東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Design and control of a 6 DOF biped ...

Gu, Fuhai.

FindBook

Google Book

Amazon

博客來

Design and control of a 6 DOF biped robot.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Design and control of a 6 DOF biped robot./
作者:	Gu, Fuhai.
面頁冊數:	96 p.
附註:	Source: Masters Abstracts International, Volume: 45-03, page: 1662.
Contained By:	Masters Abstracts International45-03.
標題:	Engineering, Mechanical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=MR21511
ISBN:	9780494215111

Design and control of a 6 DOF biped robot.
Gu, Fuhai.

Design and control of a 6 DOF biped robot. - 96 p.

Source: Masters Abstracts International, Volume: 45-03, page: 1662.

Thesis (M.Sc.Eng.)--Lakehead University (Canada), 2006.

This thesis is composed of the following five parts: construction of a 6 Degrees of Freedom (DOF) biped robot, control system design, analysis of forward kinematics and inverse kinematics, walking pattern planning, and PID control implementation.

ISBN: 9780494215111Subjects--Topical Terms:

783786
Engineering, Mechanical.

Design and control of a 6 DOF biped robot.
LDR:02745nmm 2200313 4500 001 1833330
005 20071001080802.5
008 130610s2006 eng d
020 $a 9780494215111
035 $a (UMI)AAIMR21511
035 $a AAIMR21511
040 $a UMI $c UMI
100 1 $a Gu, Fuhai. $3 1922035
245 1 0 $a Design and control of a 6 DOF biped robot.
300 $a 96 p.
500 $a Source: Masters Abstracts International, Volume: 45-03, page: 1662.
502 $a Thesis (M.Sc.Eng.)--Lakehead University (Canada), 2006.
520 $a This thesis is composed of the following five parts: construction of a 6 Degrees of Freedom (DOF) biped robot, control system design, analysis of forward kinematics and inverse kinematics, walking pattern planning, and PID control implementation.
520 $a The 6 DOF biped robot is built with aluminum plates, aluminum angles, wood, and rubber materials. It has two legs, two feet, and one trunk, each leg having three joints: hip, knee, and ankle. All joints are actuated by gear head DC motors with built-in encoders.
520 $a A microcontroller-and-PC-computer-based control system is designed for the biped robot. The control system consists of actuators, sensors, controllers, and a PC computer. The actuators are the gear head DC motors with H-bridge circuits as drivers and the sensors are incremental encoders built in the DC motors. The controllers used are two microcontrollers, one for each leg. The microprocessors read and process joint angle measurements from the encoders and then transmit them to the PC computer. At the same time, the microcontrollers receive control signals from the PC computer and transfer them to the H-bridge circuits to control the robot joints. Data transfer between the microcontrollers and the PC computer is implemented by two RS232 serial communication channels. A control algorithm and walking pattern planning are carried out on the PC computer.
520 $a Both forward kinematics and inverse kinematics are analyzed based on the D-H representation for the biped robot.
520 $a Foot trajectories and hip trajectory are calculated by using the 3rd order spline interpolation method. Desired trajectories for joint angles are determined by the inverse kinematics. Simulation is performed to demonstrate the walking pattern.
520 $a PID controllers are designed for controlling the biped robot to walk according to the designed walking pattern. The proposed PID controllers are implemented on the biped robot.
590 $a School code: 1099.
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Engineering, Robotics. $3 1018454
690 $a 0548
690 $a 0771
710 2 0 $a Lakehead University (Canada). $3 1018578
773 0 $t Masters Abstracts International $g 45-03.
790 $a 1099
791 $a M.Sc.Eng.
792 $a 2006
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=MR21511