語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Evaluation of the superplastic poten...
~
Lee, Sungwon.
FindBook
Google Book
Amazon
博客來
Evaluation of the superplastic potential in commercial aluminum alloys through equal-channel angular pressing.
紀錄類型:
書目-電子資源 : Monograph/item
正題名/作者:
Evaluation of the superplastic potential in commercial aluminum alloys through equal-channel angular pressing./
作者:
Lee, Sungwon.
面頁冊數:
197 p.
附註:
Source: Dissertation Abstracts International, Volume: 62-06, Section: B, page: 2909.
Contained By:
Dissertation Abstracts International62-06B.
標題:
Engineering, Materials Science. -
電子資源:
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3018014
ISBN:
0493285954
Evaluation of the superplastic potential in commercial aluminum alloys through equal-channel angular pressing.
Lee, Sungwon.
Evaluation of the superplastic potential in commercial aluminum alloys through equal-channel angular pressing.
- 197 p.
Source: Dissertation Abstracts International, Volume: 62-06, Section: B, page: 2909.
Thesis (Ph.D.)--University of Southern California, 2000.
Since Equal-Channel Angular (ECA) pressing offers significant advantages for grain refinement and meets the requirements for superplasticity, it has been chosen as a basic tool of material processing for this study. The effect of ECA pressing on superplasticity of commercial aluminum alloys was investigated by changing some of the basic parameters for ECA pressing such as the pressing routes, the number of pressings and the pressing temperatures.
ISBN: 0493285954Subjects--Topical Terms:
1017759
Engineering, Materials Science.
Evaluation of the superplastic potential in commercial aluminum alloys through equal-channel angular pressing.
LDR
:03009nmm 2200325 4500
001
1846130
005
20051117110053.5
008
130614s2000 eng d
020
$a
0493285954
035
$a
(UnM)AAI3018014
035
$a
AAI3018014
040
$a
UnM
$c
UnM
100
1
$a
Lee, Sungwon.
$3
1934261
245
1 0
$a
Evaluation of the superplastic potential in commercial aluminum alloys through equal-channel angular pressing.
300
$a
197 p.
500
$a
Source: Dissertation Abstracts International, Volume: 62-06, Section: B, page: 2909.
500
$a
Adviser: Terence G. Langdon.
502
$a
Thesis (Ph.D.)--University of Southern California, 2000.
520
$a
Since Equal-Channel Angular (ECA) pressing offers significant advantages for grain refinement and meets the requirements for superplasticity, it has been chosen as a basic tool of material processing for this study. The effect of ECA pressing on superplasticity of commercial aluminum alloys was investigated by changing some of the basic parameters for ECA pressing such as the pressing routes, the number of pressings and the pressing temperatures.
520
$a
The ECA pressing was applied to pure aluminum and it is determined that the variations of microhardness are large throughout the length of the pressed billet for lower numbers of passes but a very uniform microstructure is obtained throughout the billet after higher numbers of passes.
520
$a
Two new combination pressing route, C-BC and BC-C, were designed, applied to both pure aluminum and an Al-2024 alloy and compared to route BC. It is concluded that route BC is the most reliable pressing route because the two combination routes have no clear advantage in terms of superplasticity over route BC.
520
$a
The effect of small amounts of addition of Sc and Zr into pure aluminum and an Al-Mg binary alloy was investigated. It is determined that the addition of both Sc and Zr at the same time is more effective in promoting superplasticity than the addition of only one element.
520
$a
The ECA pressing was applied to commerical aluminum alloys such as Al-2024, Al-2004 and Al-1420 alloys. The ECA pressing at high temperatures always produced superior superplasticity over the ECA pressing at room temperature. After ECA pressing of the commercial Al-2024 and Al-2094 alloys, furthermore, the optimum superplastic conditions were shifted to both a lower testing temperature and a higher imposed strain rate. An exceptional high strain rate superplasticity (HSR SP) was obtained for every aluminum alloy. For example, an elongation of ∼950% was recorded at a temperature of 673 K with a strain rate of 1 s-1 when the Al-1420 alloy was ECA pressed to a strain of ∼12.
590
$a
School code: 0208.
650
4
$a
Engineering, Materials Science.
$3
1017759
650
4
$a
Engineering, Metallurgy.
$3
1023648
690
$a
0794
690
$a
0743
710
2 0
$a
University of Southern California.
$3
700129
773
0
$t
Dissertation Abstracts International
$g
62-06B.
790
1 0
$a
Langdon, Terence G.,
$e
advisor
790
$a
0208
791
$a
Ph.D.
792
$a
2000
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3018014
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9195644
電子資源
11.線上閱覽_V
電子書
EB
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入