東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Mechanistic-empirical evaluation of ...

Garg, Navneet.

FindBook

Google Book

Amazon

博客來

Mechanistic-empirical evaluation of the Mn/ROAD low-volume road test sections.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Mechanistic-empirical evaluation of the Mn/ROAD low-volume road test sections./
作者:	Garg, Navneet.
面頁冊數:	404 p.
附註:	Adviser: Marshall R. Thompson.
Contained By:	Dissertation Abstracts International58-10B.
標題:	Engineering, Civil. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9812593
ISBN:	0591633965

Mechanistic-empirical evaluation of the Mn/ROAD low-volume road test sections.
Garg, Navneet.

Mechanistic-empirical evaluation of the Mn/ROAD low-volume road test sections. - 404 p.

Adviser: Marshall R. Thompson.

Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 1997.

The objective of this study was to utilize Illinois Department of Transportation (IDOT) mechanistic-empirical procedures and Mn/ROAD low-volume road (LVR) data and information to verify/refine/modify analysis and design concepts and procedures for LVR flexible pavements. Laboratory test results, field distress measurements, and FWD test data were used to study the effect of granular material quality on pavement performance and deflection response. The results from the rapid shear tests and permanent deformation tests show that the rutting potential of a granular material can be characterized from rapid shear test at 15-psi confining pressure. The rapid shear test results at 15-psi confining pressure reflect the rutting trends observed in the field. There is no significant effect of granular material quality on the conventional flexible pavement deflection response. The field measured pavement responses were compared to the ILLI-PAVE (finite element program) predicted pavement responses. Estimate of pavement responses is fairly accurate in the case of test sections with thick (higher than 5-inch) asphalt concrete (AC) surface. The analyses of field FWD data showed that Area Under Pavement Profile (geometric shape factor of deflection basin) can be used to predict the strains at the bottom of AC layer. The 'Design Time' concept was utilized to consider temperature effects on AC fatigue computations. The analyses showed that the 'Design Time' is primarily effected by AC thickness. The granular layer thickness and subgrade type (sand or cohesive) do not have any effect on 'Design Time'. Effect of subgrade type on pavement response and performance was studied. In the IDOT mechanistic-empirical design procedure, the design criteria for conventional flexible pavements are AC fatigue and subgrade stress ratio (deviator stress/unconfined compressive strength). In the Mn/ROAD LVR test sections, no AC fatigue was observed, and the subgrade stress ratios (0.2-0.4) were in the acceptable range (0.5-0.7). However, some of the conventional flexible test sections experienced severe rutting which was attributed to the granular layer. The pavement granular base layer must possess sufficient shear strength/rutting resistance (for a given asphalt concrete thickness) to minimize rutting within the granular layer.

ISBN: 0591633965Subjects--Topical Terms:

783781
Engineering, Civil.

Mechanistic-empirical evaluation of the Mn/ROAD low-volume road test sections.
LDR:03243nam 2200277 a 45 001 926805
005 20110422
008 110422s1997 eng d
020 $a 0591633965
035 $a (UnM)AAI9812593
035 $a AAI9812593
040 $a UnM $c UnM
100 1 $a Garg, Navneet. $3 1250389
245 1 0 $a Mechanistic-empirical evaluation of the Mn/ROAD low-volume road test sections.
300 $a 404 p.
500 $a Adviser: Marshall R. Thompson.
500 $a Source: Dissertation Abstracts International, Volume: 58-10, Section: B, page: 5527.
502 $a Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 1997.
520 $a The objective of this study was to utilize Illinois Department of Transportation (IDOT) mechanistic-empirical procedures and Mn/ROAD low-volume road (LVR) data and information to verify/refine/modify analysis and design concepts and procedures for LVR flexible pavements. Laboratory test results, field distress measurements, and FWD test data were used to study the effect of granular material quality on pavement performance and deflection response. The results from the rapid shear tests and permanent deformation tests show that the rutting potential of a granular material can be characterized from rapid shear test at 15-psi confining pressure. The rapid shear test results at 15-psi confining pressure reflect the rutting trends observed in the field. There is no significant effect of granular material quality on the conventional flexible pavement deflection response. The field measured pavement responses were compared to the ILLI-PAVE (finite element program) predicted pavement responses. Estimate of pavement responses is fairly accurate in the case of test sections with thick (higher than 5-inch) asphalt concrete (AC) surface. The analyses of field FWD data showed that Area Under Pavement Profile (geometric shape factor of deflection basin) can be used to predict the strains at the bottom of AC layer. The 'Design Time' concept was utilized to consider temperature effects on AC fatigue computations. The analyses showed that the 'Design Time' is primarily effected by AC thickness. The granular layer thickness and subgrade type (sand or cohesive) do not have any effect on 'Design Time'. Effect of subgrade type on pavement response and performance was studied. In the IDOT mechanistic-empirical design procedure, the design criteria for conventional flexible pavements are AC fatigue and subgrade stress ratio (deviator stress/unconfined compressive strength). In the Mn/ROAD LVR test sections, no AC fatigue was observed, and the subgrade stress ratios (0.2-0.4) were in the acceptable range (0.5-0.7). However, some of the conventional flexible test sections experienced severe rutting which was attributed to the granular layer. The pavement granular base layer must possess sufficient shear strength/rutting resistance (for a given asphalt concrete thickness) to minimize rutting within the granular layer.
590 $a School code: 0090.
650 4 $a Engineering, Civil. $3 783781
650 4 $a Geotechnology. $3 1018558
690 $a 0428
690 $a 0543
710 2 0 $a University of Illinois at Urbana-Champaign. $3 626646
773 0 $t Dissertation Abstracts International $g 58-10B.
790 $a 0090
790 1 0 $a Thompson, Marshall R., $e advisor
791 $a Ph.D.
792 $a 1997
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9812593