東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

The Effects of Layer Thickness on Dr...

Ingenthron, Cody.

Linked to FindBook

Google Book

Amazon

博客來

The Effects of Layer Thickness on Dry-Sliding Wear of Binder Jet Additively Manufactured Stainless Steel and Bronze Composite.

Record Type:	Electronic resources : Monograph/item
Title/Author:	The Effects of Layer Thickness on Dry-Sliding Wear of Binder Jet Additively Manufactured Stainless Steel and Bronze Composite./
Author:	Ingenthron, Cody.
Description:	54 p.
Notes:	Source: Masters Abstracts International, Volume: 54-03.
Contained By:	Masters Abstracts International54-03(E).
Subject:	Automotive engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1583519
ISBN:	9781321548044

The Effects of Layer Thickness on Dry-Sliding Wear of Binder Jet Additively Manufactured Stainless Steel and Bronze Composite.
Ingenthron, Cody.

The Effects of Layer Thickness on Dry-Sliding Wear of Binder Jet Additively Manufactured Stainless Steel and Bronze Composite. - 54 p.

Source: Masters Abstracts International, Volume: 54-03.

Thesis (M.S.)--Minnesota State University, Mankato, 2015.

This item must not be sold to any third party vendors.

Pin on disk wear testing was used to compare additively manufactured binder jet metal matrix composites. The process parameters were changed. The layer thickness and applied forces were varied for the experimental study. Three different layer thicknesses used were, 50microm, 100microm, and 200microm. The pin used was a 420 stainless pin. The wear characteristics of the disk were examined using pin-on-disc method. The material tested was a composite of 420 stainless steel, and 90-10 bronze. Samples were weighed before, during, and after the test to determine differences in mass. Wear tracks were examined using a Scanning Electron Microscope. The results indicated increased wear for both thickness, and larger forces.

ISBN: 9781321548044Subjects--Topical Terms:

2181195
Automotive engineering.

The Effects of Layer Thickness on Dry-Sliding Wear of Binder Jet Additively Manufactured Stainless Steel and Bronze Composite.
LDR:01768nmm a2200289 4500 001 2063234
005 20151027100438.5
008 170521s2015 ||||||||||||||||| ||eng d
020 $a 9781321548044
035 $a (MiAaPQ)AAI1583519
035 $a AAI1583519
040 $a MiAaPQ $c MiAaPQ
100 1 $a Ingenthron, Cody. $3 3177736
245 1 4 $a The Effects of Layer Thickness on Dry-Sliding Wear of Binder Jet Additively Manufactured Stainless Steel and Bronze Composite.
300 $a 54 p.
500 $a Source: Masters Abstracts International, Volume: 54-03.
500 $a Adviser: Kuldeep Agarwal.
502 $a Thesis (M.S.)--Minnesota State University, Mankato, 2015.
506 $a This item must not be sold to any third party vendors.
506 $a This item must not be added to any third party search indexes.
520 $a Pin on disk wear testing was used to compare additively manufactured binder jet metal matrix composites. The process parameters were changed. The layer thickness and applied forces were varied for the experimental study. Three different layer thicknesses used were, 50microm, 100microm, and 200microm. The pin used was a 420 stainless pin. The wear characteristics of the disk were examined using pin-on-disc method. The material tested was a composite of 420 stainless steel, and 90-10 bronze. Samples were weighed before, during, and after the test to determine differences in mass. Wear tracks were examined using a Scanning Electron Microscope. The results indicated increased wear for both thickness, and larger forces.
590 $a School code: 1510.
650 4 $a Automotive engineering. $3 2181195
690 $a 0540
710 2 $a Minnesota State University, Mankato. $b Manufacturing Engineering Technology: MS. $3 2098015
773 0 $t Masters Abstracts International $g 54-03(E).
790 $a 1510
791 $a M.S.
792 $a 2015
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1583519