東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Assessing mechanical properties from...

DiCarlo, Anthony Albert.

Linked to FindBook

Google Book

Amazon

博客來

Assessing mechanical properties from cone indentation hardness.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Assessing mechanical properties from cone indentation hardness./
Author:	DiCarlo, Anthony Albert.
Description:	141 p.
Notes:	Source: Dissertation Abstracts International, Volume: 64-06, Section: B, page: 2875.
Contained By:	Dissertation Abstracts International64-06B.
Subject:	Engineering, Mechanical. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3093536

Assessing mechanical properties from cone indentation hardness.
DiCarlo, Anthony Albert.

Assessing mechanical properties from cone indentation hardness. - 141 p.

Source: Dissertation Abstracts International, Volume: 64-06, Section: B, page: 2875.

Thesis (Ph.D.)--University of California, Santa Barbara, 2003.

This dissertation investigates methods for assessing the mechanical properties of materials using hardness values obtained from cone indentations. A broad range of isotropic metallic materials was simulated using finite element analysis. In particular, the elastic and plastic bulk properties, which define the stress-strain behavior of materials that exhibit power law hardening, are studied. Other investigators have found that the Young's modulus, <italic>E</italic>, can be determined from the unloading data of a cone indentation. Therefore, the remaining properties of interest, in this study, are the yield strength, <italic>Y</italic>, and the work hardening exponent, <italic>n</italic>.Subjects--Topical Terms:

783786
Engineering, Mechanical.

Assessing mechanical properties from cone indentation hardness.
LDR:03156nmm 2200301 4500 001 1858052
005 20041006074914.5
008 130614s2003 eng d
035 $a (UnM)AAI3093536
035 $a AAI3093536
040 $a UnM $c UnM
100 1 $a DiCarlo, Anthony Albert. $3 1945757
245 1 0 $a Assessing mechanical properties from cone indentation hardness.
300 $a 141 p.
500 $a Source: Dissertation Abstracts International, Volume: 64-06, Section: B, page: 2875.
500 $a Chair: Henry T. Y. Yang.
502 $a Thesis (Ph.D.)--University of California, Santa Barbara, 2003.
520 $a This dissertation investigates methods for assessing the mechanical properties of materials using hardness values obtained from cone indentations. A broad range of isotropic metallic materials was simulated using finite element analysis. In particular, the elastic and plastic bulk properties, which define the stress-strain behavior of materials that exhibit power law hardening, are studied. Other investigators have found that the Young's modulus, <italic>E</italic>, can be determined from the unloading data of a cone indentation. Therefore, the remaining properties of interest, in this study, are the yield strength, <italic>Y</italic>, and the work hardening exponent, <italic>n</italic>.
520 $a Atkins and Tabor have conducted pioneering work in the area of determining the stress-strain behavior of a metallic material from cone indentation experiments. This work has been re-visited in this study using computational models implementing an expanded range of mechanical properties. Consequently, discrepancies in this prediction method were uncovered when the mechanical properties were outside of the original range studied. As a result, two new prediction methods have been developed using the data collected from the finite element simulations in conjunction with a regression technique. The first method correlates the non-dimensional hardness values, <italic>H/E</italic>, collected from five cone indentations to the non-dimensional mechanical properties, <italic>Y/E </italic> and <italic>n</italic>. The second method is similar in principle, but uses two hardness values as opposed to five. The yield strength can be estimated with <italic>a priori</italic> knowledge of <italic>E</italic>. Both of these methods are compared to the method developed by Atkins and Tabor.
520 $a Although the majority of the work mentioned is focused on the macro-scale, bulk mechanical properties, there is some investigation of meso-scale cone indentations. At the meso-scale, the number of geometric dislocations is significant enough to noticeably increase the strength of a material. This length scale effect is studied for various angled cone indentations through the implementation of Cosserat continuum mechanics into the finite element program.
590 $a School code: 0035.
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Engineering, Metallurgy. $3 1023648
650 4 $a Engineering, Materials Science. $3 1017759
690 $a 0548
690 $a 0743
690 $a 0794
710 2 0 $a University of California, Santa Barbara. $3 1017586
773 0 $t Dissertation Abstracts International $g 64-06B.
790 1 0 $a Yang, Henry T. Y., $e advisor
790 $a 0035
791 $a Ph.D.
792 $a 2003
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3093536