東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Particle resuspension from surfaces.

Phares, Denis Joseph.

FindBook

Google Book

Amazon

博客來

Particle resuspension from surfaces.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Particle resuspension from surfaces./
作者:	Phares, Denis Joseph.
面頁冊數:	302 p.
附註:	Source: Dissertation Abstracts International, Volume: 60-05, Section: B, page: 2311.
Contained By:	Dissertation Abstracts International60-05B.
標題:	Applied Mechanics. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9930391
ISBN:	9780599303980

Particle resuspension from surfaces.
Phares, Denis Joseph.

Particle resuspension from surfaces. - 302 p.

Source: Dissertation Abstracts International, Volume: 60-05, Section: B, page: 2311.

Thesis (Ph.D.)--California Institute of Technology, 1999.

A series of experiments were performed in order to investigate how fine particles are resuspended from a surface once they are adhered to the surface through van der Waals interactions. Model spherical particles were generated, deposited on well-characterized substrates, and exposed to various types of forces. Impulsive forces were applied to the particles using impacting particles and impinging shock waves, and steady shearing forces were applied by impinging gas jets and a laminar channel flow. In each case, the threshold conditions to resuspension were determined by optically monitoring particle removal from the substrate. Particles of various size and material properties were considered. Resuspension thresholds were reproducible and unambiguous in the model experiments.

ISBN: 9780599303980Subjects--Topical Terms:

1018410
Applied Mechanics.

Particle resuspension from surfaces.
LDR:03380nmm 2200325 4500 001 1832480
005 20070807072007.5
008 130610s1999 eng d
020 $a 9780599303980
035 $a (UMI)AAI9930391
035 $a AAI9930391
040 $a UMI $c UMI
100 1 $a Phares, Denis Joseph. $3 1921206
245 1 0 $a Particle resuspension from surfaces.
300 $a 302 p.
500 $a Source: Dissertation Abstracts International, Volume: 60-05, Section: B, page: 2311.
500 $a Adviser: Richard Flagan.
502 $a Thesis (Ph.D.)--California Institute of Technology, 1999.
520 $a A series of experiments were performed in order to investigate how fine particles are resuspended from a surface once they are adhered to the surface through van der Waals interactions. Model spherical particles were generated, deposited on well-characterized substrates, and exposed to various types of forces. Impulsive forces were applied to the particles using impacting particles and impinging shock waves, and steady shearing forces were applied by impinging gas jets and a laminar channel flow. In each case, the threshold conditions to resuspension were determined by optically monitoring particle removal from the substrate. Particles of various size and material properties were considered. Resuspension thresholds were reproducible and unambiguous in the model experiments.
520 $a The threshold to resuspension of the model spheres exposed to impinging gas jets was evidenced by abrupt changes in removal efficiency at specific locations. An analytical method to solve the flow field produced by an impinging jet was developed in order to calculate the shear stress experienced by the particles at the threshold locations. An inviscid model of normal jet impingement provided the free stream conditions for the ensuing boundary layer analysis. Calculated shear stress distributions using the model agree with previous measurements.
520 $a Theoretical descriptions of the resuspension mechanisms were inferred from the observed resuspension thresholds. Such an undertaking involves the combination of existing equilibrium adhesion models and the kinetics of aerodynamic or particle collisional interactions. Resuspension models based on equilibrium adhesion theories did not accurately describe the observed size dependence of threshold applied shear stress, or the effect on resuspension of force duration. A kinetic model was developed to qualitatively describe these observed trends.
520 $a The particle removal techniques were applied to a study of particle sampling from explosive fingerprint transfer deposits and fingerprint simulations. A crude sampling system consisting of an impinging gas jet and a suction tube/filter assembly was calibrated with model composite spheres made from a mixture of polystyrene and 2,4,6-trinitrotoluene. Observed removal and collection efficiencies were related to the results of the model experiments. It was found that calibrated sampling systems could be used effectively to test the accuracy of fingerprint simulations.
590 $a School code: 0037.
650 4 $a Applied Mechanics. $3 1018410
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Engineering, Environmental. $3 783782
690 $a 0346
690 $a 0548
690 $a 0775
710 2 0 $a California Institute of Technology. $3 726902
773 0 $t Dissertation Abstracts International $g 60-05B.
790 1 0 $a Flagan, Richard, $e advisor
790 $a 0037
791 $a Ph.D.
792 $a 1999
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9930391