東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Formability in computer numerically ...

Young, David.

FindBook

Google Book

Amazon

博客來

Formability in computer numerically controlled single-point incremental forming.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Formability in computer numerically controlled single-point incremental forming./
作者:	Young, David.
面頁冊數:	118 p.
附註:	Source: Masters Abstracts International, Volume: 43-06, page: 2401.
Contained By:	Masters Abstracts International43-06.
標題:	Engineering, Mechanical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=MR01079
ISBN:	0494010797

Formability in computer numerically controlled single-point incremental forming.
Young, David.

Formability in computer numerically controlled single-point incremental forming. - 118 p.

Source: Masters Abstracts International, Volume: 43-06, page: 2401.

Thesis (M.Sc.(Eng))--Queen's University at Kingston (Canada), 2005.

Computer Numerically Controlled Single Point Incremental Forming (CNCSPIF) is the latest progression of a series of sheet metal deformation processes deriving from spinning. Using a common CNC milling machine, non-axisymmetric shapes can be made quickly and cheaply, without need for dedicated dies.

ISBN: 0494010797Subjects--Topical Terms:

783786
Engineering, Mechanical.

Formability in computer numerically controlled single-point incremental forming.
LDR:02377nmm 2200277 4500 001 1815241
005 20060623071201.5
008 130610s2005 eng d
020 $a 0494010797
035 $a (UnM)AAIMR01079
035 $a AAIMR01079
040 $a UnM $c UnM
100 1 $a Young, David. $3 808394
245 1 0 $a Formability in computer numerically controlled single-point incremental forming.
300 $a 118 p.
500 $a Source: Masters Abstracts International, Volume: 43-06, page: 2401.
502 $a Thesis (M.Sc.(Eng))--Queen's University at Kingston (Canada), 2005.
520 $a Computer Numerically Controlled Single Point Incremental Forming (CNCSPIF) is the latest progression of a series of sheet metal deformation processes deriving from spinning. Using a common CNC milling machine, non-axisymmetric shapes can be made quickly and cheaply, without need for dedicated dies.
520 $a This study examines the formability limits of 1.21mm Al 3003-O that was formed into cones and truncated cones with the CNCSPIF process. Both single-pass and two-pass methods were employed, and a forming limit diagram (FLD) was developed for each. The forming limit curve (FLC) obtained from the FLD agreed with published values for CNCSPIF, with a linear trend featuring a -1 slope.
520 $a Wall thickness profiles were also studied, and the effect of varying the pre-form wall angle and offset was quantified for two-pass forming, with a zero offset and a 55-degree wall angle being the most successful for the forming criteria studied here. A limited study into the maximum wall angle achievable for different types of material and thickness was also conducted.
520 $a Two experimental shapes were studied, in partnership with industrial sponsors. An exhaust manifold heat shield was successfully formed with a two-pass CNCSPIF process, using a novel technique for designing the first-pass pre-form. A hemisphere was also successfully formed for use as a weather shield for a solar pyrometer. This geometry was formed by pioneering a CNCSPIF tool path technique that uses a series of radial sweeps as opposed to the traditional helical tool path designs.
590 $a School code: 0283.
650 4 $a Engineering, Mechanical. $3 783786
690 $a 0548
710 2 0 $a Queen's University at Kingston (Canada). $3 1250078
773 0 $t Masters Abstracts International $g 43-06.
790 $a 0283
791 $a M.Sc.(Eng)
792 $a 2005
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=MR01079