東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Fabrication, high-strain-rate consti...

Zhang, Haitao.

FindBook

Google Book

Amazon

博客來

Fabrication, high-strain-rate constitutive behavior, and dynamic failure of MMCs.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Fabrication, high-strain-rate constitutive behavior, and dynamic failure of MMCs./
作者:	Zhang, Haitao.
面頁冊數:	206 p.
附註:	Source: Dissertation Abstracts International, Volume: 66-04, Section: B, page: 2282.
Contained By:	Dissertation Abstracts International66-04B.
標題:	Engineering, Mechanical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3172735
ISBN:	0542107031

Fabrication, high-strain-rate constitutive behavior, and dynamic failure of MMCs.
Zhang, Haitao.

Fabrication, high-strain-rate constitutive behavior, and dynamic failure of MMCs. - 206 p.

Source: Dissertation Abstracts International, Volume: 66-04, Section: B, page: 2282.

Thesis (Ph.D.)--The Johns Hopkins University, 2005.

Particulate reinforced metal-matrix composites have been used in conditions involving high strain rate loadings. In this work, an approach that includes experimental characterization, numerical simulation, and theoretical modeling, has been adopted to study the high strain rate constitutive behavior and dynamic failure of metal-matrix composites (MMCs).

ISBN: 0542107031Subjects--Topical Terms:

783786
Engineering, Mechanical.

Fabrication, high-strain-rate constitutive behavior, and dynamic failure of MMCs.
LDR:03461nmm 2200313 4500 001 1814723
005 20060719075911.5
008 130610s2005 eng d
020 $a 0542107031
035 $a (UnM)AAI3172735
035 $a AAI3172735
040 $a UnM $c UnM
100 1 $a Zhang, Haitao. $3 1297284
245 1 0 $a Fabrication, high-strain-rate constitutive behavior, and dynamic failure of MMCs.
300 $a 206 p.
500 $a Source: Dissertation Abstracts International, Volume: 66-04, Section: B, page: 2282.
500 $a Adviser: Kaliat T. Ramesh.
502 $a Thesis (Ph.D.)--The Johns Hopkins University, 2005.
520 $a Particulate reinforced metal-matrix composites have been used in conditions involving high strain rate loadings. In this work, an approach that includes experimental characterization, numerical simulation, and theoretical modeling, has been adopted to study the high strain rate constitutive behavior and dynamic failure of metal-matrix composites (MMCs).
520 $a Aluminum 6092/(B4C)p metal-matrix composite systems fabricated by two different powder consolidation routes have been fabricated and tested over a wide range of strain rates in compression (10-4 &sim; 104 s-1) and tension (10 -4 &sim; 2 x 102 s-1). Comparisons of the constitutive behaviors are made between the composites and the unreinforced matrix materials, between compression and tension, and between low strain rates and high strain rates. Optical microscopy, SEM and TEM are used to characterize the microstructure, quasi-static and dynamic failure, and Al/(B4C)p interface. The strength of these MMCs increases with increasing volume fraction of particulate reinforcement. The fabrication route affects the strength of the matrix material, as reflected in the microstructure, and this effect carries on into the corresponding composites. The composites show significant strain rate dependence as seen in the unreinforced matrix materials. Asymmetric constitutive stress-strain behavior is observed in tension and in compression. Interface debonding plays a significant role in the dynamic failure of the MMCs.
520 $a Numerical analysis of the rate-dependent mechanical behavior of MMCs is conducted using a finite element framework where the reinforcement-matrix interface is considered imperfect and breakable according to a cohesive law. The consequences of interface failure on the overall constitutive behavior are discussed in conjunction with the influences of reinforcement volume fraction, particle shape, and aspect ratio. This numerical model captures the observed constitutive asymmetry of MMCs.
520 $a Finally, a multi-axial constitutive model for plastic deformation of MMCs is constructed by using the Mises-Schleicher criterion. The stress-strain asymmetric responses of composites under uniaxial tension and compression are used as the input of this model. A decomposed flow rule is used to determine the evolution of deviatoric and volumetric strain respectively. This analytical model is capable of predicting the pressure-dependent constitutive behavior of MMCs under various multi-axial loadings, and is evaluated with respect to torsion data.
590 $a School code: 0098.
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Applied Mechanics. $3 1018410
690 $a 0548
690 $a 0346
710 2 0 $a The Johns Hopkins University. $3 1017431
773 0 $t Dissertation Abstracts International $g 66-04B.
790 1 0 $a Ramesh, Kaliat T., $e advisor
790 $a 0098
791 $a Ph.D.
792 $a 2005
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3172735