東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Nanoscale study of perovskite solar ...

Adhikari, Nirmal.

FindBook

Google Book

Amazon

博客來

Nanoscale study of perovskite solar cells for efficient charge transport.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Nanoscale study of perovskite solar cells for efficient charge transport./
作者:	Adhikari, Nirmal.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2016,
面頁冊數:	153 p.
附註:	Source: Dissertation Abstracts International, Volume: 78-03(E), Section: B.
Contained By:	Dissertation Abstracts International78-03B(E).
標題:	Electrical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10157526
ISBN:	9781369125528

Nanoscale study of perovskite solar cells for efficient charge transport.
Adhikari, Nirmal.

Nanoscale study of perovskite solar cells for efficient charge transport. - Ann Arbor : ProQuest Dissertations & Theses, 2016 - 153 p.

Source: Dissertation Abstracts International, Volume: 78-03(E), Section: B.

Thesis (Ph.D.)--South Dakota State University, 2016.

The effect of temperature, humidity and water on the grain boundary potential and charge transport within the grains of pervoskite films prepared by sequential deposition technique. Grain boundary potential of perovskite films exhibited variation in electrical properties with humidity level, temperature and water concentration in methyl ammonium iodide solution. X-ray diffraction (XRD) indicates the formation of PbI2 phase in perovskite film with increasing temperature, humidity and adding larger quantity of water in methyl ammonium iodide solution. It is found that optimum amount of lead iodide helps for the passivation of perovskite film. Spatial mapping of surface potential in the perovskite film exhibits higher positive potential at grain boundaries compared to the surface of the grains. Back recombination barrier between TiO2- perovskite increases to 378 meV for perovskite film annealed at 100 ºC for 15 min. Grain boundary potential barrier were found to increase from &sim;35 meV to 80 meV for perovskite film exposed to 75% RH level compared to perovskite film kept inside glove box. Optimum amount of water which increases the solar cell performance by increasing the crystallinity of perovskite film was found to be 5% by volume of IPA. Results show strong correlation between temperature, humidity level, electronic grain boundary properties and device performance of perovskite solar cells.

ISBN: 9781369125528Subjects--Topical Terms:

649834
Electrical engineering.

Nanoscale study of perovskite solar cells for efficient charge transport.
LDR:02330nmm a2200289 4500 001 2119089
005 20170619070730.5
008 180830s2016 ||||||||||||||||| ||eng d
020 $a 9781369125528
035 $a (MiAaPQ)AAI10157526
035 $a AAI10157526
040 $a MiAaPQ $c MiAaPQ
100 1 $a Adhikari, Nirmal. $3 3280943
245 1 0 $a Nanoscale study of perovskite solar cells for efficient charge transport.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2016
300 $a 153 p.
500 $a Source: Dissertation Abstracts International, Volume: 78-03(E), Section: B.
500 $a Adviser: Qiquan Qiao.
502 $a Thesis (Ph.D.)--South Dakota State University, 2016.
520 $a The effect of temperature, humidity and water on the grain boundary potential and charge transport within the grains of pervoskite films prepared by sequential deposition technique. Grain boundary potential of perovskite films exhibited variation in electrical properties with humidity level, temperature and water concentration in methyl ammonium iodide solution. X-ray diffraction (XRD) indicates the formation of PbI2 phase in perovskite film with increasing temperature, humidity and adding larger quantity of water in methyl ammonium iodide solution. It is found that optimum amount of lead iodide helps for the passivation of perovskite film. Spatial mapping of surface potential in the perovskite film exhibits higher positive potential at grain boundaries compared to the surface of the grains. Back recombination barrier between TiO2- perovskite increases to 378 meV for perovskite film annealed at 100 ºC for 15 min. Grain boundary potential barrier were found to increase from &sim;35 meV to 80 meV for perovskite film exposed to 75% RH level compared to perovskite film kept inside glove box. Optimum amount of water which increases the solar cell performance by increasing the crystallinity of perovskite film was found to be 5% by volume of IPA. Results show strong correlation between temperature, humidity level, electronic grain boundary properties and device performance of perovskite solar cells.
590 $a School code: 0205.
650 4 $a Electrical engineering. $3 649834
650 4 $a Nanoscience. $3 587832
690 $a 0544
690 $a 0565
710 2 $a South Dakota State University. $b Electrical Engineering and Computer Science. $3 3280944
773 0 $t Dissertation Abstracts International $g 78-03B(E).
790 $a 0205
791 $a Ph.D.
792 $a 2016
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10157526