東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Development of Material Characteriza...

Cinar, Eyup.

Linked to FindBook

Google Book

Amazon

博客來

Development of Material Characterization Techniques using Novel Nanoindendation Approaches on Hard and Soft Materials used in MEMS.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Development of Material Characterization Techniques using Novel Nanoindendation Approaches on Hard and Soft Materials used in MEMS./
Author:	Cinar, Eyup.
Description:	160 p.
Notes:	Source: Dissertation Abstracts International, Volume: 77-04(E), Section: B.
Contained By:	Dissertation Abstracts International77-04B(E).
Subject:	Nanotechnology. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3734775
ISBN:	9781339235103

Development of Material Characterization Techniques using Novel Nanoindendation Approaches on Hard and Soft Materials used in MEMS.
Cinar, Eyup.

Development of Material Characterization Techniques using Novel Nanoindendation Approaches on Hard and Soft Materials used in MEMS. - 160 p.

Source: Dissertation Abstracts International, Volume: 77-04(E), Section: B.

Thesis (Ph.D.)--Rochester Institute of Technology, 2015.

Investigating and modeling the mechanical properties of materials is important for many applications. The most common technique used for mechanical characterization of materials is called nanoindentation. The currently available tools utilized in order to perform nanoindentation have their limitations in terms of sensitivities in force and displacement for a broad range of material properties. When it comes to investigation of soft materials, these limitations might be more detrimental. In this dissertation work, novel nanoindentation techniques have been developed with a multi-probe scanning force microscopy (SPM) system in order to ease the major problems encountered with standard Atomic Force Microscopy (AFM) or nanoindentation systems. Tuning forks are used as probes during nanoindentation. By using the newly developed nanoindentation techniques for quasi-static nanoindentation experiments, the force information is extracted through the displacement of the indenter probe measured by a second probe with ultraresolution. For dynamic nanoindentation, frequency modulation techniques have been used to extract force information from a single indenter tuningfork probe. Thanks to the high quality of resonance (Q factor) of tuning fork probes, force measurements can be performed with an ultra high resolution. The accurate measurements of material properties on soft materials is used in characterization of microfabricated pillar sensors which can be used in measuring nN level of cell traction forces in a biomedical application. The techniques developed in this research also enable the system as an ultra-sensitive force sensor to apply nN scale lateral and vertical loads on microfabricated structures or biological specimens.

ISBN: 9781339235103Subjects--Topical Terms:

526235
Nanotechnology.

Development of Material Characterization Techniques using Novel Nanoindendation Approaches on Hard and Soft Materials used in MEMS.
LDR:02681nmm a2200277 4500 001 2070887
005 20160621141236.5
008 170521s2015 ||||||||||||||||| ||eng d
020 $a 9781339235103
035 $a (MiAaPQ)AAI3734775
035 $a AAI3734775
040 $a MiAaPQ $c MiAaPQ
100 1 $a Cinar, Eyup. $3 1672579
245 1 0 $a Development of Material Characterization Techniques using Novel Nanoindendation Approaches on Hard and Soft Materials used in MEMS.
300 $a 160 p.
500 $a Source: Dissertation Abstracts International, Volume: 77-04(E), Section: B.
500 $a Adviser: Ferat Sahin.
502 $a Thesis (Ph.D.)--Rochester Institute of Technology, 2015.
520 $a Investigating and modeling the mechanical properties of materials is important for many applications. The most common technique used for mechanical characterization of materials is called nanoindentation. The currently available tools utilized in order to perform nanoindentation have their limitations in terms of sensitivities in force and displacement for a broad range of material properties. When it comes to investigation of soft materials, these limitations might be more detrimental. In this dissertation work, novel nanoindentation techniques have been developed with a multi-probe scanning force microscopy (SPM) system in order to ease the major problems encountered with standard Atomic Force Microscopy (AFM) or nanoindentation systems. Tuning forks are used as probes during nanoindentation. By using the newly developed nanoindentation techniques for quasi-static nanoindentation experiments, the force information is extracted through the displacement of the indenter probe measured by a second probe with ultraresolution. For dynamic nanoindentation, frequency modulation techniques have been used to extract force information from a single indenter tuningfork probe. Thanks to the high quality of resonance (Q factor) of tuning fork probes, force measurements can be performed with an ultra high resolution. The accurate measurements of material properties on soft materials is used in characterization of microfabricated pillar sensors which can be used in measuring nN level of cell traction forces in a biomedical application. The techniques developed in this research also enable the system as an ultra-sensitive force sensor to apply nN scale lateral and vertical loads on microfabricated structures or biological specimens.
590 $a School code: 0465.
650 4 $a Nanotechnology. $3 526235
650 4 $a Electrical engineering. $3 649834
690 $a 0652
690 $a 0544
710 2 $a Rochester Institute of Technology. $b Microsystems Engineering. $3 1023613
773 0 $t Dissertation Abstracts International $g 77-04B(E).
790 $a 0465
791 $a Ph.D.
792 $a 2015
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3734775