東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Process optimization: Ultrasonic wel...

Riedl, Jessica Ann.

FindBook

Google Book

Amazon

博客來

Process optimization: Ultrasonic welding of coextruded polymer film.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Process optimization: Ultrasonic welding of coextruded polymer film./
作者:	Riedl, Jessica Ann.
面頁冊數:	92 p.
附註:	Source: Masters Abstracts International, Volume: 52-03.
Contained By:	Masters Abstracts International52-03(E).
標題:	Engineering, Agricultural. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1546435
ISBN:	9781303454172

Process optimization: Ultrasonic welding of coextruded polymer film.
Riedl, Jessica Ann.

Process optimization: Ultrasonic welding of coextruded polymer film. - 92 p.

Source: Masters Abstracts International, Volume: 52-03.

Thesis (M.S.)--Iowa State University, 2013.

The purpose of this research is to determine the effect of various weld and machine parameters on ultrasonic weld strength. Specifically, welds with six different triple-layer coextruded polyethylene and metallized polypropylene films were examined. These materials were welded in separate experimental studies using a bench top weld system and a high production volume packaging machine.

ISBN: 9781303454172Subjects--Topical Terms:

1019504
Engineering, Agricultural.

Process optimization: Ultrasonic welding of coextruded polymer film.
LDR:02509nam a2200301 4500 001 1965993
005 20141106122958.5
008 150210s2013 ||||||||||||||||| ||eng d
020 $a 9781303454172
035 $a (MiAaPQ)AAI1546435
035 $a AAI1546435
040 $a MiAaPQ $c MiAaPQ
100 1 $a Riedl, Jessica Ann. $3 2102759
245 1 0 $a Process optimization: Ultrasonic welding of coextruded polymer film.
300 $a 92 p.
500 $a Source: Masters Abstracts International, Volume: 52-03.
500 $a Adviser: David A. Grewell.
502 $a Thesis (M.S.)--Iowa State University, 2013.
520 $a The purpose of this research is to determine the effect of various weld and machine parameters on ultrasonic weld strength. Specifically, welds with six different triple-layer coextruded polyethylene and metallized polypropylene films were examined. These materials were welded in separate experimental studies using a bench top weld system and a high production volume packaging machine.
520 $a The first study investigated the effect of a range of weld forces, energies, and amplitudes in a lap joint geometry using a bench top ultrasonic plunge welding system. Weld strength was determined by measuring resistance to tearing and peel and shear strength. It was observed that low energy and low weld force had a significant effect on shear strength welds for all materials. High peel strength was observed at relatively high weld forces and energies, and high tear resistance was observed at relatively high forces, high amplitudes, and mid-range energy levels.
520 $a The second study determined the suitability for the same materials to be sealed as bags for packaging applications in a vertical "form fill seal" machine. This machine was equipped with an ultrasonic end seal jaw. The machine factors tested in this study include energy, amplitude, and production rate (the rate at which bags are created/welded) to determine the effect on peel strength. It was observed that low energy and amplitude correlated with high strength for the top weld (top of bag) of one material and low production rate resulted in high strength for the top weld of two materials as well as the bottom weld for two materials. Data for the sixth material was inconclusive.
590 $a School code: 0097.
650 4 $a Engineering, Agricultural. $3 1019504
650 4 $a Engineering, Industrial. $3 626639
690 $a 0539
690 $a 0546
710 2 $a Iowa State University. $b Agricultural and Biosystems Engineering. $3 1026283
773 0 $t Masters Abstracts International $g 52-03(E).
790 $a 0097
791 $a M.S.
792 $a 2013
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1546435