東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Use of vibrator performance data to ...

Al-Ali, Mustafa Naser Ali.

FindBook

Google Book

Amazon

博客來

Use of vibrator performance data to improve near-surface velocity determination.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Use of vibrator performance data to improve near-surface velocity determination./
作者:	Al-Ali, Mustafa Naser Ali.
面頁冊數:	137 p.
附註:	Source: Masters Abstracts International, Volume: 41-03, page: 0745.
Contained By:	Masters Abstracts International41-03.
標題:	Geology. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1411248
ISBN:	0493873295

Use of vibrator performance data to improve near-surface velocity determination.
Al-Ali, Mustafa Naser Ali.

Use of vibrator performance data to improve near-surface velocity determination. - 137 p.

Source: Masters Abstracts International, Volume: 41-03, page: 0745.

Thesis (M.S.)--King Fahd University of Petroleum and Minerals (Saudi Arabia), 2002.

Reliable estimation of near-surface P-wave velocity is one of the key problems in land seismic exploration. Uphole surveys are usually used to acquire near-surface velocity information. However, in the presence of rapidly varying near-surface geology, such estimation is inherently uncertain due to the sparse uphole sampling grid.

ISBN: 0493873295Subjects--Topical Terms:

516570
Geology.

Use of vibrator performance data to improve near-surface velocity determination.
LDR:02342nmm 2200289 4500 001 1866200
005 20041220114133.5
008 130614s2002 eng d
020 $a 0493873295
035 $a (UnM)AAI1411248
035 $a AAI1411248
040 $a UnM $c UnM
100 1 $a Al-Ali, Mustafa Naser Ali. $3 1953609
245 1 0 $a Use of vibrator performance data to improve near-surface velocity determination.
300 $a 137 p.
500 $a Source: Masters Abstracts International, Volume: 41-03, page: 0745.
502 $a Thesis (M.S.)--King Fahd University of Petroleum and Minerals (Saudi Arabia), 2002.
520 $a Reliable estimation of near-surface P-wave velocity is one of the key problems in land seismic exploration. Uphole surveys are usually used to acquire near-surface velocity information. However, in the presence of rapidly varying near-surface geology, such estimation is inherently uncertain due to the sparse uphole sampling grid.
520 $a A principal goal of this study is to determine a relationship between the densely sampled vibrator performance control data, obtained in the course of normal seismic data acquisition, and uphole P-wave velocity so that the two data sets can be integrated using geostatistical techniques to provide improved near surface velocity models.
520 $a A theoretical model was derived relating near-surface P-wave velocity to vibrator control system estimates of ground stiffness and viscosity. Estimated velocity from these vibrator measurements exhibited good statistical correlation over a large 3D seismic survey area with uphole velocities down to a 50-meter depth.
520 $a Two 3D near-surface velocity models were constructed using uphole data alone as well as combined with vibrator information, both of which were used to calculate statics. The seismic imaging results obtained using these statics were found to be better than using uphole data alone. On the basis of these results, we concluded that the integrated model resolved statics better than models that individually utilized uphole data through geostatistical and conventional computation techniques.
590 $a School code: 1088.
650 4 $a Geology. $3 516570
650 4 $a Geophysics. $3 535228
690 $a 0372
690 $a 0373
710 2 0 $a King Fahd University of Petroleum and Minerals (Saudi Arabia). $3 1030607
773 0 $t Masters Abstracts International $g 41-03.
790 $a 1088
791 $a M.S.
792 $a 2002
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1411248