東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Development of self-healing polymer ...

Sriram, Suresh Ranganathan.

FindBook

Google Book

Amazon

博客來

Development of self-healing polymer composites and photoinduced ring-opening metathesis polymerization.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Development of self-healing polymer composites and photoinduced ring-opening metathesis polymerization./
作者:	Sriram, Suresh Ranganathan.
面頁冊數:	111 p.
附註:	Adviser: Jeffrey S. Moore.
Contained By:	Dissertation Abstracts International63-02B.
標題:	Chemistry, Organic. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3044231
ISBN:	0493581065

Development of self-healing polymer composites and photoinduced ring-opening metathesis polymerization.
Sriram, Suresh Ranganathan.

Development of self-healing polymer composites and photoinduced ring-opening metathesis polymerization. - 111 p.

Adviser: Jeffrey S. Moore.

Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 2002.

The design and development of “smart-materials” which are capable of assessing their internal damage and perform self-healing is described. Failure of a material occurs by the induction of cracks. Often cracks are formed deep within the structure where detection is difficult and repair is virtually impossible. Once cracks have formed within polymeric materials, the integrity of the structure is compromised. A composite material can be repaired and its lifetime enhanced by relieving stress concentrations surrounding the crack tip.

ISBN: 0493581065Subjects--Topical Terms:

516206
Chemistry, Organic.

Development of self-healing polymer composites and photoinduced ring-opening metathesis polymerization.
LDR:03346nam 2200313 a 45 001 932993
005 20110505
008 110505s2002 eng d
020 $a 0493581065
035 $a (UnM)AAI3044231
035 $a AAI3044231
040 $a UnM $c UnM
100 1 $a Sriram, Suresh Ranganathan. $3 1256733
245 1 0 $a Development of self-healing polymer composites and photoinduced ring-opening metathesis polymerization.
300 $a 111 p.
500 $a Adviser: Jeffrey S. Moore.
500 $a Source: Dissertation Abstracts International, Volume: 63-02, Section: B, page: 0809.
502 $a Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 2002.
520 $a The design and development of “smart-materials” which are capable of assessing their internal damage and perform self-healing is described. Failure of a material occurs by the induction of cracks. Often cracks are formed deep within the structure where detection is difficult and repair is virtually impossible. Once cracks have formed within polymeric materials, the integrity of the structure is compromised. A composite material can be repaired and its lifetime enhanced by relieving stress concentrations surrounding the crack tip.
520 $a This thesis reports the novel development of a structural polymeric material with the ability to self-heal cracks by the application of ring opening metathesis polymerization. Self-healing is accomplished by incorporating a microencapsulated healing agent and a catalytic chemical trigger within an epoxy matrix. When the material is damaged, the microcapsules rupture and release the healing agent into the damaged region through capillary action. As the healing agent contacts the catalyst, polymerization is initiated and the damage is repaired. Ring opening metathesis polymerization (ROMP) has been applied towards the development of a self-healing polymer composite. Grubbs' catalyst is embedded in the matrix as a solid and dicyclopentadiene is employed as the healing agent within the microcapsules. Chemical and micromechanical experiments have been performed that illustrate the ROMP based self-healing concept. Experiments on fracture specimens have yielded as much as 75% recovery of virgin toughness.
520 $a In addition, the development and utility of these easily accessible ruthenium precatalyst, [(<italic>p</italic>-cymene)RuCl<sub>2</sub>]<sub>2</sub> and tricyclohexylphosphine in performing Photoinduced Ring Opening Metathesis Polymerization (PROMP) is demonstrated. Polymerization of norbornene and dicyclopentadiene has been performed, showing the simplicity and ease of this procedure. The resulting poly(norbornene) shows high <italic>trans</italic> content (85%) of the ring opened double bonds. Crosslinked poly(dicyclopentadiene) can be generated at room temperature using 1% wt. of the precatalyst by irradiation of UV light at 254 nm. Initial results in the application of PROMP towards photopatterning and creation of microchannels for potential application in microfluidic devices is described.
590 $a School code: 0090.
650 4 $a Chemistry, Organic. $3 516206
650 4 $a Chemistry, Polymer. $3 1018428
650 4 $a Engineering, Materials Science. $3 1017759
690 $a 0490
690 $a 0495
690 $a 0794
710 2 0 $a University of Illinois at Urbana-Champaign. $3 626646
773 0 $t Dissertation Abstracts International $g 63-02B.
790 $a 0090
790 1 0 $a Moore, Jeffrey S., $e advisor
791 $a Ph.D.
792 $a 2002
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3044231