東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Finite element simulation of machini...

Joshi, Dhananjay.

FindBook

Google Book

Amazon

博客來

Finite element simulation of machining a nickel-based superalloy: Inconel 718.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Finite element simulation of machining a nickel-based superalloy: Inconel 718./
作者:	Joshi, Dhananjay.
面頁冊數:	128 p.
附註:	Source: Masters Abstracts International, Volume: 43-05, page: 1797.
Contained By:	Masters Abstracts International43-05.
標題:	Engineering, Mechanical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1430999
ISBN:	0542026767

Finite element simulation of machining a nickel-based superalloy: Inconel 718.
Joshi, Dhananjay.

Finite element simulation of machining a nickel-based superalloy: Inconel 718. - 128 p.

Source: Masters Abstracts International, Volume: 43-05, page: 1797.

Thesis (M.S.)--Oklahoma State University, 2005.

Scope and methodology of study. Inconel 718 is one of the difficult-to-machine materials and is mainly used for aerospace applications. Cutting speed in machining Inconel 718 is limited by shear localization observed at cutting speed above 61 m/min. Adiabatic shear failure is considered as root cause for chip segmentation. Johnson-Cook material model is used to represent strain, strain rate, and temperature dependence of strength of Inconel 718. Recht's criterion for catastrophic thermo-plastic shear failure is applied to study shear instability in machining. A commercial finite element software with 2-dimensional explicit code and Lagrangian formulation (AdvantEdge) is used for finite element simulations. A user subroutine is developed to incorporate Johnson-Cook material model and Recht's failure criterion in the main code.

ISBN: 0542026767Subjects--Topical Terms:

783786
Engineering, Mechanical.

Finite element simulation of machining a nickel-based superalloy: Inconel 718.
LDR:02341nmm 2200289 4500 001 1814025
005 20060503082231.5
008 130610s2005 eng d
020 $a 0542026767
035 $a (UnM)AAI1430999
035 $a AAI1430999
040 $a UnM $c UnM
100 1 $a Joshi, Dhananjay. $3 1903506
245 1 0 $a Finite element simulation of machining a nickel-based superalloy: Inconel 718.
300 $a 128 p.
500 $a Source: Masters Abstracts International, Volume: 43-05, page: 1797.
500 $a Adviser: Ranga Komanduri.
502 $a Thesis (M.S.)--Oklahoma State University, 2005.
520 $a Scope and methodology of study. Inconel 718 is one of the difficult-to-machine materials and is mainly used for aerospace applications. Cutting speed in machining Inconel 718 is limited by shear localization observed at cutting speed above 61 m/min. Adiabatic shear failure is considered as root cause for chip segmentation. Johnson-Cook material model is used to represent strain, strain rate, and temperature dependence of strength of Inconel 718. Recht's criterion for catastrophic thermo-plastic shear failure is applied to study shear instability in machining. A commercial finite element software with 2-dimensional explicit code and Lagrangian formulation (AdvantEdge) is used for finite element simulations. A user subroutine is developed to incorporate Johnson-Cook material model and Recht's failure criterion in the main code.
520 $a Findings and conclusions. Finite element simulations are run for a range of cutting speeds from 30.5 to 183.5 m/min. Machining is analyzed at various rake angles (-30° to 45°) and feed rates (0.25--1.0 mm/rev). Results of the simulations are compared with machining test data and are found in close confirmation. Chip formation mechanism is found to be in confirmation with experimental observations reported in the literature. Effects of machining conditions on cutting and thrust forces, shear zone and tool rake face temperatures, and equivalent plastic strain in primary and secondary shear zones are reported.
590 $a School code: 0664.
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Engineering, Metallurgy. $3 1023648
690 $a 0548
690 $a 0743
710 2 0 $a Oklahoma State University. $3 626630
773 0 $t Masters Abstracts International $g 43-05.
790 1 0 $a Komanduri, Ranga, $e advisor
790 $a 0664
791 $a M.S.
792 $a 2005
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1430999