東華大學圖書館 |

Lectures notes on advanced structured materials.. 2

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Lectures notes on advanced structured materials./ edited by Holm Altenbach ... [et al.].
其他作者:	Altenbach, Holm.
團體作者:	Advanced Structural Materials Seminar
出版者:	Cham :Springer Nature Switzerland : : 2024.,
面頁冊數:	xv, 420 p. :ill., digital ;24 cm.
內容註:	Part A: Postgraduate Lectures -- Berta Pi Savall: Experimental Analysis of Strain and Thermal Behaviour on 3D-Printed Flexible Auxetic Structures -- Caroline Treib: Crack Evaluation of Ozone-Aged Elastomers -- Dominik Hahne: Selective Laser Sintered Pipe Specimen Under Torsional Load: Experimental Investigations and Material Modelling -- Johannes Rottler: The Importance of Heat Conduction and Global Temperature Fields in the Laser Powder Bed Fusion Process -- Julian Klingenbeck: Investigation of the Anisotropic Mechanical Behaviour of Short Carbon Fibre Reinforced Polyamide 6 Fabricated via Fused Filament Fabrication -- Enes Sert: Determination of the Fatigue Behaviour of Laser Powder-Bed Fused AlSi10Mg Specimens using Surface and Heat Treatments -- Yvonne Breitmoser: Sorption of Fuels in Additively Manufactured Thermoplastic Polyurethanes -- Stefan Brenner: Distortion Compensation of Thin-Walled Parts by Pre-Deformation in Powder Bed Fusion with Laser Beam -- Jens Kortsch-Banzhaf: Investigation of the Thermophysical Properties of Porous Steel Components made by Selective Laser Melting -- Johannes Schmid: Analysis of the Heating Behavior and the Strength of Hot Gas Welded Polyamides with 3D Contours Using an Immersing Nozzle System -- Julius Cronau: Simulation of Lattice Structures with Johnson Cook Material and Damage Model -- Lea Strauß: Effect of Residual Stress, Surface Roughness and Porosity on Fatigue Life of PBF-LB AlSi10Mg -- Michael Ascher: Elastoplastic Characterization of a Two-Component Epoxy-Based Structural Adhesive -- Lucas Schraa: Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka Homogenization Method -- Maha Zaghdoudi: Analysis of Heterogeneous Ageing of HNBR O-Rings -- Ondrej Farkas: On the Characterisation and Modelling of the NR-BR Blend Under Harmonic Excitation Considering Self-Heating Effect -- Philippe du Maire: Thermal Katharina Knape: On theWays to Numerically Implement the Two-Time-Scale Approach -- MirnaOsama: Development of Site Calibration Set for Prefixed Wall Transmitters of Environmental Monitoring Systems in Regulated Industries -- Part B: Overview Lectures -- Holm Altenbach: Continuum Mechanics - Material Independent and Dependent Equations -- Andreas Öchsner: Mechanical Behavior of Classical Sandwich Beams -- Leonhard Hitzler: Classical Solidification Structures in Single-Step Metal Additive Manufacturing -- Markus Merkel: Additive Manufacturing as a Key Driver in the Mobility of Tomorrow.
Contained By:	Springer Nature eBook
標題:	Materials - Congresses. -
電子資源:	https://doi.org/10.1007/978-3-031-49043-9
ISBN:	9783031490439

Lectures notes on advanced structured materials.. 2
Lectures notes on advanced structured materials.2[electronic resource] /edited by Holm Altenbach ... [et al.]. - Cham :Springer Nature Switzerland :2024. - xv, 420 p. :ill., digital ;24 cm. - Advanced structured materials,v. 2031869-8441 ;. - Advanced structured materials ;v. 203..

Part A: Postgraduate Lectures -- Berta Pi Savall: Experimental Analysis of Strain and Thermal Behaviour on 3D-Printed Flexible Auxetic Structures -- Caroline Treib: Crack Evaluation of Ozone-Aged Elastomers -- Dominik Hahne: Selective Laser Sintered Pipe Specimen Under Torsional Load: Experimental Investigations and Material Modelling -- Johannes Rottler: The Importance of Heat Conduction and Global Temperature Fields in the Laser Powder Bed Fusion Process -- Julian Klingenbeck: Investigation of the Anisotropic Mechanical Behaviour of Short Carbon Fibre Reinforced Polyamide 6 Fabricated via Fused Filament Fabrication -- Enes Sert: Determination of the Fatigue Behaviour of Laser Powder-Bed Fused AlSi10Mg Specimens using Surface and Heat Treatments -- Yvonne Breitmoser: Sorption of Fuels in Additively Manufactured Thermoplastic Polyurethanes -- Stefan Brenner: Distortion Compensation of Thin-Walled Parts by Pre-Deformation in Powder Bed Fusion with Laser Beam -- Jens Kortsch-Banzhaf: Investigation of the Thermophysical Properties of Porous Steel Components made by Selective Laser Melting -- Johannes Schmid: Analysis of the Heating Behavior and the Strength of Hot Gas Welded Polyamides with 3D Contours Using an Immersing Nozzle System -- Julius Cronau: Simulation of Lattice Structures with Johnson Cook Material and Damage Model -- Lea Strauß: Effect of Residual Stress, Surface Roughness and Porosity on Fatigue Life of PBF-LB AlSi10Mg -- Michael Ascher: Elastoplastic Characterization of a Two-Component Epoxy-Based Structural Adhesive -- Lucas Schraa: Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka Homogenization Method -- Maha Zaghdoudi: Analysis of Heterogeneous Ageing of HNBR O-Rings -- Ondrej Farkas: On the Characterisation and Modelling of the NR-BR Blend Under Harmonic Excitation Considering Self-Heating Effect -- Philippe du Maire: Thermal Katharina Knape: On theWays to Numerically Implement the Two-Time-Scale Approach -- MirnaOsama: Development of Site Calibration Set for Prefixed Wall Transmitters of Environmental Monitoring Systems in Regulated Industries -- Part B: Overview Lectures -- Holm Altenbach: Continuum Mechanics - Material Independent and Dependent Equations -- Andreas Öchsner: Mechanical Behavior of Classical Sandwich Beams -- Leonhard Hitzler: Classical Solidification Structures in Single-Step Metal Additive Manufacturing -- Markus Merkel: Additive Manufacturing as a Key Driver in the Mobility of Tomorrow.

The postgraduate seminar series on advanced structured materials is designed to facilitate teaching and informal discussion in a supportive and friendly environment. The seminar provides a forum for postgraduate students to present their research results and train their presentation and discussion skills. Furthermore, it allows for extensive discussion of current research being conducted in the wider area of advanced structured materials. Doing so, it builds a wider postgraduate community and offers networking opportunities for early career researchers. In addition to focused lectures, the seminar provides specialized teaching/overview lectures from experienced senior academics. The 2023 Postgraduate Seminar entitled "Advanced Structured Materials: Development - Manufacturing - Characterization - Applications" was held from 20th till 24th February 2023 in Barcelona. The presented postgraduate lectures had a strong focus on polymer mechanics, composite materials, and additive manufacturing.

ISBN: 9783031490439

Standard No.: 10.1007/978-3-031-49043-9doiSubjects--Topical Terms:

703235
Materials
--Congresses.

LC Class. No.: TA401.3 / .A38 2023

Dewey Class. No.: 620.11

Lectures notes on advanced structured materials.. 2
LDR:04581nmm a22003375a 4500 001 2370773
003 DE-He213
005 20240319162131.0
006 m d
007 cr nn 008maaau
008 241127s2024 sz s 0 eng d
020 $a 9783031490439 $q (electronic bk.)
020 $a 9783031490422 $q (paper)
024 7 $a 10.1007/978-3-031-49043-9 $2 doi
035 $a 978-3-031-49043-9
040 $a GP $c GP
041 0 $a eng
050 4 $a TA401.3 $b .A38 2023
072 7 $a PHD $2 bicssc
072 7 $a SCI065000 $2 bisacsh
072 7 $a PHD $2 thema
082 0 4 $a 620.11 $2 23
090 $a TA401.3 $b .A244 2023
111 2 $a Advanced Structural Materials Seminar $d (2023 : $c Barcelona, Spain) $3 3716339
245 1 0 $a Lectures notes on advanced structured materials. $n 2 $h [electronic resource] / $c edited by Holm Altenbach ... [et al.].
260 $a Cham : $b Springer Nature Switzerland : $b Imprint: Springer, $c 2024.
300 $a xv, 420 p. : $b ill., digital ; $c 24 cm.
490 1 $a Advanced structured materials, $x 1869-8441 ; $v v. 203
505 0 $a Part A: Postgraduate Lectures -- Berta Pi Savall: Experimental Analysis of Strain and Thermal Behaviour on 3D-Printed Flexible Auxetic Structures -- Caroline Treib: Crack Evaluation of Ozone-Aged Elastomers -- Dominik Hahne: Selective Laser Sintered Pipe Specimen Under Torsional Load: Experimental Investigations and Material Modelling -- Johannes Rottler: The Importance of Heat Conduction and Global Temperature Fields in the Laser Powder Bed Fusion Process -- Julian Klingenbeck: Investigation of the Anisotropic Mechanical Behaviour of Short Carbon Fibre Reinforced Polyamide 6 Fabricated via Fused Filament Fabrication -- Enes Sert: Determination of the Fatigue Behaviour of Laser Powder-Bed Fused AlSi10Mg Specimens using Surface and Heat Treatments -- Yvonne Breitmoser: Sorption of Fuels in Additively Manufactured Thermoplastic Polyurethanes -- Stefan Brenner: Distortion Compensation of Thin-Walled Parts by Pre-Deformation in Powder Bed Fusion with Laser Beam -- Jens Kortsch-Banzhaf: Investigation of the Thermophysical Properties of Porous Steel Components made by Selective Laser Melting -- Johannes Schmid: Analysis of the Heating Behavior and the Strength of Hot Gas Welded Polyamides with 3D Contours Using an Immersing Nozzle System -- Julius Cronau: Simulation of Lattice Structures with Johnson Cook Material and Damage Model -- Lea Strauß: Effect of Residual Stress, Surface Roughness and Porosity on Fatigue Life of PBF-LB AlSi10Mg -- Michael Ascher: Elastoplastic Characterization of a Two-Component Epoxy-Based Structural Adhesive -- Lucas Schraa: Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka Homogenization Method -- Maha Zaghdoudi: Analysis of Heterogeneous Ageing of HNBR O-Rings -- Ondrej Farkas: On the Characterisation and Modelling of the NR-BR Blend Under Harmonic Excitation Considering Self-Heating Effect -- Philippe du Maire: Thermal Katharina Knape: On theWays to Numerically Implement the Two-Time-Scale Approach -- MirnaOsama: Development of Site Calibration Set for Prefixed Wall Transmitters of Environmental Monitoring Systems in Regulated Industries -- Part B: Overview Lectures -- Holm Altenbach: Continuum Mechanics - Material Independent and Dependent Equations -- Andreas Öchsner: Mechanical Behavior of Classical Sandwich Beams -- Leonhard Hitzler: Classical Solidification Structures in Single-Step Metal Additive Manufacturing -- Markus Merkel: Additive Manufacturing as a Key Driver in the Mobility of Tomorrow.
520 $a The postgraduate seminar series on advanced structured materials is designed to facilitate teaching and informal discussion in a supportive and friendly environment. The seminar provides a forum for postgraduate students to present their research results and train their presentation and discussion skills. Furthermore, it allows for extensive discussion of current research being conducted in the wider area of advanced structured materials. Doing so, it builds a wider postgraduate community and offers networking opportunities for early career researchers. In addition to focused lectures, the seminar provides specialized teaching/overview lectures from experienced senior academics. The 2023 Postgraduate Seminar entitled "Advanced Structured Materials: Development - Manufacturing - Characterization - Applications" was held from 20th till 24th February 2023 in Barcelona. The presented postgraduate lectures had a strong focus on polymer mechanics, composite materials, and additive manufacturing.
650 0 $a Materials $x Congresses. $3 703235
650 0 $a Additive manufacturing $v Congresses. $3 3485920
650 1 4 $a Continuum Mechanics. $3 3538810
650 2 4 $a Solid Mechanics. $3 3381524
650 2 4 $a Computational Materials Science. $3 3594455
700 1 $a Altenbach, Holm. $3 1244868
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer Nature eBook
830 0 $a Advanced structured materials ; $v v. 203. $3 3716340
856 4 0 $u https://doi.org/10.1007/978-3-031-49043-9
950 $a Physics and Astronomy (SpringerNature-11651)