東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Production of acetic acid in kraft p...

Patil, Ravikant Amogisidha.

FindBook

Google Book

Amazon

博客來

Production of acetic acid in kraft pulp mill biorefinery using bi-polar membrane electrodialysis.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Production of acetic acid in kraft pulp mill biorefinery using bi-polar membrane electrodialysis./
作者:	Patil, Ravikant Amogisidha.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2016,
面頁冊數:	191 p.
附註:	Source: Dissertation Abstracts International, Volume: 78-05(E), Section: B.
Contained By:	Dissertation Abstracts International78-05B(E).
標題:	Chemical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10300301
ISBN:	9781369423402

Production of acetic acid in kraft pulp mill biorefinery using bi-polar membrane electrodialysis.
Patil, Ravikant Amogisidha.

Production of acetic acid in kraft pulp mill biorefinery using bi-polar membrane electrodialysis. - Ann Arbor : ProQuest Dissertations & Theses, 2016 - 191 p.

Source: Dissertation Abstracts International, Volume: 78-05(E), Section: B.

Thesis (Ph.D.)--The University of Maine, 2016.

The objective of this dissertation was to develop a process for the production of acetic acid in kraft mills. Acetyl groups in hardwood can be hydrolyzed using alkali at 50 °C. The product from this process contains about 15 g/L of sodium acetate and was determined to be suitable for the production of acetic acid.

ISBN: 9781369423402Subjects--Topical Terms:

560457
Chemical engineering.

Production of acetic acid in kraft pulp mill biorefinery using bi-polar membrane electrodialysis.
LDR:03286nmm a2200361 4500 001 2116823
005 20170508081331.5
008 180830s2016 ||||||||||||||||| ||eng d
020 $a 9781369423402
035 $a (MiAaPQ)AAI10300301
035 $a AAI10300301
040 $a MiAaPQ $c MiAaPQ
100 1 $a Patil, Ravikant Amogisidha. $3 3278567
245 1 0 $a Production of acetic acid in kraft pulp mill biorefinery using bi-polar membrane electrodialysis.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2016
300 $a 191 p.
500 $a Source: Dissertation Abstracts International, Volume: 78-05(E), Section: B.
500 $a Adviser: Joseph M. Genco.
502 $a Thesis (Ph.D.)--The University of Maine, 2016.
520 $a The objective of this dissertation was to develop a process for the production of acetic acid in kraft mills. Acetyl groups in hardwood can be hydrolyzed using alkali at 50 °C. The product from this process contains about 15 g/L of sodium acetate and was determined to be suitable for the production of acetic acid.
520 $a Experiments performed using aqueous sodium acetate to evaluate the ability of electrodialysis (ED) to separate and concentrate sodium acetate showed that sodium acetate can be concentrated up to 275 g/L starting with an initial concentration of 17 g/L. The transport of water with sodium and acetate ions through ED membranes limited the maximum obtainable concentration.
520 $a To avoid the deleterious effects of white liquor on ED, selectivity experiments were performed using synthetic oxidized white liquor extract. These experiments showed a decrease in the efficiency of ED process due to the presence of sodium carbonate and sodium sulphate in the extract. Hence, it was concluded that caustic should be used as the extraction solvent.
520 $a Bi-polar electrodialysis (BPMED) experiments performed using sodium acetate showed that up to 200-280 g/L of acetic acid can be produced using BPMED. Although higher concentrations of sodium hydroxide can also be produced using BPMED, 30 g/L concentration was considered to be sufficient for recycle to the extraction process.
520 $a Feed and bleed mode BPMED experiments were performed to determine the current efficiencies and the suitable inlet concentration of sodium acetate for the production of up to 200 g/L of acetic acid. Both feed and bleed mode and batch experiments showed that the current density was the major driving force for BPMED.
520 $a Two types of concentrated wood extracts; namely (1) clarified and (2) unclarified were prepared with and without the lignin removal pre-treatment, respectively. The results of the ED and BPMED experiments performed using these extracts were similar to those of the synthetic sodium acetate. A major difference involved an increase of about 15% in electric energy consumption arising from the transport of formate, lactate and glycolate salts. The color of the anionic membranes slightly changed after processing unclarified extract through ED and BPMED.
590 $a School code: 0113.
650 4 $a Chemical engineering. $3 560457
650 4 $a Chemistry. $3 516420
650 4 $a Wood sciences. $3 3168288
690 $a 0542
690 $a 0485
690 $a 0746
710 2 $a The University of Maine. $3 1029373
773 0 $t Dissertation Abstracts International $g 78-05B(E).
790 $a 0113
791 $a Ph.D.
792 $a 2016
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10300301