東華大學圖書館 |

Thermodynamic mechanism of MQL grinding with nano bio-lubricant

Record Type:	Electronic resources : Monograph/item
Title/Author:	Thermodynamic mechanism of MQL grinding with nano bio-lubricant/ by Changhe Li.
Author:	Li, Changhe.
Published:	Singapore :Springer Nature Singapore : : 2024.,
Description:	xxvi, 395 p. :ill., digital ;24 cm.
[NT 15003449]:	Chapter 1. Prolegomenon -- Chapter 2. Prediction model of grinding force under different lubrication conditions based on the principle of material fracture removal and plastic accumulation -- Chapter 3. Velocity effects and material removal mechanical behavior under different lubrication conditions -- Chapter 4. Probability density distribution of droplet size and convective heat transfer mechanism of nano bio-lubricant -- Chapter 5. Design and experimental evaluation of the measurement system for convective heat transfer coefficient of nano bio-lubricant spray Cooling -- Chapter 6. Dynamic model of temperature field in micro-grinding of biological bone cooled by nano bio-lubricant spray -- Chapter 7. Design of orthogonal experiments for grinding titanium alloys under different working conditions and analysis of signal-to-noise ratio and grey correlation -- Chapter 8. Numerical simulation and experimental validation of the temperature field of cryogenic air nano bio-lubricant MQL grinding -- Chapter 9. Experimental study of grinding ratio grinding energy and friction coefficient of cryogenic air nano bio-lubricant MQL grinding -- Chapter 10. The influence of vortex tube cold flow ratio on heat transfer mechanism of cryogenic air nano bio-lubricant MQL grinding -- Chapter 11. The influence of volume fraction of nano bio-lubricant on heat transfer mechanism of cryogenic air nano bio-lubricant MQL grinding -- Chapter 12. MQL grinding mechanism of Al2O3/SiC hybrid nano bio-lubricant and evaluation method of surface morphology -- Chapter 13. The influence of different ratios of Al2O3/SiC hybrid nano-biolubricants on the grinding performance of MQL -- Chapter 14. The influence of different physical synergies of hybrid nanoparticles on MQL grinding performance and microscopic characterization of surface morphology -- Chapter 15. Optimal design of MQL grinding jet parameters for nano bio-lubricant and evaluation of power spectral density functions for MQL.
Contained By:	Springer Nature eBook
Subject:	Grinding wheels. -
Online resource:	https://doi.org/10.1007/978-981-99-6265-5
ISBN:	9789819962655

Thermodynamic mechanism of MQL grinding with nano bio-lubricant
Li, Changhe.

Thermodynamic mechanism of MQL grinding with nano bio-lubricant[electronic resource] /by Changhe Li. - Singapore :Springer Nature Singapore :2024. - xxvi, 395 p. :ill., digital ;24 cm.

Chapter 1. Prolegomenon -- Chapter 2. Prediction model of grinding force under different lubrication conditions based on the principle of material fracture removal and plastic accumulation -- Chapter 3. Velocity effects and material removal mechanical behavior under different lubrication conditions -- Chapter 4. Probability density distribution of droplet size and convective heat transfer mechanism of nano bio-lubricant -- Chapter 5. Design and experimental evaluation of the measurement system for convective heat transfer coefficient of nano bio-lubricant spray Cooling -- Chapter 6. Dynamic model of temperature field in micro-grinding of biological bone cooled by nano bio-lubricant spray -- Chapter 7. Design of orthogonal experiments for grinding titanium alloys under different working conditions and analysis of signal-to-noise ratio and grey correlation -- Chapter 8. Numerical simulation and experimental validation of the temperature field of cryogenic air nano bio-lubricant MQL grinding -- Chapter 9. Experimental study of grinding ratio grinding energy and friction coefficient of cryogenic air nano bio-lubricant MQL grinding -- Chapter 10. The influence of vortex tube cold flow ratio on heat transfer mechanism of cryogenic air nano bio-lubricant MQL grinding -- Chapter 11. The influence of volume fraction of nano bio-lubricant on heat transfer mechanism of cryogenic air nano bio-lubricant MQL grinding -- Chapter 12. MQL grinding mechanism of Al2O3/SiC hybrid nano bio-lubricant and evaluation method of surface morphology -- Chapter 13. The influence of different ratios of Al2O3/SiC hybrid nano-biolubricants on the grinding performance of MQL -- Chapter 14. The influence of different physical synergies of hybrid nanoparticles on MQL grinding performance and microscopic characterization of surface morphology -- Chapter 15. Optimal design of MQL grinding jet parameters for nano bio-lubricant and evaluation of power spectral density functions for MQL.

This book discusses the thermodynamic mechanism of MQL grinding with nano-biological lubricant from the force, heat, surface integrity, and micro-morphology. It makes up the fatal defect of the lack of heat transfer capability of traditional MQL grinding. The machining accuracy, surface quality, especially surface integrity of the workpiece, are significantly improved; at the same time, the service life of the grinding wheel is increased and the working environment is improved. The general scope of the book's content is the effects of MQL grinding with nano-bio-lubricant on grinding force, thermal mechanism, and surface. It provides a new method of sustainable green grinding for environment-friendly, resource-saving, and energy-efficient utilization and solves the technical bottleneck of the insufficient capacity in MQL heat transfer.

ISBN: 9789819962655

Standard No.: 10.1007/978-981-99-6265-5doiSubjects--Topical Terms:

3452536
Grinding wheels.

LC Class. No.: TJ1293

Dewey Class. No.: 660.28422

Thermodynamic mechanism of MQL grinding with nano bio-lubricant
LDR:03795nmm a2200325 a 4500 001 2367943
003 DE-He213
005 20231030214655.0
006 m d
007 cr nn 008maaau
008 241127s2024 si s 0 eng d
020 $a 9789819962655 $q (electronic bk.)
020 $a 9789819962648 $q (paper)
024 7 $a 10.1007/978-981-99-6265-5 $2 doi
035 $a 978-981-99-6265-5
040 $a GP $c GP
041 0 $a eng
050 4 $a TJ1293
072 7 $a TC $2 bicssc
072 7 $a TEC009010 $2 bisacsh
072 7 $a TC $2 thema
082 0 4 $a 660.28422 $2 23
090 $a TJ1293 $b .L693 2024
100 1 $a Li, Changhe. $3 3711474
245 1 0 $a Thermodynamic mechanism of MQL grinding with nano bio-lubricant $h [electronic resource] / $c by Changhe Li.
260 $a Singapore : $b Springer Nature Singapore : $b Imprint: Springer, $c 2024.
300 $a xxvi, 395 p. : $b ill., digital ; $c 24 cm.
505 0 $a Chapter 1. Prolegomenon -- Chapter 2. Prediction model of grinding force under different lubrication conditions based on the principle of material fracture removal and plastic accumulation -- Chapter 3. Velocity effects and material removal mechanical behavior under different lubrication conditions -- Chapter 4. Probability density distribution of droplet size and convective heat transfer mechanism of nano bio-lubricant -- Chapter 5. Design and experimental evaluation of the measurement system for convective heat transfer coefficient of nano bio-lubricant spray Cooling -- Chapter 6. Dynamic model of temperature field in micro-grinding of biological bone cooled by nano bio-lubricant spray -- Chapter 7. Design of orthogonal experiments for grinding titanium alloys under different working conditions and analysis of signal-to-noise ratio and grey correlation -- Chapter 8. Numerical simulation and experimental validation of the temperature field of cryogenic air nano bio-lubricant MQL grinding -- Chapter 9. Experimental study of grinding ratio grinding energy and friction coefficient of cryogenic air nano bio-lubricant MQL grinding -- Chapter 10. The influence of vortex tube cold flow ratio on heat transfer mechanism of cryogenic air nano bio-lubricant MQL grinding -- Chapter 11. The influence of volume fraction of nano bio-lubricant on heat transfer mechanism of cryogenic air nano bio-lubricant MQL grinding -- Chapter 12. MQL grinding mechanism of Al2O3/SiC hybrid nano bio-lubricant and evaluation method of surface morphology -- Chapter 13. The influence of different ratios of Al2O3/SiC hybrid nano-biolubricants on the grinding performance of MQL -- Chapter 14. The influence of different physical synergies of hybrid nanoparticles on MQL grinding performance and microscopic characterization of surface morphology -- Chapter 15. Optimal design of MQL grinding jet parameters for nano bio-lubricant and evaluation of power spectral density functions for MQL.
520 $a This book discusses the thermodynamic mechanism of MQL grinding with nano-biological lubricant from the force, heat, surface integrity, and micro-morphology. It makes up the fatal defect of the lack of heat transfer capability of traditional MQL grinding. The machining accuracy, surface quality, especially surface integrity of the workpiece, are significantly improved; at the same time, the service life of the grinding wheel is increased and the working environment is improved. The general scope of the book's content is the effects of MQL grinding with nano-bio-lubricant on grinding force, thermal mechanism, and surface. It provides a new method of sustainable green grinding for environment-friendly, resource-saving, and energy-efficient utilization and solves the technical bottleneck of the insufficient capacity in MQL heat transfer.
650 0 $a Grinding wheels. $3 3452536
650 0 $a Lubrication and lubricants. $3 667880
650 0 $a Nanofluids. $3 1097247
650 1 4 $a Bioprocess Engineering. $3 3591868
650 2 4 $a Thermal Process Engineering. $3 3592859
650 2 4 $a Machines, Tools, Processes. $3 3538881
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer Nature eBook
856 4 0 $u https://doi.org/10.1007/978-981-99-6265-5
950 $a Engineering (SpringerNature-11647)