東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Reducing physical size limits for lo...

Honeycutt, Richard Allison.

FindBook

Google Book

Amazon

博客來

Reducing physical size limits for low-frequency horn loudspeaker systems.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Reducing physical size limits for low-frequency horn loudspeaker systems./
作者:	Honeycutt, Richard Allison.
面頁冊數:	76 p.
附註:	Source: Dissertation Abstracts International, Volume: 66-02, Section: B, page: 0941.
Contained By:	Dissertation Abstracts International66-02B.
標題:	Physics, Acoustics. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3162986
ISBN:	9780496970766

Reducing physical size limits for low-frequency horn loudspeaker systems.
Honeycutt, Richard Allison.

Reducing physical size limits for low-frequency horn loudspeaker systems. - 76 p.

Source: Dissertation Abstracts International, Volume: 66-02, Section: B, page: 0941.

Thesis (Ph.D.)--Union Institute and University, 2005.

From 1881 until the present day, many excellent scholars have studied acoustic horns. This dissertation begins by discussing over eighty results of such study. Next, the methods of modeling horn behavior are examined with an emphasis on the prediction of throat impedance. Because of the time constraints in a product-design environment, in which the results of this study may be used, boundary-element and cascaded-section types of analysis were not considered due to their time intensiveness. Of the methods studied, an analytical process based upon Olson's adaptation of Webster's analysis is selected as the most accurate of the rapid methods, although other good methods exist. Reasons and extent of inaccuracy are discussed. The concept of interleaved horn loading is introduced: it involves using two horns of different parameters, fed by a single driver, with a view toward interleaving and thus smoothing the impedance peaks of the separate horns to produce a smoother response. The validity of the technique is demonstrated both theoretically and practically. Then the reactance annulling technique is explained and tested experimentally. It is found to work well, but the exact parameter values involved are not found to be critical. Finally, the considerations involved in building a practical working system are discussed, and a preliminary working model reviewed. Future work could be directed toward finding the optimum parameter values for the two "parallel horns" whose impedances are to be interleaved, as well as the system parameters that determine these optimum values. Also, further experimental investigation or ported loading of the back air chamber would be useful.

ISBN: 9780496970766Subjects--Topical Terms:

1019086
Physics, Acoustics.

Reducing physical size limits for low-frequency horn loudspeaker systems.
LDR:02592nmm 2200277 4500 001 1823868
005 20061128084401.5
008 130610s2005 eng d
020 $a 9780496970766
035 $a (UnM)AAI3162986
035 $a AAI3162986
040 $a UnM $c UnM
100 1 $a Honeycutt, Richard Allison. $3 1912963
245 1 0 $a Reducing physical size limits for low-frequency horn loudspeaker systems.
300 $a 76 p.
500 $a Source: Dissertation Abstracts International, Volume: 66-02, Section: B, page: 0941.
500 $a Core Faculty: Michael Q. Patton.
502 $a Thesis (Ph.D.)--Union Institute and University, 2005.
520 $a From 1881 until the present day, many excellent scholars have studied acoustic horns. This dissertation begins by discussing over eighty results of such study. Next, the methods of modeling horn behavior are examined with an emphasis on the prediction of throat impedance. Because of the time constraints in a product-design environment, in which the results of this study may be used, boundary-element and cascaded-section types of analysis were not considered due to their time intensiveness. Of the methods studied, an analytical process based upon Olson's adaptation of Webster's analysis is selected as the most accurate of the rapid methods, although other good methods exist. Reasons and extent of inaccuracy are discussed. The concept of interleaved horn loading is introduced: it involves using two horns of different parameters, fed by a single driver, with a view toward interleaving and thus smoothing the impedance peaks of the separate horns to produce a smoother response. The validity of the technique is demonstrated both theoretically and practically. Then the reactance annulling technique is explained and tested experimentally. It is found to work well, but the exact parameter values involved are not found to be critical. Finally, the considerations involved in building a practical working system are discussed, and a preliminary working model reviewed. Future work could be directed toward finding the optimum parameter values for the two "parallel horns" whose impedances are to be interleaved, as well as the system parameters that determine these optimum values. Also, further experimental investigation or ported loading of the back air chamber would be useful.
590 $a School code: 1414.
650 4 $a Physics, Acoustics. $3 1019086
650 4 $a Physics, Electricity and Magnetism. $3 1019535
690 $a 0986
690 $a 0607
710 2 0 $a Union Institute and University. $3 1017694
773 0 $t Dissertation Abstracts International $g 66-02B.
790 1 0 $a Patton, Michael Q., $e advisor
790 $a 1414
791 $a Ph.D.
792 $a 2005
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3162986