東華大學圖書館 |

Challenges in mechanics of biological systems and materials, thermomechanics and infrared imaging, time dependent materials and residual stress. = proceedings of the 2023 Annual Conference & Exposition on Experimental and Applied Mechanics /. Volume 2

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Challenges in mechanics of biological systems and materials, thermomechanics and infrared imaging, time dependent materials and residual stress./ edited by Christian Franck ... [et al.].
其他題名:	proceedings of the 2023 Annual Conference & Exposition on Experimental and Applied Mechanics /
其他作者:	Franck, Christian.
團體作者:	SEM Annual Conference & Exposition on Experimental and Applied Mechanics
出版者:	Cham :Springer Nature Switzerland : : 2024.,
面頁冊數:	vii, 102 p. :ill. (some col.), digital ;24 cm.
內容註:	Chapter 1. Development of PEEK matrix polymer composite and additive manufacturing by pellet extrusion method -- Chapter 2. Parkinsonian Hand Tremor Mitigation with Enhanced Wearable Device -- Chapter 3. Quantitative Measurement of Viscoelastic Properties of Soft Membranes Subjected to Finite Deformations based on Optical Coherence Elastography -- Chapter 4. Open Source Contour Method Analysis for Assessing Residual Stress in Weldments -- Chapter 5. Variation of initial bulk residual stresses in aluminum alloy 7050-T7451 and its effect on distortion of thin-walled structural parts -- Chapter 6. On the Use of iDIC (Integrated Digital Image Correlation) for the Slitting Method -- Chapter 7. A rapid procedure to re-construct S/N curve by using harmonic components of thermal signal -- Chapter 8. Rapid Fatigue Characterisation via Infrared Thermography of AM-CM Composites -- Chapter 9. Condition Assessment by Thermal Emission (CATE) for in situ monitoring of fatigue crack growth -- Chapter 10. Effect of geometrical discontinuities on mode shapes stress maps using infrared thermography -- Chapter 11. Induction thermography: influence of testing parameters for different crack geometry -- Chapter 12. Numerical Simulation of the Heat Dissipation During the Fatigue Test -- Chapter 13. A full experimental characterization of aged Nitrile Butadiene Rubbers (NBR) -- Chapter 14. Characterization of the Effect of Cold Joints and Functional Grading in Stepwise Constructed Tensile Dog Bones with Embedded Digital Image Correlation.
Contained By:	Springer Nature eBook
標題:	Biomedical materials - Congresses. -
電子資源:	https://doi.org/10.1007/978-3-031-50470-9
ISBN:	9783031504709

Challenges in mechanics of biological systems and materials, thermomechanics and infrared imaging, time dependent materials and residual stress. = proceedings of the 2023 Annual Conference & Exposition on Experimental and Applied Mechanics /. Volume 2
Challenges in mechanics of biological systems and materials, thermomechanics and infrared imaging, time dependent materials and residual stress.proceedings of the 2023 Annual Conference & Exposition on Experimental and Applied Mechanics /Volume 2[electronic resource] :edited by Christian Franck ... [et al.]. - Cham :Springer Nature Switzerland :2024. - vii, 102 p. :ill. (some col.), digital ;24 cm. - Conference proceedings of the Society for Experimental Mechanics series,2191-5652. - Conference proceedings of the Society for Experimental Mechanics series..

Chapter 1. Development of PEEK matrix polymer composite and additive manufacturing by pellet extrusion method -- Chapter 2. Parkinsonian Hand Tremor Mitigation with Enhanced Wearable Device -- Chapter 3. Quantitative Measurement of Viscoelastic Properties of Soft Membranes Subjected to Finite Deformations based on Optical Coherence Elastography -- Chapter 4. Open Source Contour Method Analysis for Assessing Residual Stress in Weldments -- Chapter 5. Variation of initial bulk residual stresses in aluminum alloy 7050-T7451 and its effect on distortion of thin-walled structural parts -- Chapter 6. On the Use of iDIC (Integrated Digital Image Correlation) for the Slitting Method -- Chapter 7. A rapid procedure to re-construct S/N curve by using harmonic components of thermal signal -- Chapter 8. Rapid Fatigue Characterisation via Infrared Thermography of AM-CM Composites -- Chapter 9. Condition Assessment by Thermal Emission (CATE) for in situ monitoring of fatigue crack growth -- Chapter 10. Effect of geometrical discontinuities on mode shapes stress maps using infrared thermography -- Chapter 11. Induction thermography: influence of testing parameters for different crack geometry -- Chapter 12. Numerical Simulation of the Heat Dissipation During the Fatigue Test -- Chapter 13. A full experimental characterization of aged Nitrile Butadiene Rubbers (NBR) -- Chapter 14. Characterization of the Effect of Cold Joints and Functional Grading in Stepwise Constructed Tensile Dog Bones with Embedded Digital Image Correlation.

Challenges in Mechanics of Biological Systems and Materials, Thermomechanics and Infrared Imaging, Time Dependent Materials and Residual Stress, Volume 2 of the Proceedings of the 2023 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the second volume of five from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Advanced Thermographic Techniques for SHM AM Composites and Polymers Experimental Techniques in Biomechanics and Mechanobiology Inverse Methodologies and Uncertainties in the Identification of Residual Stresses, Residual Stress IV Low Cost Thermographic Applications Multiscale Mechanics of Biological Materials NDE and Process Monitoring Residual Stress Thermomechanics Time Dependence in Porous and Soft Materials.

ISBN: 9783031504709

Standard No.: 10.1007/978-3-031-50470-9doiSubjects--Topical Terms:

661337
Biomedical materials
--Congresses.

LC Class. No.: R857.M3

Dewey Class. No.: 610.28

Challenges in mechanics of biological systems and materials, thermomechanics and infrared imaging, time dependent materials and residual stress. = proceedings of the 2023 Annual Conference & Exposition on Experimental and Applied Mechanics /. Volume 2
LDR:03815nmm a2200337 a 4500 001 2368997
003 DE-He213
005 20240226082055.0
006 m d
007 cr nn 008maaau
008 241127s2024 sz s 0 eng d
020 $a 9783031504709 $q (electronic bk.)
020 $a 9783031504693 $q (paper)
024 7 $a 10.1007/978-3-031-50470-9 $2 doi
035 $a 978-3-031-50470-9
040 $a GP $c GP
041 0 $a eng
050 4 $a R857.M3
072 7 $a MQW $2 bicssc
072 7 $a TEC059000 $2 bisacsh
072 7 $a MQW $2 thema
082 0 4 $a 610.28 $2 23
090 $a R857.M3 $b S471 2023
111 2 $a SEM Annual Conference & Exposition on Experimental and Applied Mechanics $d (2023) $3 3713306
245 1 0 $a Challenges in mechanics of biological systems and materials, thermomechanics and infrared imaging, time dependent materials and residual stress. $n Volume 2 $h [electronic resource] : $b proceedings of the 2023 Annual Conference & Exposition on Experimental and Applied Mechanics / $c edited by Christian Franck ... [et al.].
260 $a Cham : $b Springer Nature Switzerland : $b Imprint: Springer, $c 2024.
300 $a vii, 102 p. : $b ill. (some col.), digital ; $c 24 cm.
490 1 $a Conference proceedings of the Society for Experimental Mechanics series, $x 2191-5652
505 0 $a Chapter 1. Development of PEEK matrix polymer composite and additive manufacturing by pellet extrusion method -- Chapter 2. Parkinsonian Hand Tremor Mitigation with Enhanced Wearable Device -- Chapter 3. Quantitative Measurement of Viscoelastic Properties of Soft Membranes Subjected to Finite Deformations based on Optical Coherence Elastography -- Chapter 4. Open Source Contour Method Analysis for Assessing Residual Stress in Weldments -- Chapter 5. Variation of initial bulk residual stresses in aluminum alloy 7050-T7451 and its effect on distortion of thin-walled structural parts -- Chapter 6. On the Use of iDIC (Integrated Digital Image Correlation) for the Slitting Method -- Chapter 7. A rapid procedure to re-construct S/N curve by using harmonic components of thermal signal -- Chapter 8. Rapid Fatigue Characterisation via Infrared Thermography of AM-CM Composites -- Chapter 9. Condition Assessment by Thermal Emission (CATE) for in situ monitoring of fatigue crack growth -- Chapter 10. Effect of geometrical discontinuities on mode shapes stress maps using infrared thermography -- Chapter 11. Induction thermography: influence of testing parameters for different crack geometry -- Chapter 12. Numerical Simulation of the Heat Dissipation During the Fatigue Test -- Chapter 13. A full experimental characterization of aged Nitrile Butadiene Rubbers (NBR) -- Chapter 14. Characterization of the Effect of Cold Joints and Functional Grading in Stepwise Constructed Tensile Dog Bones with Embedded Digital Image Correlation.
520 $a Challenges in Mechanics of Biological Systems and Materials, Thermomechanics and Infrared Imaging, Time Dependent Materials and Residual Stress, Volume 2 of the Proceedings of the 2023 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the second volume of five from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Advanced Thermographic Techniques for SHM AM Composites and Polymers Experimental Techniques in Biomechanics and Mechanobiology Inverse Methodologies and Uncertainties in the Identification of Residual Stresses, Residual Stress IV Low Cost Thermographic Applications Multiscale Mechanics of Biological Materials NDE and Process Monitoring Residual Stress Thermomechanics Time Dependence in Porous and Soft Materials.
650 0 $a Biomedical materials $x Congresses. $3 661337
650 0 $a Biomedical engineering $x Congresses. $3 700709
650 1 4 $a Biomechanical Analysis and Modeling. $3 3595720
650 2 4 $a Biomedical Engineering and Bioengineering. $3 3381533
650 2 4 $a Imaging Techniques. $3 3595537
650 2 4 $a Materials Characterization Technique. $3 3591940
650 2 4 $a Characterization and Analytical Technique. $3 3538501
700 1 $a Franck, Christian. $3 3713307
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer Nature eBook
830 0 $a Conference proceedings of the Society for Experimental Mechanics series. $3 2054689
856 4 0 $u https://doi.org/10.1007/978-3-031-50470-9
950 $a Engineering (SpringerNature-11647)