東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

An in-situ investigation of the pass...

Mintz, Todd Samuel.

FindBook

Google Book

Amazon

博客來

An in-situ investigation of the passive film on stainless steel and Inconel 600 in high temperature, pressurized, impurity containing water.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	An in-situ investigation of the passive film on stainless steel and Inconel 600 in high temperature, pressurized, impurity containing water./
作者:	Mintz, Todd Samuel.
面頁冊數:	400 p.
附註:	Source: Dissertation Abstracts International, Volume: 65-02, Section: B, page: 0978.
Contained By:	Dissertation Abstracts International65-02B.
標題:	Engineering, Materials Science. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3121616
ISBN:	0496689673

An in-situ investigation of the passive film on stainless steel and Inconel 600 in high temperature, pressurized, impurity containing water.
Mintz, Todd Samuel.

An in-situ investigation of the passive film on stainless steel and Inconel 600 in high temperature, pressurized, impurity containing water. - 400 p.

Source: Dissertation Abstracts International, Volume: 65-02, Section: B, page: 0978.

Thesis (Ph.D.)--University of California, Berkeley, 2003.

An in situ investigation of the films that formed on stainless steel and Inconel 600 at 288°C and 1500psi were performed using Surface Enhanced Raman Spectroscopy (SERS). By examining the changes in the films that formed on these materials, information was obtained about how these films affect the Intergranular Stress Corrosion Cracking (IGSCC) of these two metals. Stainless steel was examined in water with dilute amounts of sulfate added, which is known to enhance IGSCC. It was observed that the addition of sulfates in no way affected the films that formed on the stainless steel. The enhanced susceptibility for IGSCC of stainless steel is due to an increase in the conductivity of the water. The increased conductivity, due to the added sulfate, reduced the potential drop down a crack, so the minimum concentration of oxygen required to cause IGSCC is less than in high purity water. Thus, the sulfate additions led to an enhancement in the IGSCC. Incone1 600 was studied in boron and lithium containing solution at 288°C. The results showed that in the corrosion potential region where IGSCC occurs, an M3O4 oxide enriched in chromium was stable. This suggested that the M3O4 was the deleterious film that enhanced SCC in the Inconel 600. Once the potential was increased above the SCC region, NiO formed, which must counteract the effects of the chromium enriched M3O4. The results from this study suggested that there is a correlation between film formation and SCC susceptibility.

ISBN: 0496689673Subjects--Topical Terms:

1017759
Engineering, Materials Science.

An in-situ investigation of the passive film on stainless steel and Inconel 600 in high temperature, pressurized, impurity containing water.
LDR:02485nmm 2200289 4500 001 1844209
005 20051017073445.5
008 130614s2003 eng d
020 $a 0496689673
035 $a (UnM)AAI3121616
035 $a AAI3121616
040 $a UnM $c UnM
100 1 $a Mintz, Todd Samuel. $3 1932408
245 1 3 $a An in-situ investigation of the passive film on stainless steel and Inconel 600 in high temperature, pressurized, impurity containing water.
300 $a 400 p.
500 $a Source: Dissertation Abstracts International, Volume: 65-02, Section: B, page: 0978.
500 $a Chair: Thomas M. Devine.
502 $a Thesis (Ph.D.)--University of California, Berkeley, 2003.
520 $a An in situ investigation of the films that formed on stainless steel and Inconel 600 at 288°C and 1500psi were performed using Surface Enhanced Raman Spectroscopy (SERS). By examining the changes in the films that formed on these materials, information was obtained about how these films affect the Intergranular Stress Corrosion Cracking (IGSCC) of these two metals. Stainless steel was examined in water with dilute amounts of sulfate added, which is known to enhance IGSCC. It was observed that the addition of sulfates in no way affected the films that formed on the stainless steel. The enhanced susceptibility for IGSCC of stainless steel is due to an increase in the conductivity of the water. The increased conductivity, due to the added sulfate, reduced the potential drop down a crack, so the minimum concentration of oxygen required to cause IGSCC is less than in high purity water. Thus, the sulfate additions led to an enhancement in the IGSCC. Incone1 600 was studied in boron and lithium containing solution at 288°C. The results showed that in the corrosion potential region where IGSCC occurs, an M3O4 oxide enriched in chromium was stable. This suggested that the M3O4 was the deleterious film that enhanced SCC in the Inconel 600. Once the potential was increased above the SCC region, NiO formed, which must counteract the effects of the chromium enriched M3O4. The results from this study suggested that there is a correlation between film formation and SCC susceptibility.
590 $a School code: 0028.
650 4 $a Engineering, Materials Science. $3 1017759
650 4 $a Engineering, Nuclear. $3 1043651
650 4 $a Engineering, Metallurgy. $3 1023648
690 $a 0794
690 $a 0552
690 $a 0743
710 2 0 $a University of California, Berkeley. $3 687832
773 0 $t Dissertation Abstracts International $g 65-02B.
790 1 0 $a Devine, Thomas M., $e advisor
790 $a 0028
791 $a Ph.D.
792 $a 2003
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3121616