東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Synthesis and characterization of tr...

Rangaraju, Raghu Raj.

FindBook

Google Book

Amazon

博客來

Synthesis and characterization of transition metal oxide nanotubes for photoelectrochemical hydrogen generation.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Synthesis and characterization of transition metal oxide nanotubes for photoelectrochemical hydrogen generation./
作者:	Rangaraju, Raghu Raj.
面頁冊數:	127 p.
附註:	Source: Masters Abstracts International, Volume: 48-03, page: 1797.
Contained By:	Masters Abstracts International48-03.
標題:	Alternative Energy. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1472972
ISBN:	9781109542226

Synthesis and characterization of transition metal oxide nanotubes for photoelectrochemical hydrogen generation.
Rangaraju, Raghu Raj.

Synthesis and characterization of transition metal oxide nanotubes for photoelectrochemical hydrogen generation. - 127 p.

Source: Masters Abstracts International, Volume: 48-03, page: 1797.

Thesis (M.S.)--University of Nevada, Reno, 2009.

Two different configurations of photo anodes based on anodic iron oxide were investigated for photo electrochemical water oxidation. Self ordered and vertically oriented array of iron oxide nanotubes was obtained by anodization of pure iron substrate in ethylene glycol based electrolyte containing 0.1 M NH4F + 3 vol% water (EGWF solution) at 50 V for 15 minutes. Annealing of the oxide nanotubes in hydrogen environment at 500 °C for 1 h resulted in predominantly hematite phase. The second type of photo anode was obtained by a two-step anodization procedure. This process resulted in a two- layered oxide structure, a top layer of nano-dendrite morphology and a bottom layer of nanoporous morphology. This electrode configuration combined the better photo catalytic properties of the nano-dendritic iron oxide and better electron transportation behavior of vertically oriented nano-channels. Annealing of these double anodized samples in acetylene environment at 550 °C for 10 minutes resulted in a mixture of maghemite and hematite phases. Photo current densities of 0.74 mA/cm2 at 0.2 VAg/AgCl and 1.8 mA/cm 2 at 0.5 VAg/AgCl were obtained under AM 1.5 illumination in 1 M KOH solution. The double anodized samples showed high photo conductivity and more negative flat band potential (-0.8 VAg/AgCl), which are the properties required for promising photo anode materials. Apart from the above work, mild steel which is 10 times less the cost of Ti is also being tested for its photoelectrochemical properties. TiO2 nanotubes synthesized and annealed in different conditions are compared for their quantum efficiency is also carried out in this work. Quantum efficiency measurements gives more reliable and photocurrent data towards photoelectrochemical applications.

ISBN: 9781109542226Subjects--Topical Terms:

1035473
Alternative Energy.

Synthesis and characterization of transition metal oxide nanotubes for photoelectrochemical hydrogen generation.
LDR:02828nam 2200325 4500 001 1400273
005 20111005095643.5
008 130515s2009 ||||||||||||||||| ||eng d
020 $a 9781109542226
035 $a (UMI)AAI1472972
035 $a AAI1472972
040 $a UMI $c UMI
100 1 $a Rangaraju, Raghu Raj. $3 1679308
245 1 0 $a Synthesis and characterization of transition metal oxide nanotubes for photoelectrochemical hydrogen generation.
300 $a 127 p.
500 $a Source: Masters Abstracts International, Volume: 48-03, page: 1797.
500 $a Adviser: Manoranjan Misra.
502 $a Thesis (M.S.)--University of Nevada, Reno, 2009.
520 $a Two different configurations of photo anodes based on anodic iron oxide were investigated for photo electrochemical water oxidation. Self ordered and vertically oriented array of iron oxide nanotubes was obtained by anodization of pure iron substrate in ethylene glycol based electrolyte containing 0.1 M NH4F + 3 vol% water (EGWF solution) at 50 V for 15 minutes. Annealing of the oxide nanotubes in hydrogen environment at 500 °C for 1 h resulted in predominantly hematite phase. The second type of photo anode was obtained by a two-step anodization procedure. This process resulted in a two- layered oxide structure, a top layer of nano-dendrite morphology and a bottom layer of nanoporous morphology. This electrode configuration combined the better photo catalytic properties of the nano-dendritic iron oxide and better electron transportation behavior of vertically oriented nano-channels. Annealing of these double anodized samples in acetylene environment at 550 °C for 10 minutes resulted in a mixture of maghemite and hematite phases. Photo current densities of 0.74 mA/cm2 at 0.2 VAg/AgCl and 1.8 mA/cm 2 at 0.5 VAg/AgCl were obtained under AM 1.5 illumination in 1 M KOH solution. The double anodized samples showed high photo conductivity and more negative flat band potential (-0.8 VAg/AgCl), which are the properties required for promising photo anode materials. Apart from the above work, mild steel which is 10 times less the cost of Ti is also being tested for its photoelectrochemical properties. TiO2 nanotubes synthesized and annealed in different conditions are compared for their quantum efficiency is also carried out in this work. Quantum efficiency measurements gives more reliable and photocurrent data towards photoelectrochemical applications.
590 $a School code: 0139.
650 4 $a Alternative Energy. $3 1035473
650 4 $a Nanoscience. $3 587832
650 4 $a Engineering, Metallurgy. $3 1023648
650 4 $a Engineering, Materials Science. $3 1017759
690 $a 0363
690 $a 0565
690 $a 0743
690 $a 0794
710 2 $a University of Nevada, Reno. $b Metallurgical and Materials Engineering. $3 1679309
773 0 $t Masters Abstracts International $g 48-03.
790 1 0 $a Misra, Manoranjan, $e advisor
790 1 0 $a Raja, Krishnan S. $e committee member
790 1 0 $a Kim, Kwang J. $e committee member
790 $a 0139
791 $a M.S.
792 $a 2009
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1472972