東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Lumped-element tunable absorptive ba...

Purdue University., Electrical and Computer Engineering.

FindBook

Google Book

Amazon

博客來

Lumped-element tunable absorptive bandstop filter and its applications.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Lumped-element tunable absorptive bandstop filter and its applications./
作者:	Kim, Byung Guk.
面頁冊數:	115 p.
附註:	Source: Dissertation Abstracts International, Volume: 76-01(E), Section: B.
Contained By:	Dissertation Abstracts International76-01B(E).
標題:	Electrical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3636264
ISBN:	9781321177916

Lumped-element tunable absorptive bandstop filter and its applications.
Kim, Byung Guk.

Lumped-element tunable absorptive bandstop filter and its applications. - 115 p.

Source: Dissertation Abstracts International, Volume: 76-01(E), Section: B.

Thesis (Ph.D.)--Purdue University, 2014.

This item must not be sold to any third party vendors.

To avoid the cost, large size, and complexity of going off-chip between individually packaged components, it is desirable to integrate as many components as possible. For on-chip passive filter design, size constraints and the quality factor limit the amount of attenuation that can be achieved. This work demonstrates the use of absorptive bandstop filters which gives anomalously deep notches for a given Q-factor. A lumped-element-only topology enables a realization on a chip for the first time. For reconfigurable RF front-ends, a frequency-agile design is newly developed with Q-tunable resonators because an absorptive bandstop filter must balance both intrinsic Q of the resonators and the resonant frequency of the filter. Despite using small-size, low-Q resonators in the bandstop filter design, a large stopband attenuation with a capability of frequency tuning is achieved with potential to suppress potential interference or an image frequency signal. Higher-order absorptive bandstop filters which give higher selectivity are also demonstrated.

ISBN: 9781321177916Subjects--Topical Terms:

649834
Electrical engineering.

Lumped-element tunable absorptive bandstop filter and its applications.
LDR:03145nmm a2200313 4500 001 2059497
005 20150805065223.5
008 170521s2014 ||||||||||||||||| ||eng d
020 $a 9781321177916
035 $a (MiAaPQ)AAI3636264
035 $a AAI3636264
040 $a MiAaPQ $c MiAaPQ
100 1 $a Kim, Byung Guk. $3 3173574
245 1 0 $a Lumped-element tunable absorptive bandstop filter and its applications.
300 $a 115 p.
500 $a Source: Dissertation Abstracts International, Volume: 76-01(E), Section: B.
500 $a Advisers: William J. Chappell; Pedro P. Irazoqui.
502 $a Thesis (Ph.D.)--Purdue University, 2014.
506 $a This item must not be sold to any third party vendors.
520 $a To avoid the cost, large size, and complexity of going off-chip between individually packaged components, it is desirable to integrate as many components as possible. For on-chip passive filter design, size constraints and the quality factor limit the amount of attenuation that can be achieved. This work demonstrates the use of absorptive bandstop filters which gives anomalously deep notches for a given Q-factor. A lumped-element-only topology enables a realization on a chip for the first time. For reconfigurable RF front-ends, a frequency-agile design is newly developed with Q-tunable resonators because an absorptive bandstop filter must balance both intrinsic Q of the resonators and the resonant frequency of the filter. Despite using small-size, low-Q resonators in the bandstop filter design, a large stopband attenuation with a capability of frequency tuning is achieved with potential to suppress potential interference or an image frequency signal. Higher-order absorptive bandstop filters which give higher selectivity are also demonstrated.
520 $a The sensing of the unused bands is a pre-requisite and important function so that the cognitive radio system can track and use available frequencies. When the ultra-wideband ADC is utilized for sensing to find the unused bands or read the spectrum availability, both the high power interferences and small power signals are the signals we are interested, but the wideband ADC has a limited dynamic range. Since we have the signals with various frequencies and power levels, it is required to have something that can give different gains at different frequencies. This work proposes a frequency equalizer which gives selective attenuation at desired different frequencies, and absorptive bandstop filter with variable attenuation is proposed in this work. For a wide-band receiver or application, it is not typical for AGC to control different gain or attenuation levels at different frequencies. Using frequency selective attenuation, it is desirable in order to suppress a large signal before the signal compresses a wideband sampler, but still allowing us to receive and monitor the signal.
590 $a School code: 0183.
650 4 $a Electrical engineering. $3 649834
650 4 $a Electromagnetics. $3 3173223
650 4 $a Computer engineering. $3 621879
690 $a 0544
690 $a 0607
690 $a 0464
710 2 $a Purdue University. $b Electrical and Computer Engineering. $3 1018497
773 0 $t Dissertation Abstracts International $g 76-01B(E).
790 $a 0183
791 $a Ph.D.
792 $a 2014
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3636264