東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Controlling the velocity and azimuth...

Gupta, Deepak.

FindBook

Google Book

Amazon

博客來

Controlling the velocity and azimuth of a mobile robot using fuzzy logic.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Controlling the velocity and azimuth of a mobile robot using fuzzy logic./
作者:	Gupta, Deepak.
面頁冊數:	48 p.
附註:	Source: Masters Abstracts International, Volume: 44-01, page: 0468.
Contained By:	Masters Abstracts International44-01.
標題:	Engineering, Electronics and Electrical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1427313
ISBN:	9780542181245

Controlling the velocity and azimuth of a mobile robot using fuzzy logic.
Gupta, Deepak.

Controlling the velocity and azimuth of a mobile robot using fuzzy logic. - 48 p.

Source: Masters Abstracts International, Volume: 44-01, page: 0468.

Thesis (M.S.)--Texas A&M University - Kingsville, 2005.

An effort was made to investigate and control the velocity and azimuth of a robot (a) using a fuzzy logic controller along with a PID controller, and (b) the fuzzy logic controller alone, and comparing the results. One of the primary reasons for examining the results of the two controllers was to find out the better method to control the motion of robots. A physical, and corresponding theoretical, model for the motion of a two-wheel mobile robot was considered. The computer implementation was based on Matlab/Simulink, with the equations of motion for the mobile robot being used to build a simulink representation of the system. The response of the mobile robot with a PID controller along with a fuzzy logic controller was studied first, and then a fuzzy logic controller was used alone in the desired robotic system. The system was studied for different desired motions, and it was found that the fuzzy logic controller with the PID controller works better than the fuzzy logic controller alone, for most of the investigated conditions. Firstly, a sinusoidal input, and later, a ramp input was given to the system, and in both cases, a considerable improvement was found in the output response when a fuzzy logic controller along with a PID controller was used in the system.

ISBN: 9780542181245Subjects--Topical Terms:

626636
Engineering, Electronics and Electrical.

Controlling the velocity and azimuth of a mobile robot using fuzzy logic.
LDR:02118nmm 2200265 4500 001 1824658
005 20061201083853.5
008 130610s2005 eng d
020 $a 9780542181245
035 $a (UnM)AAI1427313
035 $a AAI1427313
040 $a UnM $c UnM
100 1 $a Gupta, Deepak. $3 1913717
245 1 0 $a Controlling the velocity and azimuth of a mobile robot using fuzzy logic.
300 $a 48 p.
500 $a Source: Masters Abstracts International, Volume: 44-01, page: 0468.
500 $a Chair: Shuhui Li.
502 $a Thesis (M.S.)--Texas A&M University - Kingsville, 2005.
520 $a An effort was made to investigate and control the velocity and azimuth of a robot (a) using a fuzzy logic controller along with a PID controller, and (b) the fuzzy logic controller alone, and comparing the results. One of the primary reasons for examining the results of the two controllers was to find out the better method to control the motion of robots. A physical, and corresponding theoretical, model for the motion of a two-wheel mobile robot was considered. The computer implementation was based on Matlab/Simulink, with the equations of motion for the mobile robot being used to build a simulink representation of the system. The response of the mobile robot with a PID controller along with a fuzzy logic controller was studied first, and then a fuzzy logic controller was used alone in the desired robotic system. The system was studied for different desired motions, and it was found that the fuzzy logic controller with the PID controller works better than the fuzzy logic controller alone, for most of the investigated conditions. Firstly, a sinusoidal input, and later, a ramp input was given to the system, and in both cases, a considerable improvement was found in the output response when a fuzzy logic controller along with a PID controller was used in the system.
590 $a School code: 1187.
650 4 $a Engineering, Electronics and Electrical. $3 626636
690 $a 0544
710 2 0 $a Texas A&M University - Kingsville. $3 1022707
773 0 $t Masters Abstracts International $g 44-01.
790 1 0 $a Li, Shuhui, $e advisor
790 $a 1187
791 $a M.S.
792 $a 2005
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1427313