東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Fumed oxide-based nanocomposite poly...

Zhou, Jian.

Linked to FindBook

Google Book

Amazon

博客來

Fumed oxide-based nanocomposite polymer electrolytes for rechargeable lithium batteries.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Fumed oxide-based nanocomposite polymer electrolytes for rechargeable lithium batteries./
Author:	Zhou, Jian.
Description:	243 p.
Notes:	Source: Dissertation Abstracts International, Volume: 64-02, Section: B, page: 0847.
Contained By:	Dissertation Abstracts International64-02B.
Subject:	Engineering, Chemical. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3081757
ISBN:	0496296297

Fumed oxide-based nanocomposite polymer electrolytes for rechargeable lithium batteries.
Zhou, Jian.

Fumed oxide-based nanocomposite polymer electrolytes for rechargeable lithium batteries. - 243 p.

Source: Dissertation Abstracts International, Volume: 64-02, Section: B, page: 0847.

Thesis (Ph.D.)--North Carolina State University, 2003.

Rechargeable lithium batteries are promising power sources for portable electronic devices, implantable medical devices, and electric vehicles due to their high-energy density, low self-discharge rate, and environmentally benign materials. However, the high reactivity of lithium metal limits the choice of electrolytes and impedes the commercialization of rechargeable lithium batteries. One way to tackle this problem is to develop electrolytes that are kinetically stable with lithium. Composite polymer electrolytes (CPEs) based on fumed oxides presented in this work are promising candidates for rechargeable lithium batteries.

ISBN: 0496296297Subjects--Topical Terms:

1018531
Engineering, Chemical.

Fumed oxide-based nanocomposite polymer electrolytes for rechargeable lithium batteries.
LDR:03343nmm 2200289 4500 001 1837226
005 20050428085945.5
008 130614s2003 eng d
020 $a 0496296297
035 $a (UnM)AAI3081757
035 $a AAI3081757
040 $a UnM $c UnM
100 1 $a Zhou, Jian. $3 1907815
245 1 0 $a Fumed oxide-based nanocomposite polymer electrolytes for rechargeable lithium batteries.
300 $a 243 p.
500 $a Source: Dissertation Abstracts International, Volume: 64-02, Section: B, page: 0847.
500 $a Chair: Peter S. Fedkiw.
502 $a Thesis (Ph.D.)--North Carolina State University, 2003.
520 $a Rechargeable lithium batteries are promising power sources for portable electronic devices, implantable medical devices, and electric vehicles due to their high-energy density, low self-discharge rate, and environmentally benign materials. However, the high reactivity of lithium metal limits the choice of electrolytes and impedes the commercialization of rechargeable lithium batteries. One way to tackle this problem is to develop electrolytes that are kinetically stable with lithium. Composite polymer electrolytes (CPEs) based on fumed oxides presented in this work are promising candidates for rechargeable lithium batteries.
520 $a These CPEs typically consist of a low molecular weight methyl-ended poly(ethylene oxide) (PEO) oligomer + lithium bis(trifluromethylsulfonyl)imide [LiN(CF 3SO2)2] (LiTFSI) + fumed oxides (fumed silica, alumina, titania, or nixed fumed silica/alumina). Electrochemical impedance spectroscopy (EIS), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy were employed to study Li transport of CPEs. Ionic conductivity is affected by fillers but does not vary significantly with filler type or surface chemistry. Inert fillers increase conductivity at temperatures below the melting point (Tm) of the electrolyte but decreases conductivity at temperatures above. Our rheological results show that electrolyte elasticity is increased upon addition of fillers and the extent of increase varies greatly with filler type: some effect physical gels while others produce suspensions, depending on the strength of interactions between surface groups of fillers. In addition, the interfacial stability between electrolyte and lithium metal is enhanced upon addition of fillers, as evidenced by the lower interfacial resistance at open-circuit, lower Li/Li cell potential, and less cell polarization during Li/Li cell cycling than those of the baseline liquid electrolyte. The lithium full-cell (Li + metal oxide cathode) cycling results also show improved cell capacity and capacity retention of composite electrolytes in comparison to the baseline liquid electrolytes.
520 $a In summary, our composite electrolytes are promising candidates for lithium battery applications with high room-temperature conductivity, good mechanical strength, stable interface between lithium metal and electrolytes, and reasonable capacity and capacity retention with optimized cathode compositions.
590 $a School code: 0155.
650 4 $a Engineering, Chemical. $3 1018531
690 $a 0542
710 2 0 $a North Carolina State University. $3 1018772
773 0 $t Dissertation Abstracts International $g 64-02B.
790 1 0 $a Fedkiw, Peter S., $e advisor
790 $a 0155
791 $a Ph.D.
792 $a 2003
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3081757