東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Nanostructure fabrication and patter...

Yu, Shufang.

FindBook

Google Book

Amazon

博客來

Nanostructure fabrication and patterning for use in chemical separations and sensors.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Nanostructure fabrication and patterning for use in chemical separations and sensors./
作者:	Yu, Shufang.
面頁冊數:	95 p.
附註:	Source: Dissertation Abstracts International, Volume: 64-12, Section: B, page: 6067.
Contained By:	Dissertation Abstracts International64-12B.
標題:	Chemistry, Analytical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3117390

Nanostructure fabrication and patterning for use in chemical separations and sensors.
Yu, Shufang.

Nanostructure fabrication and patterning for use in chemical separations and sensors. - 95 p.

Source: Dissertation Abstracts International, Volume: 64-12, Section: B, page: 6067.

Thesis (Ph.D.)--University of Florida, 2003.

The goals of this research are to make nanostructures with controlled dimensions and to investigate potential applications in chemical separations and sensors. There are three parts involved in this work. The first part is engineered gold nanotube membranes and their applications in protein separations. The membranes have narrow pore size distribution, high selectivity, and they are relatively easily modified to prevent protein adsorption. Because of the low transport rate or throughput through the membrane, two types of driving forces were applied to increase transport flux-application of a transmembrane pressure or a transmembrane potential difference. Size-sieving effect, charge effect and pH effect have been investigated.Subjects--Topical Terms:

586156
Chemistry, Analytical.

Nanostructure fabrication and patterning for use in chemical separations and sensors.
LDR:03102nmm 2200301 4500 001 1861438
005 20041111121759.5
008 130614s2003 eng d
035 $a (UnM)AAI3117390
035 $a AAI3117390
040 $a UnM $c UnM
100 1 $a Yu, Shufang. $3 1949038
245 1 0 $a Nanostructure fabrication and patterning for use in chemical separations and sensors.
300 $a 95 p.
500 $a Source: Dissertation Abstracts International, Volume: 64-12, Section: B, page: 6067.
500 $a Chair: Charles R. Martin.
502 $a Thesis (Ph.D.)--University of Florida, 2003.
520 $a The goals of this research are to make nanostructures with controlled dimensions and to investigate potential applications in chemical separations and sensors. There are three parts involved in this work. The first part is engineered gold nanotube membranes and their applications in protein separations. The membranes have narrow pore size distribution, high selectivity, and they are relatively easily modified to prevent protein adsorption. Because of the low transport rate or throughput through the membrane, two types of driving forces were applied to increase transport flux-application of a transmembrane pressure or a transmembrane potential difference. Size-sieving effect, charge effect and pH effect have been investigated.
520 $a The second part of this work is a method developed to increase the efficiency of nanowires as building blocks for supramolecular assembly. The low efficiency results from some recessed nanowires within the template membrane. Oxygen plasma etching has been used to remove part of the polymer template and leave the nanowire ends exposed. By adjusting etching time, the length of the protruding nanowires can be controlled. Besides high efficiency as building blocks, these protruding nanowires can be used to increase electrical contact between the nanowire containing membrane and a substrate metal surface.
520 $a In the third part of this work, highly ordered alumina membranes were used as masks to etch substrates such as glass to obtain arrays of nanowells. The depth of the nanowells can be controlled by varying the etch time. The inside and outside of the nanowells can be modified with different chemistries such as hydrophilic and hydrophobic functional groups. Friction measurements with the atomic force microscope have been conducted to obtain the friction difference between the different functional groups. The friction difference shows the interaction difference between the AFM tip and the terminal functional groups on the substrate. Since the inside and outside of the nanowells can be modified with different molecular linkers, desired chemical functional groups or nanoparticles can attach to either the inside or outside surfaces.
590 $a School code: 0070.
650 4 $a Chemistry, Analytical. $3 586156
650 4 $a Engineering, Materials Science. $3 1017759
650 4 $a Physics, Condensed Matter. $3 1018743
690 $a 0486
690 $a 0794
690 $a 0611
710 2 0 $a University of Florida. $3 718949
773 0 $t Dissertation Abstracts International $g 64-12B.
790 1 0 $a Martin, Charles R., $e advisor
790 $a 0070
791 $a Ph.D.
792 $a 2003
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3117390