東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Mechanical basis of x-ray optics opt...

Li, Yaming.

FindBook

Google Book

Amazon

博客來

Mechanical basis of x-ray optics optimal design.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Mechanical basis of x-ray optics optimal design./
作者:	Li, Yaming.
面頁冊數:	162 p.
附註:	Source: Dissertation Abstracts International, Volume: 66-04, Section: B, page: 2274.
Contained By:	Dissertation Abstracts International66-04B.
標題:	Engineering, Mechanical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3171995
ISBN:	0542090961

Mechanical basis of x-ray optics optimal design.
Li, Yaming.

Mechanical basis of x-ray optics optimal design. - 162 p.

Source: Dissertation Abstracts International, Volume: 66-04, Section: B, page: 2274.

Thesis (Ph.D.)--Illinois Institute of Technology, 2005.

Synchrotron x-ray optics, such as mirrors and monochromators, are used to reflect, focus, or spectrally filter x-ray beams. The effective delivery and utilization of x-ray beams rely on the quality and performance of these optics. One of the key issues affecting optimal performance is the deviation from ideal shape of the optical surfaces. Such deviation can be due to limitations in manufacturing, but, more often than not, they result from thermal and/or mechanical forces on the substrate. Thus, understanding the deformation and the methods used to minimize undesired deformation can ensure acceptable optical performance. This dissertation addresses rigorous analysis and design optimization of optical substrates subjected to thermal and/or mechanical loads.

ISBN: 0542090961Subjects--Topical Terms:

783786
Engineering, Mechanical.

Mechanical basis of x-ray optics optimal design.
LDR:03321nmm 2200313 4500 001 1813684
005 20060503132220.5
008 130610s2005 eng d
020 $a 0542090961
035 $a (UnM)AAI3171995
035 $a AAI3171995
040 $a UnM $c UnM
100 1 $a Li, Yaming. $3 1903177
245 1 0 $a Mechanical basis of x-ray optics optimal design.
300 $a 162 p.
500 $a Source: Dissertation Abstracts International, Volume: 66-04, Section: B, page: 2274.
500 $a Adviser: Sudhakar Nair.
502 $a Thesis (Ph.D.)--Illinois Institute of Technology, 2005.
520 $a Synchrotron x-ray optics, such as mirrors and monochromators, are used to reflect, focus, or spectrally filter x-ray beams. The effective delivery and utilization of x-ray beams rely on the quality and performance of these optics. One of the key issues affecting optimal performance is the deviation from ideal shape of the optical surfaces. Such deviation can be due to limitations in manufacturing, but, more often than not, they result from thermal and/or mechanical forces on the substrate. Thus, understanding the deformation and the methods used to minimize undesired deformation can ensure acceptable optical performance. This dissertation addresses rigorous analysis and design optimization of optical substrates subjected to thermal and/or mechanical loads.
520 $a An optical substrate may receive up to several kW of thermal load from an incident beam. Part of the heat is absorbed by the substrate, and the rest is reflected. To remove the absorbed heat, substrates are cooled either internally or externally. In either case, the resulting temperature profile in the substrate produces thermal deformation, which misdirects the reflected x-ray beam. This undesirable thermal deformation can be minimized by optimal design of the substrate and its cooling. A theoretical formulation of how optimal contact cooling can minimize thermal deformation is developed. Numerical computations are conducted to verify the analytical results. Design optimization is achieved by examining cooling and substrate geometry configurations.
520 $a An optical substrate may also be mechanically bent into a concave shape to focus a divergent incident x-ray beam. The desired shape could be cylindrical or elliptical. But, due to Poisson's effect, anticlastic bending occurs in the opposite direction. As a result, the substrate is bent into a saddle shape. Thus, when an incident x-ray beam is focused in one direction, it expands in the orthogonal direction. An optimal design to minimize anticlastic bending is important. Furthermore, in crystalline optical substrates, bending depends on crystal planes and cut orientation. Crystal anisotropy and its effects on the deformation of bendable optics are also described in this dissertation. Analytical, numerical and experimental results are provided. Crystal anisotropy can be advantageously exploited in the optimal optics design to minimize or maximize anticlastic bending.
590 $a School code: 0091.
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Applied Mechanics. $3 1018410
650 4 $a Physics, Optics. $3 1018756
690 $a 0548
690 $a 0346
690 $a 0752
710 2 0 $a Illinois Institute of Technology. $3 1018749
773 0 $t Dissertation Abstracts International $g 66-04B.
790 1 0 $a Nair, Sudhakar, $e advisor
790 $a 0091
791 $a Ph.D.
792 $a 2005
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3171995