東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Improving the signal-to-noise of nan...

Puster, Matthew.

FindBook

Google Book

Amazon

博客來

Improving the signal-to-noise of nanopore sensors.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Improving the signal-to-noise of nanopore sensors./
作者:	Puster, Matthew.
面頁冊數:	130 p.
附註:	Source: Dissertation Abstracts International, Volume: 76-11(E), Section: B.
Contained By:	Dissertation Abstracts International76-11B(E).
標題:	Nanoscience. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3709542
ISBN:	9781321851717

Improving the signal-to-noise of nanopore sensors.
Puster, Matthew.

Improving the signal-to-noise of nanopore sensors. - 130 p.

Source: Dissertation Abstracts International, Volume: 76-11(E), Section: B.

Thesis (Ph.D.)--University of Pennsylvania, 2015.

Over the last five years, solid state nanopore technology advanced to rival biological pores as a platform for next generation DNA sequencing. Fabrication improvements led to a reduction in nanopore diameter and membrane thickness, offering high precision sensing. Custom electronics were developed concomitant with low capacitance membranes for low-noise, high-bandwidth measurements. These advances improved our ability to detect small differences between translocating molecules and to measure short molecules translocating at high speeds.

ISBN: 9781321851717Subjects--Topical Terms:

587832
Nanoscience.

Improving the signal-to-noise of nanopore sensors.
LDR:03241nmm a2200337 4500 001 2066795
005 20160204121822.5
008 170521s2015 ||||||||||||||||| ||eng d
020 $a 9781321851717
035 $a (MiAaPQ)AAI3709542
035 $a AAI3709542
040 $a MiAaPQ $c MiAaPQ
100 1 $a Puster, Matthew. $3 3181645
245 1 0 $a Improving the signal-to-noise of nanopore sensors.
300 $a 130 p.
500 $a Source: Dissertation Abstracts International, Volume: 76-11(E), Section: B.
500 $a Adviser: Marija Drndic.
502 $a Thesis (Ph.D.)--University of Pennsylvania, 2015.
520 $a Over the last five years, solid state nanopore technology advanced to rival biological pores as a platform for next generation DNA sequencing. Fabrication improvements led to a reduction in nanopore diameter and membrane thickness, offering high precision sensing. Custom electronics were developed concomitant with low capacitance membranes for low-noise, high-bandwidth measurements. These advances improved our ability to detect small differences between translocating molecules and to measure short molecules translocating at high speeds.
520 $a This work focuses specifically on the challenge of maximizing the signal magnitude generated by the solid state nanopore. One way that this can be achieved is by thinning the membrane. We prove that it is possible to differentiate between DNA homopolymers by using nanopores with < 6 nm thickness and < 2 nm diameter. The results imply that solid state nanopores offer higher signal-to-noise than what is currently achieved with biological pores.
520 $a Attempts to reduce membrane thickness further by making nanopores in 2D materials proved to be limited by wetting and noise considerations. Instead, we developed an electron-irradiation-based thinning technique to thin Si-based films to the limit of their stability in order to determine the intrinsic limit of their detection capabilities. At these small thicknesses, we discovered unexpected blocked current structure in the translocation events, which we hypothesize to be related to the DNA molecule blocking current flow before entering the nanopore.
520 $a Then we outline an alternative technique for high signal-to-noise single-molecule measurement by using a nanopore to localize the molecule near a charge sensor. The design of such a device required the development of a technique to make nanopores without damaging the sensor. Results from measurements of these devices in solution are reported, along with discussion of methods for improving the sensitivity.
520 $a In the last section we report on somewhat unrelated experiments that involve imaging charge flow through structured quantum dot films. We use a combination of AFM, EFM, and TEM to map the topography, charge flow, and structural features in high resolution. We show that charge flow patterns can be clearly correlated with structural details in the film.
590 $a School code: 0175.
650 4 $a Nanoscience. $3 587832
650 4 $a Condensed matter physics. $3 3173567
650 4 $a Materials science. $3 543314
690 $a 0565
690 $a 0611
690 $a 0794
710 2 $a University of Pennsylvania. $b Materials Science and Engineering. $3 2102417
773 0 $t Dissertation Abstracts International $g 76-11B(E).
790 $a 0175
791 $a Ph.D.
792 $a 2015
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3709542