東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Capacitive micromachined ultrasonic ...

Huang, Yongli.

FindBook

Google Book

Amazon

博客來

Capacitive micromachined ultrasonic transducers (CMUTs) built with wafer-bonding technology.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Capacitive micromachined ultrasonic transducers (CMUTs) built with wafer-bonding technology./
作者:	Huang, Yongli.
面頁冊數:	128 p.
附註:	Source: Dissertation Abstracts International, Volume: 66-01, Section: B, page: 0444.
Contained By:	Dissertation Abstracts International66-01B.
標題:	Engineering, Electronics and Electrical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3162354
ISBN:	0496963457

Capacitive micromachined ultrasonic transducers (CMUTs) built with wafer-bonding technology.
Huang, Yongli.

Capacitive micromachined ultrasonic transducers (CMUTs) built with wafer-bonding technology. - 128 p.

Source: Dissertation Abstracts International, Volume: 66-01, Section: B, page: 0444.

Thesis (Ph.D.)--Stanford University, 2005.

This dissertation introduces a new fabrication process developed for the capacitive micromachined ultrasonic transducer (CMUT) using wafer-bonding technology and presents CMUT designs and design optimizations for device performance and reliability improvement.

ISBN: 0496963457Subjects--Topical Terms:

626636
Engineering, Electronics and Electrical.

Capacitive micromachined ultrasonic transducers (CMUTs) built with wafer-bonding technology.
LDR:03155nmm 2200289 4500 001 1813381
005 20060503131718.5
008 130610s2005 eng d
020 $a 0496963457
035 $a (UnM)AAI3162354
035 $a AAI3162354
040 $a UnM $c UnM
100 1 $a Huang, Yongli. $3 1902886
245 1 0 $a Capacitive micromachined ultrasonic transducers (CMUTs) built with wafer-bonding technology.
300 $a 128 p.
500 $a Source: Dissertation Abstracts International, Volume: 66-01, Section: B, page: 0444.
500 $a Adviser: Butrus T. Khuri-Yakub.
502 $a Thesis (Ph.D.)--Stanford University, 2005.
520 $a This dissertation introduces a new fabrication process developed for the capacitive micromachined ultrasonic transducer (CMUT) using wafer-bonding technology and presents CMUT designs and design optimizations for device performance and reliability improvement.
520 $a Ultrasound is used in many applications including medical diagnostics and therapy, underwater imaging, and nondestructive evaluation. Compared to the widely used piezoelectric (PZT) ultrasound transducer, the CMUT has advantages in device fabrication method, bandwidth and operation temperature. It also demonstrates a comparable dynamic performance to PZT transducers. The CMUT is becoming an attractive alternative to the piezoelectric (PZT) ultrasound transducer.
520 $a The new CMUT fabrication process based on wafer bonding technology offers advantages over traditional surface micromachining. First, the number of process steps involved in making a CMUT is greatly reduced by simplifying the cavity forming process, thus improving device yield. Second, this process enables a more accurate control over device parameters and material properties, which improves device reliability. Third, since the membrane and the cavity can be fabricated separately, it provides horizontal and vertical design flexibility, which offers more degrees of freedom for device optimization. All these advantages provide repeatable CMUT fabrication featuring predictable center frequency, bandwidth, collapse voltage and transduction. Using this new technique, CMUTs with operating frequency spanning from 50 kHz to 30 MHz have been fabricated and characterized for both airborne and immersion applications. Another major effort of the dissertation is focused on optimization of one kind of CMUTs that can be used for medical imaging, a promising application area. The pros and cons of conventional (pre-collapse) and non-conventional (collapse) mode operation of CMUTs have been investigated, as well as membrane configuration optimization. A CMUT featuring isolation posts has been invented to solve the device reliability issue. Finally, a CMUT featuring piston shaped membranes demonstrates the comparable output pressure and much better bandwidth, compared with currently used transducers.
590 $a School code: 0212.
650 4 $a Engineering, Electronics and Electrical. $3 626636
690 $a 0544
710 2 0 $a Stanford University. $3 754827
773 0 $t Dissertation Abstracts International $g 66-01B.
790 1 0 $a Khuri-Yakub, Butrus T., $e advisor
790 $a 0212
791 $a Ph.D.
792 $a 2005
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3162354