東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Simulation of metal transfer and wel...

Wang, Fang.

FindBook

Google Book

Amazon

博客來

Simulation of metal transfer and weld pool development in gas metal arc welding of thin sheet metals.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Simulation of metal transfer and weld pool development in gas metal arc welding of thin sheet metals./
作者:	Wang, Fang.
面頁冊數:	148 p.
附註:	Source: Dissertation Abstracts International, Volume: 64-06, Section: B, page: 2886.
Contained By:	Dissertation Abstracts International64-06B.
標題:	Engineering, Mechanical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3096233

Simulation of metal transfer and weld pool development in gas metal arc welding of thin sheet metals.
Wang, Fang.

Simulation of metal transfer and weld pool development in gas metal arc welding of thin sheet metals. - 148 p.

Source: Dissertation Abstracts International, Volume: 64-06, Section: B, page: 2886.

Thesis (Ph.D.)--University of Michigan, 2003.

Gas metal arc welding (GMAW) is the most commonly used arc welding method in industry for joining steels and aluminum alloys. But due to the mathematical difficulties associated with the free surface motion of the molten droplet and the weld pool, the process is not well understood and the development of new welding procedures in the manufacturing industry highly depends on expensive, time-consuming and experience-based trial and error. In this dissertation, numerical methods are developed to overcome the difficulties and to simulate the metal transfer and weld pool development in the GMAW of sheet metals. The simulations are validated by experiments and used to study an industrial welding process.Subjects--Topical Terms:

783786
Engineering, Mechanical.

Simulation of metal transfer and weld pool development in gas metal arc welding of thin sheet metals.
LDR:03835nmm 2200337 4500 001 1861914
005 20041215074119.5
008 130614s2003 eng d
035 $a (UnM)AAI3096233
035 $a AAI3096233
040 $a UnM $c UnM
100 1 $a Wang, Fang. $3 1064783
245 1 0 $a Simulation of metal transfer and weld pool development in gas metal arc welding of thin sheet metals.
300 $a 148 p.
500 $a Source: Dissertation Abstracts International, Volume: 64-06, Section: B, page: 2886.
500 $a Co-Chairs: Shixin Jack Hu; Elijah Kannatey-Asibu, Jr.
502 $a Thesis (Ph.D.)--University of Michigan, 2003.
520 $a Gas metal arc welding (GMAW) is the most commonly used arc welding method in industry for joining steels and aluminum alloys. But due to the mathematical difficulties associated with the free surface motion of the molten droplet and the weld pool, the process is not well understood and the development of new welding procedures in the manufacturing industry highly depends on expensive, time-consuming and experience-based trial and error. In this dissertation, numerical methods are developed to overcome the difficulties and to simulate the metal transfer and weld pool development in the GMAW of sheet metals. The simulations are validated by experiments and used to study an industrial welding process.
520 $a A numerical procedure is first developed to model the free surface motion in fusion welding processes. Thermal and electromagnetic models are integrated with the fluid models. Recommendations are made on the selection and improvement of publicly available numerical algorithms, while alternative methods are also reviewed.
520 $a A model combining the enthalpy, effective-viscosity and volume-of-fluid methods is then developed to simulate the metal transfer process in globular, spray and short-circuiting transfer modes. The model not only describes the influence of gravity, electromagnetic force and surface tension on droplet profile and transfer frequency, but also models the nonisothermal phenomena such as heat transfer and phase change. The melting front motion, the droplet detachment and oscillation, the satellite formation and the fluid convection within the droplet are analyzed. It has been found that the taper formation in spray transfer is closely related to the heat input on the unmelted portion of the welding wire, and the taper formation affects the globular-spray transition by decelerating the transfer process. Experiments with a high-speed motion analyzer validate the simulation results.
520 $a The model is then extended to simulate the initiation, development and solidification of the weld pool, with consideration of the droplet impingement on the pool surface. The characteristics of physical variables in the weld pool are analyzed. Burn-through of thin sheet metals and penetration of a multi-layered workpiece are also simulated. Experiments are used to verify the predicted weld penetration.
520 $a Finally, numerical simulation is used to analyze an industrial welding process---the gas metal arc spot welding of multi-layered workpieces. The traditional spot welding and plug welding methods are simulated. It is shown that the plug method can ensure a stable short-circuiting transfer through a pre-made hole. Both the simulation and tensile-shear tests show that the plug method improves the penetration consistency by ensuring the effective joint diameter.
590 $a School code: 0127.
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Engineering, Metallurgy. $3 1023648
650 4 $a Engineering, Materials Science. $3 1017759
690 $a 0548
690 $a 0743
690 $a 0794
710 2 0 $a University of Michigan. $3 777416
773 0 $t Dissertation Abstracts International $g 64-06B.
790 1 0 $a Hu, Shixin Jack, $e advisor
790 1 0 $a Kannatey-Asibu, Elijah, Jr., $e advisor
790 $a 0127
791 $a Ph.D.
792 $a 2003
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3096233