東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Microfabrication of disposable micro...

Mair, Dieudonne Anthony.

FindBook

Google Book

Amazon

博客來

Microfabrication of disposable microfluidic devices featuring porous polymer monoliths for on-chip electrochromatography.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Microfabrication of disposable microfluidic devices featuring porous polymer monoliths for on-chip electrochromatography./
作者:	Mair, Dieudonne Anthony.
面頁冊數:	113 p.
附註:	Adviser: Jean M. J. Frechet.
Contained By:	Dissertation Abstracts International68-08B.
標題:	Chemistry, Analytical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3275508
ISBN:	9780549170495

Microfabrication of disposable microfluidic devices featuring porous polymer monoliths for on-chip electrochromatography.
Mair, Dieudonne Anthony.

Microfabrication of disposable microfluidic devices featuring porous polymer monoliths for on-chip electrochromatography. - 113 p.

Adviser: Jean M. J. Frechet.

Thesis (Ph.D.)--University of California, Berkeley, 2007.

A plastic injection molding process was developed for rapid, high-volume production of plastic microfluidic chips featuring a novel integrated fluidic port. The microfluidic channels are defined by a robust mold insert that is reversibly loaded onto the mold base. This solid metal mold insert was microfabricated by electrochemically depositing nickel in the open areas of a negative-tone, thick photoresist defined using contact photolithography. Chips bonded by conventional thermal lamination and a novel solvent vapor process were qualitatively compared by microscopy and quantitatively tested for bond strength by burst pressure measurement. Following device fabrication the channels were surface modified by UV-initiated polymerization reactions to create a thin, chemically reactive skin that covalently anchors the stationary phase prepared in the subsequent step. To circumvent the difficulties associated with packing beads in a microfluidic chip, porous polymer, monoliths were patterned directly within the microfluidic chip using an in situ UV-mediated preparation method. The ability to spatially confine monolith to well defined areas of the chip using UV light facilitated the patterning of a column featuring an optical detection window. Device fabrication was completed upon serially photografting the monolith surface with an ionizable monomer for support of electroosmotic flow followed by a hydrophobic monomer to increase the reverse phase retention time.

ISBN: 9780549170495Subjects--Topical Terms:

586156
Chemistry, Analytical.

Microfabrication of disposable microfluidic devices featuring porous polymer monoliths for on-chip electrochromatography.
LDR:02443nam 2200289 a 45 001 946086
005 20110523
008 110523s2007 ||||||||||||||||| ||eng d
020 $a 9780549170495
035 $a (UMI)AAI3275508
035 $a AAI3275508
040 $a UMI $c UMI
100 1 $a Mair, Dieudonne Anthony. $3 1269496
245 1 0 $a Microfabrication of disposable microfluidic devices featuring porous polymer monoliths for on-chip electrochromatography.
300 $a 113 p.
500 $a Adviser: Jean M. J. Frechet.
500 $a Source: Dissertation Abstracts International, Volume: 68-08, Section: B, page: 5409.
502 $a Thesis (Ph.D.)--University of California, Berkeley, 2007.
520 $a A plastic injection molding process was developed for rapid, high-volume production of plastic microfluidic chips featuring a novel integrated fluidic port. The microfluidic channels are defined by a robust mold insert that is reversibly loaded onto the mold base. This solid metal mold insert was microfabricated by electrochemically depositing nickel in the open areas of a negative-tone, thick photoresist defined using contact photolithography. Chips bonded by conventional thermal lamination and a novel solvent vapor process were qualitatively compared by microscopy and quantitatively tested for bond strength by burst pressure measurement. Following device fabrication the channels were surface modified by UV-initiated polymerization reactions to create a thin, chemically reactive skin that covalently anchors the stationary phase prepared in the subsequent step. To circumvent the difficulties associated with packing beads in a microfluidic chip, porous polymer, monoliths were patterned directly within the microfluidic chip using an in situ UV-mediated preparation method. The ability to spatially confine monolith to well defined areas of the chip using UV light facilitated the patterning of a column featuring an optical detection window. Device fabrication was completed upon serially photografting the monolith surface with an ionizable monomer for support of electroosmotic flow followed by a hydrophobic monomer to increase the reverse phase retention time.
590 $a School code: 0028.
650 4 $a Chemistry, Analytical. $3 586156
650 4 $a Chemistry, Polymer. $3 1018428
650 4 $a Engineering, Chemical. $3 1018531
690 $a 0486
690 $a 0495
690 $a 0542
710 2 $a University of California, Berkeley. $3 687832
773 0 $t Dissertation Abstracts International $g 68-08B.
790 $a 0028
790 1 0 $a Frechet, Jean M. J., $e advisor
791 $a Ph.D.
792 $a 2007
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3275508