| ||eng d
020 $a 9781339808024
035 $a (MiAaPQ)AAI10119568
035 $a AAI10119568
040 $a MiAaPQ $c MiAaPQ
100 1 $a Thiele, Alexander. $3 3282381
245 1 0 $a Microencapsulated Phase Change Composite Materials for Energy Efficient Buildings.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2016
300 $a 237 p.
500 $a Source: Dissertation Abstracts International, Volume: 77-10(E), Section: B.
500 $a Advisers: Laurent Pilon; Gaurav Sant.
502 $a Thesis (Ph.D.)--University of California, Los Angeles, 2016.
520 $a This study aims to elucidate how phase change material (PCM)-composite materials can be leveraged to reduce the energy consumption of buildings and to provide cost savings to ratepayers. Phase change materials (PCMs) can store thermal energy in the form of latent heat when subjected to temperatures exceeding their melting point by undergoing a phase transition from solid to liquid state. Reversibly, PCMs can release this thermal energy when the system temperature falls below their solidification point. The goal in implementing composite PCM walls is to significantly reduce and time-shift the maximum thermal load on the building in order to reduce and smooth out the electricity demand for heating and cooling. This Ph.D. thesis aims to develop a set of thermal design methods and tools for exploring the use of PCM-composite building envelopes and for providing design rules for their practical implementation.
520 $a First, detailed numerical simulations were used to show that the effective thermal conductivity of core-shell-matrix composites depended only on the volume fraction and thermal conductivity of the constituent materials. The effective medium approximation reported by Felske (2004) was in very good agreement with numerical predictions of the effective thermal conductivity. Second, a carefully validated transient thermal model was used to simulate microencapsulated PCM-composite walls subjected to diurnal or annual outdoor temperature and solar radiation flux. It was established that adding microencapsulated PCM to concrete walls both substantially reduced and delayed the thermal load on the building. Several design rules were established, most notably, (i) increasing the volume fraction of microencapsulated PCM within the wall increases the energy savings but at the potential expense of mechanical properties [1], (ii) the phase change temperature leading to the maximum energy and cost savings should equal the desired indoor temperature regardless of the climate conditions, (iii) microencapsulated PCM-concrete walls have the best energetic performance in climates where the outdoor temperature oscillates around the desired indoor temperature, (iv) microencapsulated PCM offers the largest energy and cost savings when embedded in South- and West-facing walls and during the summer months in San Francisco and Los Angeles, CA.
520 $a Third, a novel experimental method was developed to rapidly quantitatively characterize the thermal performance and potential energy savings of composite materials containing phase change materials (PCM) based on a figure of merit termed the energy indicator (EI). The method featured (i) commonly used specimen geometry, (ii) straightforward experimental implementation, and (iii) sensitivity to relevant design parameters including PCM volume fraction, enthalpy of phase change, composite effective thermal conductivity, and specimen dimensions.
520 $a Finally, the widely-used admittance method was extended to account for the effects of phase change on the thermal load passing through PCM-composite building walls subjected to realistic outdoor temperature and solar radiation flux. The speed and simplicity of the admittance method could facilitate the design and evaluation of the energy benefits of PCM-composite walls through user-friendly design software for a wide range of users.
590 $a School code: 0031.
650 4 $a Mechanical engineering. $3 649730
650 4 $a Energy. $3 876794
650 4 $a Materials science. $3 543314
650 4 $a Architectural engineering. $3 3174102
690 $a 0548
690 $a 0791
690 $a 0794
690 $a 0462
710 2 $a University of California, Los Angeles. $b Mechanical Engineering. $3 2093961
773 0 $t Dissertation Abstracts International $g 77-10B(E).
790 $a 0031
791 $a Ph.D.
792 $a 2016
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10119568