東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Thin-film Foerster-transfer-based co...

Gupta, Rahul.

FindBook

Google Book

Amazon

博客來

Thin-film Foerster-transfer-based conjugated polymer blend lasers and light emitting diodes.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Thin-film Foerster-transfer-based conjugated polymer blend lasers and light emitting diodes./
作者:	Gupta, Rahul.
面頁冊數:	97 p.
附註:	Source: Dissertation Abstracts International, Volume: 62-07, Section: B, page: 3342.
Contained By:	Dissertation Abstracts International62-07B.
標題:	Engineering, Materials Science. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3020274
ISBN:	0493315683

Thin-film Foerster-transfer-based conjugated polymer blend lasers and light emitting diodes.
Gupta, Rahul.

Thin-film Foerster-transfer-based conjugated polymer blend lasers and light emitting diodes. - 97 p.

Source: Dissertation Abstracts International, Volume: 62-07, Section: B, page: 3342.

Thesis (Ph.D.)--University of California, Santa Barbara, 2000.

Since the discovery of stimulated emission in solid films of conjugated polymers and subsequent demonstration of optically pumped lasing, the focus has shifted towards making diode lasers. Low mobilities and difficult charge carrier injection limit the current densities in light emitting diodes made using polymers. The current densities corresponding to the optically pumped lasing thresholds are difficult to achieve in electrically pumped devices. In order to make diode lasers, the thresholds for lasing must be reduced.

ISBN: 0493315683Subjects--Topical Terms:

1017759
Engineering, Materials Science.

Thin-film Foerster-transfer-based conjugated polymer blend lasers and light emitting diodes.
LDR:03254nmm 2200325 4500 001 1848083
005 20051108101747.5
008 130614s2000 eng d
020 $a 0493315683
035 $a (UnM)AAI3020274
035 $a AAI3020274
040 $a UnM $c UnM
100 1 $a Gupta, Rahul. $3 1307720
245 1 0 $a Thin-film Foerster-transfer-based conjugated polymer blend lasers and light emitting diodes.
300 $a 97 p.
500 $a Source: Dissertation Abstracts International, Volume: 62-07, Section: B, page: 3342.
500 $a Chairperson: Alan J. Heeger.
502 $a Thesis (Ph.D.)--University of California, Santa Barbara, 2000.
520 $a Since the discovery of stimulated emission in solid films of conjugated polymers and subsequent demonstration of optically pumped lasing, the focus has shifted towards making diode lasers. Low mobilities and difficult charge carrier injection limit the current densities in light emitting diodes made using polymers. The current densities corresponding to the optically pumped lasing thresholds are difficult to achieve in electrically pumped devices. In order to make diode lasers, the thresholds for lasing must be reduced.
520 $a Self-absorption losses limit the thresholds for lasing in conjugated polymers. We have reduced these losses by spectrally shifting the emission away from the absorption edge. This is achieved by making blends of conjugated polymers, in which the excitations are transferred non-radiatively (Forster transfer) from a higher band-gap polymer (donor) to a lower band-gap polymer (acceptor).
520 $a Forster transfer has been characterized by measuring the absorption and emission spectra of various blends. Photoluminescence excitation spectroscopy and time resolved pump-probe spectroscopy confirm the presence of Forster transfer. The rate of Forster transfer is dependent on the spectral overlap of the donor emission with acceptor absorption and on the donor-acceptor spacing. For optimized blends, the transfer takes place within 10 ps of excitation. This is faster than the excitation lifetimes in the donor (600 ps) and the efficiency of transfer can be as high as 99.8%.
520 $a Propagation losses in the films were reduced from &sim;90 cm-1 to 3 cm-1 by using blends. Thresholds as low as 100 W/cm2 were achieved in distributed feedback lasers made using these blends, an order of magnitude lower than the thresholds reported earlier. Unfortunately, the light emitting diodes made using the blends of conjugated polymers have high turn-on voltages, a result of charge carrier trapping in the acceptor molecules. Thus, the prospects of making direct injection diode lasers using the blends are not promising.
520 $a The output of the GaN LED's made at UCSB is around 80 W/cm2, close to the thresholds of the DFB lasers made using conjugated polymer blends. The emission from GaN LED's and lasers can be used to optically pump the polymers to make hybrid lasers.
590 $a School code: 0035.
650 4 $a Engineering, Materials Science. $3 1017759
650 4 $a Physics, Condensed Matter. $3 1018743
690 $a 0794
690 $a 0611
710 2 0 $a University of California, Santa Barbara. $3 1017586
773 0 $t Dissertation Abstracts International $g 62-07B.
790 1 0 $a Heeger, Alan J., $e advisor
790 $a 0035
791 $a Ph.D.
792 $a 2000
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3020274