東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

THREE-DIMENSIONAL HEAT FLOW IN THE D...

VENKATESWARAN, VISWANATHAN.

FindBook

Google Book

Amazon

博客來

THREE-DIMENSIONAL HEAT FLOW IN THE DIRECT CHILL CASTING OF NON-FERROUS METALS.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	THREE-DIMENSIONAL HEAT FLOW IN THE DIRECT CHILL CASTING OF NON-FERROUS METALS./
作者:	VENKATESWARAN, VISWANATHAN.
附註:	Source: Dissertation Abstracts International, Volume: 42-06, Section: B, page: 2483.
Contained By:	Dissertation Abstracts International42-06B.
標題:	Engineering, Metallurgy. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=NK51817
ISBN:	031503923X

THREE-DIMENSIONAL HEAT FLOW IN THE DIRECT CHILL CASTING OF NON-FERROUS METALS.
VENKATESWARAN, VISWANATHAN.

THREE-DIMENSIONAL HEAT FLOW IN THE DIRECT CHILL CASTING OF NON-FERROUS METALS.

Source: Dissertation Abstracts International, Volume: 42-06, Section: B, page: 2483.

Thesis (Ph.D.)--The University of British Columbia (Canada), 1980.

A three dimensional mathematical model has been developed to study heat flow and solidification in the Direct Chill casting of non-ferrous metals with rectangular as well as irregular cross-sections. The model which is based on an alternating direction, implicit finite-difference numerical method is capable of simulating heat flow both in the steady state and transient part of the casting operation. The validity of the model has been verified by comparing predicted pool profiles and pool depths with industrial measurements.

ISBN: 031503923XSubjects--Topical Terms:

1023648
Engineering, Metallurgy.

THREE-DIMENSIONAL HEAT FLOW IN THE DIRECT CHILL CASTING OF NON-FERROUS METALS.
LDR:02784nmm 2200253 4500 001 1815209
005 20060623071158.5
008 130610s1980 d
020 $a 031503923X
035 $a (UnM)AAINK51817
035 $a AAINK51817
040 $a UnM $c UnM
100 1 $a VENKATESWARAN, VISWANATHAN. $3 1904645
245 1 0 $a THREE-DIMENSIONAL HEAT FLOW IN THE DIRECT CHILL CASTING OF NON-FERROUS METALS.
500 $a Source: Dissertation Abstracts International, Volume: 42-06, Section: B, page: 2483.
502 $a Thesis (Ph.D.)--The University of British Columbia (Canada), 1980.
520 $a A three dimensional mathematical model has been developed to study heat flow and solidification in the Direct Chill casting of non-ferrous metals with rectangular as well as irregular cross-sections. The model which is based on an alternating direction, implicit finite-difference numerical method is capable of simulating heat flow both in the steady state and transient part of the casting operation. The validity of the model has been verified by comparing predicted pool profiles and pool depths with industrial measurements.
520 $a The model has been used to study the importance of heat flows in the various directions, and the limitations of using two-dimensional heat flow models are brought out. This study has shown that a two-dimensional model which neglects heat flow normal to the narrow face can be used to simulate the solidification of slabs with aspect ratios greater than 2.5, cast under conditions of conventional D.C. cooling. Further it was demonstrated that with reduced secondary cooling, a two-dimensional model that neglects axial heat conduction is preferable. Model calculations show that in cooling large sections the unsteady state can occupy around 25% of the total casting cycle.
520 $a The formation of cracks in jumbo ingots of Prime Western Grade zinc has been investigated with the aid of the mathematical model. It has been shown that the cracking is caused by reheating of the surface below the spray cooling zone, if this zone is short and characterized by a high water flux. The surface reheating generates tensile strains at the solidification front where cracking is aided by the presence of lead rich liquid in the inter-dendritic regions. A new spray assembly has been designed which attempts to cool the casting more uniformly from the top of the mould to the bottom of the liquid pool. This new spray system has been tested in-plant for casting Prime Western Grade zinc and results have proven its effectiveness in preventing crack formation.
590 $a School code: 2500.
650 4 $a Engineering, Metallurgy. $3 1023648
690 $a 0743
710 2 0 $a The University of British Columbia (Canada). $3 626643
773 0 $t Dissertation Abstracts International $g 42-06B.
790 $a 2500
791 $a Ph.D.
792 $a 1980
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=NK51817