東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Linked to FindBook

Google Book

Amazon

博客來

Multi-Material 3D-Printed Silicone Vocal Fold Models.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Multi-Material 3D-Printed Silicone Vocal Fold Models./
Author:	Young, Clayton Adam.
Description:	1 online resource (147 pages)
Notes:	Source: Masters Abstracts International, Volume: 84-03.
Contained By:	Masters Abstracts International84-03.
Subject:	Software. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=29282695click for full text (PQDT)
ISBN:	9798845454072

Multi-Material 3D-Printed Silicone Vocal Fold Models.
Young, Clayton Adam.

Multi-Material 3D-Printed Silicone Vocal Fold Models. - 1 online resource (147 pages)

Source: Masters Abstracts International, Volume: 84-03.

Thesis (M.Sc.)--Brigham Young University, 2022.

Includes bibliographical references

Self-oscillating synthetic vocal fold (VF) models are often used to study human voice production. In this thesis, a method for fabricating multi-layer self-oscillating synthetic VF models using silicone 3D printing is presented. Multi-material 3D printing enables faster fabrication times with more complex geometries than traditional casting methods and builds a foundation for producing VF models with potentially more life-like geometries, materials, and vibratory characteristics.The printing method in this study used a custom dual extruder and slicing software to print UV-curable liquid silicone into a gel-like support matrix. The extruder was fabricated using high-torque stepper motors with high resolution leadscrews for precise extrusion and retraction. The custom slicing software accounted for challenges with printing a low-viscosity uncured silicone and was capable of allowing the user to visually observe the effects of print settings on print paths before finalizing the g-code. Three validation tests were conducted to demonstrate the 3D printer's ability to print ultra-soft silicone with the desired range of stiffness, change between materials quickly, and print a material stiffness gradient. Two types of VF models were printed in this study, a previously-designed model with multiple distinct layers ("EPI" model), and the same model but with a vertical stiffness gradient (VSG) in the superficial lamina propria layer. The EPI model was chosen to demonstrate the ability to 3D print a multi-layer model, and the VSG model was chosen to demonstrate the ability to print multi-material VFs with geometric and material properties that are difficult to fabricate using traditional casting methods. Sixteen VFs (i.e., eight pairs) of each model type were printed, and their vibratory responses were recorded, including onset pressure, frequency, and glottal width. A micro-CT scanner was used to evaluate the external geometric accuracy of the models. One-centimeter cubes were 3D printed and tensile tested to characterize the material properties of each set of VF models. The material and phonatory properties of both the EPI and VSG VF models were found to be comparable to human data and to previous data acquired using synthetic VF models fabricated via other methods. In this thesis, the 3D printing methodology is summarized, the setup and results of the validation and VF model tests are reported and discussed, and recommendations for future work are provided.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2023

Mode of access: World Wide Web

ISBN: 9798845454072Subjects--Topical Terms:

619355
Software.
Index Terms--Genre/Form:

542853
Electronic books.

Multi-Material 3D-Printed Silicone Vocal Fold Models.
LDR:03740nmm a2200373K 4500 001 2363766
005 20231127094552.5
006 m o d
007 cr mn ---uuuuu
008 241011s2022 xx obm 000 0 eng d
020 $a 9798845454072
035 $a (MiAaPQ)AAI29282695
035 $a (MiAaPQ)BrighamYoung10521
035 $a AAI29282695
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Young, Clayton Adam. $3 3704542
245 1 0 $a Multi-Material 3D-Printed Silicone Vocal Fold Models.
264 0 $c 2022
300 $a 1 online resource (147 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 84-03.
500 $a Advisor: Thomson, Scott L.
502 $a Thesis (M.Sc.)--Brigham Young University, 2022.
504 $a Includes bibliographical references
520 $a Self-oscillating synthetic vocal fold (VF) models are often used to study human voice production. In this thesis, a method for fabricating multi-layer self-oscillating synthetic VF models using silicone 3D printing is presented. Multi-material 3D printing enables faster fabrication times with more complex geometries than traditional casting methods and builds a foundation for producing VF models with potentially more life-like geometries, materials, and vibratory characteristics.The printing method in this study used a custom dual extruder and slicing software to print UV-curable liquid silicone into a gel-like support matrix. The extruder was fabricated using high-torque stepper motors with high resolution leadscrews for precise extrusion and retraction. The custom slicing software accounted for challenges with printing a low-viscosity uncured silicone and was capable of allowing the user to visually observe the effects of print settings on print paths before finalizing the g-code. Three validation tests were conducted to demonstrate the 3D printer's ability to print ultra-soft silicone with the desired range of stiffness, change between materials quickly, and print a material stiffness gradient. Two types of VF models were printed in this study, a previously-designed model with multiple distinct layers ("EPI" model), and the same model but with a vertical stiffness gradient (VSG) in the superficial lamina propria layer. The EPI model was chosen to demonstrate the ability to 3D print a multi-layer model, and the VSG model was chosen to demonstrate the ability to print multi-material VFs with geometric and material properties that are difficult to fabricate using traditional casting methods. Sixteen VFs (i.e., eight pairs) of each model type were printed, and their vibratory responses were recorded, including onset pressure, frequency, and glottal width. A micro-CT scanner was used to evaluate the external geometric accuracy of the models. One-centimeter cubes were 3D printed and tensile tested to characterize the material properties of each set of VF models. The material and phonatory properties of both the EPI and VSG VF models were found to be comparable to human data and to previous data acquired using synthetic VF models fabricated via other methods. In this thesis, the 3D printing methodology is summarized, the setup and results of the validation and VF model tests are reported and discussed, and recommendations for future work are provided.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2023
538 $a Mode of access: World Wide Web
650 4 $a Software. $2 gtt. $3 619355
650 4 $a Silicones. $3 560462
650 4 $a Larynx. $3 2195421
650 4 $a 3-D printers. $3 3681750
650 4 $a Design. $3 518875
650 4 $a Medical imaging. $3 3172799
650 4 $a Curing. $3 3681399
650 4 $a Animation. $3 2032987
650 4 $a Geometry. $3 517251
650 4 $a Ligaments. $3 3562651
650 4 $a Computer science. $3 523869
650 4 $a Mathematics. $3 515831
650 4 $a Polymer chemistry. $3 3173488
655 7 $a Electronic books. $2 lcsh $3 542853
690 $a 0389
690 $a 0574
690 $a 0984
690 $a 0405
690 $a 0495
710 2 $a ProQuest Information and Learning Co. $3 783688
710 2 $a Brigham Young University. $3 1017451
773 0 $t Masters Abstracts International $g 84-03.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=29282695 $z click for full text (PQDT)