東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Mechanical processing of two-phase a...

Lee, Sangmok.

FindBook

Google Book

Amazon

博客來

Mechanical processing of two-phase alloys by severe plastic deformation.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Mechanical processing of two-phase alloys by severe plastic deformation./
作者:	Lee, Sangmok.
面頁冊數:	192 p.
附註:	Source: Dissertation Abstracts International, Volume: 62-09, Section: B, page: 4176.
Contained By:	Dissertation Abstracts International62-09B.
標題:	Engineering, Materials Science. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3027739
ISBN:	0493397965

Mechanical processing of two-phase alloys by severe plastic deformation.
Lee, Sangmok.

Mechanical processing of two-phase alloys by severe plastic deformation. - 192 p.

Source: Dissertation Abstracts International, Volume: 62-09, Section: B, page: 4176.

Thesis (Ph.D.)--University of Southern California, 2001.

Equal channel angular pressing (ECAP) is a very promising method among several severe plastic deformation (SPD) processes since it offers a potential for high strain rate superplasticity by effective grain refinement to the level of the submicron or nanoscale. Therefore, microduplex alloys such as Zn-22% Al and Pb-62% Sn alloys were subjected to ECAP to study their mechanical properties by varying several parameters available during the ECAP process such as the pressing temperature and the number of pressings.

ISBN: 0493397965Subjects--Topical Terms:

1017759
Engineering, Materials Science.

Mechanical processing of two-phase alloys by severe plastic deformation.
LDR:03079nmm 2200325 4500 001 1846131
005 20051117110053.5
008 130614s2001 eng d
020 $a 0493397965
035 $a (UnM)AAI3027739
035 $a AAI3027739
040 $a UnM $c UnM
100 1 $a Lee, Sangmok. $3 1934262
245 1 0 $a Mechanical processing of two-phase alloys by severe plastic deformation.
300 $a 192 p.
500 $a Source: Dissertation Abstracts International, Volume: 62-09, Section: B, page: 4176.
500 $a Adviser: Terence G. Langdon.
502 $a Thesis (Ph.D.)--University of Southern California, 2001.
520 $a Equal channel angular pressing (ECAP) is a very promising method among several severe plastic deformation (SPD) processes since it offers a potential for high strain rate superplasticity by effective grain refinement to the level of the submicron or nanoscale. Therefore, microduplex alloys such as Zn-22% Al and Pb-62% Sn alloys were subjected to ECAP to study their mechanical properties by varying several parameters available during the ECAP process such as the pressing temperature and the number of pressings.
520 $a The Zn-22% Al alloy was subjected to ECAP at temperatures of 373 and 473 K with a number of pressings up to 4, 8 and 12 passes via route B C where the sample is rotated by 90° in the same sense between each pressing. Superplasticity was promoted to a large extent for specimens pressed at both temperatures. It was realized that the number of pressings greatly influenced the superplasticity in the Zn-22% Al alloy such that the peak strain rate as well as the ductility tended to be enhanced with increasing numbers of pressings.
520 $a The microstructure in the Zn-22% Al alloy was studied after the ECAP process. Similar phases were agglomerated at the low numbers of pressings but agglomeration tended to disappear at higher numbers of pressings. It was considered that true mixing of two different phases aided the superplasticity since the mechanical results showed that superplasticity was progressively enhanced as the agglomeration decreased.
520 $a A study of the effect of the number of pressings on the strength of the Zn-22% Al alloy showed that the deformation occurred during microindentation in the high temperature deformation regime rather than by the Hall-Petch relationship. A two-dimensional measurement of microhardness on the surface of the cross-section of the billet also showed that friction between the billet and the die surface introduced a local variation in hardness.
520 $a A Pb-62% Sn eutectic alloy was subjected to ECAP up to 4, 8 and 16 passes via route BC. It is shown that superplasticity is not much enhanced in this alloy due to a less effective grain refinement in this alloy.
590 $a School code: 0208.
650 4 $a Engineering, Materials Science. $3 1017759
650 4 $a Engineering, Metallurgy. $3 1023648
690 $a 0794
690 $a 0743
710 2 0 $a University of Southern California. $3 700129
773 0 $t Dissertation Abstracts International $g 62-09B.
790 1 0 $a Langdon, Terence G., $e advisor
790 $a 0208
791 $a Ph.D.
792 $a 2001
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3027739