東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Electrochemical and thermal mechanis...

Seo, Jeongwook.

FindBook

Google Book

Amazon

博客來

Electrochemical and thermal mechanistic study of beyond lithium ion systems: Lithium sulfur and lithium oxygen cells.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Electrochemical and thermal mechanistic study of beyond lithium ion systems: Lithium sulfur and lithium oxygen cells./
作者:	Seo, Jeongwook.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2016,
面頁冊數:	144 p.
附註:	Source: Dissertation Abstracts International, Volume: 78-03(E), Section: B.
Contained By:	Dissertation Abstracts International78-03B(E).
標題:	Chemical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10174143
ISBN:	9781369286694

Electrochemical and thermal mechanistic study of beyond lithium ion systems: Lithium sulfur and lithium oxygen cells.
Seo, Jeongwook.

Electrochemical and thermal mechanistic study of beyond lithium ion systems: Lithium sulfur and lithium oxygen cells. - Ann Arbor : ProQuest Dissertations & Theses, 2016 - 144 p.

Source: Dissertation Abstracts International, Volume: 78-03(E), Section: B.

Thesis (Ph.D.)--Illinois Institute of Technology, 2016.

Electrochemical and Thermal Mechanistic Study of Lithium Sulfur Cell. The thermal behavior of Li/S cells was studied using IMC in terms of reversible and irreversible heat generation. The heat generation profile was compared with the voltage profile during discharge of the cell and it was found that the trend of heat generation rate shows excellent correlation with the evolution of reaction voltage, which demonstrates that the IMC technique can be used as an useful tool to study the elementary reactions of the Li/S cell. A simple heat generation model provides reasonable agreement with the measured trends in the heat release. The resistive heat evolution that is calculated by over voltage has the largest portion of total cell heat generation (85%) after the IMC heat evolution model analysis. The qualitative agreement between the aforementioned experimental results and heat generation model yields a comprehensive picture of the elementary reaction steps in Li/S cell.

ISBN: 9781369286694Subjects--Topical Terms:

560457
Chemical engineering.

Electrochemical and thermal mechanistic study of beyond lithium ion systems: Lithium sulfur and lithium oxygen cells.
LDR:05519nmm a2200337 4500 001 2119960
005 20170627090655.5
008 180830s2016 ||||||||||||||||| ||eng d
020 $a 9781369286694
035 $a (MiAaPQ)AAI10174143
035 $a AAI10174143
040 $a MiAaPQ $c MiAaPQ
100 1 $a Seo, Jeongwook. $3 3281860
245 1 0 $a Electrochemical and thermal mechanistic study of beyond lithium ion systems: Lithium sulfur and lithium oxygen cells.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2016
300 $a 144 p.
500 $a Source: Dissertation Abstracts International, Volume: 78-03(E), Section: B.
500 $a Adviser: Jai Prakash.
502 $a Thesis (Ph.D.)--Illinois Institute of Technology, 2016.
520 $a Electrochemical and Thermal Mechanistic Study of Lithium Sulfur Cell. The thermal behavior of Li/S cells was studied using IMC in terms of reversible and irreversible heat generation. The heat generation profile was compared with the voltage profile during discharge of the cell and it was found that the trend of heat generation rate shows excellent correlation with the evolution of reaction voltage, which demonstrates that the IMC technique can be used as an useful tool to study the elementary reactions of the Li/S cell. A simple heat generation model provides reasonable agreement with the measured trends in the heat release. The resistive heat evolution that is calculated by over voltage has the largest portion of total cell heat generation (85%) after the IMC heat evolution model analysis. The qualitative agreement between the aforementioned experimental results and heat generation model yields a comprehensive picture of the elementary reaction steps in Li/S cell.
520 $a The increase of cell conductivity can be expected to bring about low heat evolution during cell cycling by reducing resistive heat. Doped Sulfur as a conductive cathode is a good suggestion to improve cell heat behavior. Furthermore, better cell cycle capability is expected by using lithium metal oxide cathode composites. The thermal behavior of three cathode materials for lithium/sulfur (Li/S) cell, namely - sulfur, sulfur-LiFePO4 (S-LFP) composite and sulfur-LiV3O8 (S-LVO) composite were comparatively studied using Isothermal Micro-Calorimetry (IMC) at various rates of discharge current. A continuum model was used to calculate the reversible entropic heat and irreversible resistive heat generated over the discharge process and the model data was compared to the experimental data to elucidate these contributions to the overall heat generated. The S-LVO composite cathode was found to show the least heat generation during discharge. Further, Accelerating Rate Calorimetry (ARC) was used to study the thermal safety of these three cells. The cell with the S-LVO composite cathode was found to have the highest onset temperature for thermal runaway and also the lowest maximum self-heat rate. The combination of high capacity, long cycle life and thermal stability makes the S-LVO composite cathode a very promising material for Li/S cells.
520 $a Oxygen Reduction Reaction Studies using Rotating Ring Disk Electrode for Li-Air battery. The oxygen reduction reaction (ORR) studies in aqueous electrolytes have reported the following reaction mechanisms: (i) four electron reaction, (ii) two electron reaction and (iii) one electron chemical reaction. On the other hand, the aprotic ORR literature has no reports of four electrons and two electrons transfer reaction. The kinetics of ORR on the cathode was carried out using rotating ring disk electrode (RRDE) technique. The first step of ORR which produces the superoxide radical was investigated on glassy carbon (GC) disk in 0.1 M tetrabutylammonium bis-(trifluoromethane)imide (TBATFSI)/dimethoxyethane (DME). One-electron reduction to the superoxide radical was founded in the linear sweep voltammetry (LSV) analysis. Further, ORR to produce LiO2 and Li2O2 was carried in bis(trifluoromethane)sulfonimide-lithium(LITFSI)/DME on porous carbon coated glassy carbon electrode disk. The reaction kinetic rate on the porous carbon was calculated using the Li-O2 ORR mechanism model. The kinetic rate was compared with the kinetic rate of glassy carbon electrode.
520 $a The non-aqueous system has several advantages compared to the aqueous system such as high operation voltage and non-reactive electrolyte with Li+. However this system has some critical problems such as low solubility of Li 2O2 and High charge over potential. One attempted solution for these disadvantages of the non-aqueous system was to carry out water addition into the solvent which was expected to produce highly soluble LiOH with lower overpotential. Small amount of Water, 0.5 wt% added into 0.1 M LiTFSI/DME and 1 wt% added in the 0.2 M TBATFSI/DME electrolyte, showed great electrochemical performance with lower onset potential and overvoltage. The kinetics of ORR study for the non-aqueous and aqueous hybrid system was carried out using RRDE technique. Koutecky-Levich plot and Tafel slope analysis indicated two electron transfer reaction on the hydrated 0.1 M LiTFSI/DME. This hydrated system can be expected to double energy storage by two electron transfer ORR for Li-O2 Cell.
590 $a School code: 0091.
650 4 $a Chemical engineering. $3 560457
650 4 $a Physical chemistry. $3 1981412
650 4 $a Analytical chemistry. $3 3168300
690 $a 0542
690 $a 0494
690 $a 0486
710 2 $a Illinois Institute of Technology. $b Chemical and Biological Engineering. $3 2102429
773 0 $t Dissertation Abstracts International $g 78-03B(E).
790 $a 0091
791 $a Ph.D.
792 $a 2016
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10174143